ISO6442 vs ISO6442-Q1 مقایسه
مقایسه دقیق کنار به کنار ISO6442 توسط Texas Instruments و ISO6442-Q1 توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
ISO6442 - Quad-Channel Digital Isolator 150Mbps | Texas Instruments
ISO6442 ✓ فعال
مقایسه مشخصات
| پارامتر | ISO6442 | ISO6442-Q1 |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | Digital Isolators | Digital Isolators |
| وضعیت چرخه عمر | فعال | فعال |
| Channel Configuration | 4-channel, 2 forward / 2 reverse (2/2) | — |
| Maximum Data Rate | 150 Mbps | — |
| CMTI | 250 kV/us (typical); 150 kV/us minimum on DWR | 250 kV/us |
| Isolation Rating (DWR) | 5000 Vrms (reinforced) | — |
| Isolation Rating (DBQ) | 3000 Vrms (basic) | — |
| Supply Voltage Range (Side 1) | 2.25 V to 5.5 V | — |
| Supply Voltage Range (Side 2) | 2.25 V to 5.5 V | — |
| Default Output (Power/Signal Loss) | High (ISO6442); Low for ISO6442F | — |
| Package (DWR) | 16-SOIC, 7.50 mm width | — |
| Package (DBQ) | 16-SSOP (QSOP), 3.90 mm width | — |
| نوع نصب | Surface Mount | Surface Mount |
| Enable Pins | Yes (tri-state output control) | Yes (per-direction tri-state) |
| Isolation Technology | Capacitive (SiO2 dielectric) | Capacitive (TI) |
| EMC Performance | Robust EMC | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| دمای کاری | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| کانال‌ها | — | 4 (2 forward / 2 reverse) |
| نرخ داده | — | 150 Mbps |
| Isolation Rating | — | Reinforced / Basic |
| Surge Isolation Voltage (DBQ package) | — | 3000 Vrms |
| Default Output State | — | High (low for ISO6442F-Q1) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Packages | — | DW-16 wide SOIC, DFP-16 wide SSOP, DBQ-16 SSOP |
| Functional Safety Support | — | FIT rate and pin FMA document (SFFSB42) |
| ولتاژ تغذیه | — | [DATA_NEEDED: supply voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |