NE5534P vs NE5534AP مقایسه
مقایسه دقیق کنار به کنار NE5534P توسط Texas Instruments و NE5534AP توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | NE5534P | NE5534AP |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | Amplifier ICs | Amplifier ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Amplifier Type | Single operational amplifier | Single operational amplifier |
| ولتاژ تغذیه | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | 3.5 nV/sqrt(Hz) typical |
| Slew Rate | 13 V/µs typical | 9 V/us listed |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| DC Voltage Gain | 100 V/V typical | 100 V/mV typical |
| Output Voltage Swing | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω | — |
| Number of Amplifiers | 1 | — |
| بسته‌بندی | 8-pin PDIP | 8-pin PDIP |
| نوع نصب | Through-hole | Through-hole |
| محدوده دمای کاری | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| جریان سکون | [DATA_NEEDED: quiescent current] | — |
| وضعیت RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 status] |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Conflict Minerals Status | unknown | — |
| Maximum Supply Voltage | — | 30 V |
| Nominal Supply Range | — | +/-5 V to +/-15 V |
| Alternate Slew Rate Listing | — | 13 V/us listed |
| Peak-to-Peak Output Swing | — | 32 V typical at +/-18 V |
| RoHS Compliance | — | [DATA_NEEDED: RoHS status] |
| REACH Compliance | — | [DATA_NEEDED: REACH status] |