ST202BDR vs MAX202IDR مقایسه
مقایسه دقیق کنار به کنار ST202BDR توسط STMicroelectronics و MAX202IDR توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Texas Instruments
MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDR ✓ فعالمقایسه مشخصات
| پارامتر | ST202BDR | MAX202IDR |
|---|---|---|
| برند | STMicroelectronics | Texas Instruments |
| دسته‌بندی | Interface ICs | Interface ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Device Type | RS-232 Transceiver (2 Drivers / 2 Receivers) | — |
| Protocol Standard | EIA/TIA-232, V.28 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Supply Current, No Load (Typ) | 1.5 mA | — |
| نرخ داده | 400 kbps | — |
| Transmitter Output Voltage Swing (Typ) | +/- 9 V | — |
| Transition Slew Rate (Typ) | 12 V/us | — |
| Receiver Propagation Delay (Typ) | 0.1 us | — |
| Receiver Input Voltage Range | +/- 30 V | — |
| External Capacitors Required | 4 x 0.1 uF | — |
| Pin Compatibility | Compatible with MAX202 | — |
| محدوده دمای کاری | -40C to +85C | -40 °C to +85 °C |
| بسته‌بندی | SOIC-16 (SO-16) | 16-pin SOIC |
| نوع نصب | Surface Mount | Surface mount |
| تعداد پین‌ها | 16 | — |
| Power Supply | Single 5 V | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Product Type | — | 5 V dual RS-232 line driver/receiver |
| Channel Configuration | — | 2 line drivers and 2 line receivers |
| Maximum Data Rate | — | 120 kbps |
| ولتاژ تغذیه | — | 5 V nominal |
| Driver Output Levels | — | ±9 V |
| ESD Protection | — | ±15 kV human-body-model protection |
| External Charge-Pump Capacitors | — | Four 0.1 µF capacitors |
| Interface Standard | — | TIA/EIA-232-F |
| Transceiver Type | — | Full-duplex 2/2 RS-232 transceiver |
| Logic Compatibility | — | TTL/CMOS logic-level interface |
| ESD Coverage | — | Serial-port connection pins, including ground |
| Quoted Output Signal Levels | — | ±5 V EIA/TIA-232E under specified loading |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |