INA157UA vs INA154U مقایسه
مقایسه دقیق کنار به کنار INA157UA توسط Texas Instruments و INA154U توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | INA157UA | INA154U |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | Amplifier ICs | Amplifier ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Device Type | High-speed, precision difference amplifier | — |
| Number of Amplifier Channels | 1 channel | — |
| Bandwidth | 4 MHz | 3 MHz |
| Offset Voltage | ±500 µV maximum | — |
| Offset Voltage Drift | ±2 µV/°C maximum | — |
| Gain Error | ±0.05% maximum | ±0.05% maximum |
| Differential Gain | 1 V/V | — |
| Internal Resistor Network | Precision, laser-trimmed | — |
| بسته‌بندی | 8-pin SOIC (D) | 8-pin SOIC |
| نوع نصب | Surface mount | Surface mount |
| محدوده دمای کاری | -55 °C to +125 °C | -40°C to +85°C |
| ولتاژ تغذیه | [DATA_NEEDED: supply voltage range] | — |
| Maximum Output Voltage | [DATA_NEEDED: maximum output voltage] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| جریان سکون | [DATA_NEEDED: quiescent current] | 2.4 mA typical |
| جریان تغذیه | [DATA_NEEDED: supply current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 14 V/µs typical |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 80 dB minimum |
| وضعیت RoHS | unknown | unknown |
| REACH Status | unknown | unknown |
| AEC-Q100 Qualification | not_applicable | unknown |
| Product Type | — | High-speed, precision difference amplifier (G = 1) |
| Number of Channels | — | 1 circuit |
| Gain | — | 1 |
| Input Offset Voltage | — | ±750 µV maximum |
| Input Offset Drift | — | ±2 µV/°C |
| Supply Voltage Range | — | ±15 V to ±18 V; exact operating range is [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Range | — | -25 V to +25 V |
| Input Resistor Network | — | Integrated precision resistor network; resistor absolute tolerance is ±20% |