MAX3488CSA+ vs MAX3483ESA+ مقایسه
مقایسه دقیق کنار به کنار MAX3488CSA+ توسط Analog Devices و MAX3483ESA+ توسط Maxim Integrated. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ فعالمقایسه مشخصات
| پارامتر | MAX3488CSA+ | MAX3483ESA+ |
|---|---|---|
| برند | Analog Devices | Maxim Integrated |
| دسته‌بندی | Interface ICs | Interface ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| ولتاژ تغذیه | 3.3 V | 3.3 V |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Control | Slew-rate limited | — |
| Communication Standard | RS-485/RS-422 | — |
| بسته‌بندی | 8-pin NSOIC | 8-SOIC |
| نوع نصب | Surface mount | Surface mount |
| Low-Power Family | 3.3 V, low-power transceiver | — |
| Cable Reflection Control | Slew-rate-limited driver intended to reduce reflections | — |
| EMI Control | Slew-rate-limited driver intended to reduce EMI | Slew-rate limitation reduces EMI and reflections |
| Application Topology | RS-422 point-to-point and RS-485 multidrop | — |
| Differential Signal | Balanced line signaling | — |
| Logic Interface | Digital logic-level driver and receiver | — |
| Manufacturer Product Status | Production | — |
| Manufacturer Data Sheet Revision | Rev. 2 | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| دمای کاری | [DATA_NEEDED: operating temperature range] | — |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| Typical Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Isolation | [DATA_NEEDED: isolation rating] | — |
| Verified Supply Range | — | 3 V to 3.6 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Interface Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| Low-Speed Error-Free Transmission | — | Up to 250 kbps |
| Power Architecture | — | 3.3V-powered, low-power transceiver |
| Operating Voltage | — | 3 V to 3.6 V |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] |
| محدوده دمای کاری | — | [DATA_NEEDED: operating temperature range] |
| جریان تغذیه | — | [DATA_NEEDED: supply current] |
| Receiver Output Type | — | [DATA_NEEDED: receiver output type] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing details] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |