MSP430F417IPM vs MSP430F412IPM مقایسه
مقایسه دقیق کنار به کنار MSP430F417IPM توسط Texas Instruments و MSP430F412IPM توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
MSP430F412IPM - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F412IPM ✓ فعالمقایسه مشخصات
| پارامتر | MSP430F417IPM | MSP430F412IPM |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | Microcontrollers | Microcontrollers |
| وضعیت چرخه عمر | فعال | فعال |
| Core Architecture | MSP430 CPU16 (RISC, 16-bit) | — |
| Series | MSP430x4xx | — |
| حداکثر فرکانس کلاک | 8 MHz | 8 MHz |
| Instruction Cycle Time | 125 ns | — |
| Program Memory (Flash) | 32 KB (32K x 8 + 256B) | — |
| SRAM | 1 KB | 256 bytes |
| Supply Voltage Range | 1.8 V to 3.6 V | [DATA_NEEDED: Supply voltage range] |
| Active Mode Current (1 MHz, 2.2 V) | 200 µA | — |
| Standby Mode Current | 0.7 µA | — |
| Off Mode Current (RAM Retention) | 0.1 µA | — |
| Wake-Up Time from Standby | < 6 µs | — |
| Power-Saving Modes | 5 | — |
| Clock System | FLL+ (Frequency-Locked Loop) | — |
| LCD Driver | 96 segments | — |
| Timers | 16-bit Timer_A | — |
| Analog Comparator | Yes | — |
| Scan Interface (Scan IF) | Yes | — |
| GPIO Pins | 48 | — |
| بسته‌بندی | 64-pin LQFP (PM, 10x10 mm) | 64-pin LQFP (PM), 10 mm x 10 mm |
| نوع نصب | Surface Mount | Surface mount |
| دمای کاری | -40°C to +85°C (Industrial) | — |
| وضعیت RoHS | Compliant (Green Package) | [DATA_NEEDED: RoHS status] |
| Product Type | — | 16-bit ultra-low-power RISC microcontroller |
| Minimum Instruction Cycle Time | — | 125 ns |
| Flash Memory | — | 4 KB (4K x 8) |
| CPU Architecture | — | 16-bit RISC |
| Register Width | — | 16-bit |
| Timer | — | 16-bit Timer_A |
| Comparator | — | Integrated comparator |
| LCD Segment Support | — | 96 segments |
| Low-Power Modes | — | 5 modes |
| محدوده دمای کاری | — | -40 °C to +85 °C |
| Ordering Code | — | PM |
| Flash Wait States | — | [DATA_NEEDED: Flash wait-state configuration] |
| REACH Status | — | [DATA_NEEDED: REACH status] |