Analog Devices

AD8018ARU - 5V High-Output xDSL Line Driver | Analog Devices

MPN: AD8018ARU ✓ فعال
5 V Vdss 14-lead TSSOP Package
حداقل سفارش: 1 |

AD8018ARU نمای کلی

Analog Devices AD8018ARU is a 5 V, rail-to-rail, high-output-current xDSL line-drive amplifier packaged in a 14-lead TSSOP. It is intended for single-supply xDSL modem designs where high output-current capability and low distortion are required to maximize line reach. The device is a dual 2/0 driver, allowing two driver channels to be implemented in one compact package.

An xDSL line-drive amplifier is an interface amplifier that develops the voltage and current needed to drive a telephone-line or network-copper transmission channel. It sits within the signal chain as a line interface IC between modulation, filtering, and line coupling components. Its broader category is an interface amplifier, while its functional role is a rail-to-rail high-output-current line driver designed specifically for xDSL customer-premises equipment.

The AD8018 family provides rail-to-rail operation from a 5 V supply and emphasizes low distortion and high output-current drive. These characteristics are important in xDSL systems because the line driver must generate a large enough signal through resistive, capacitive, and transformer-coupled line networks without excessive clipping or harmonic distortion. The high-output-current capability also helps designers obtain greater transmit voltage into challenging downstream loads.

Its 14-lead TSSOP construction supports compact modem and line-card designs while providing separate channels for dual-driver implementations. The AD8018ARU ordering suffix identifies the surface-mount package configuration used by the target device. Analog Devices also offers the AD8018ARU-EVAL evaluation board, enabling engineers to assess the line-driver circuit with its associated external components before integrating the IC into production equipment.

Typical uses include ADSL, SDSL, VDSL, and proprietary xDSL systems, as well as USB, PCMCIA, and PCI customer-premises equipment. In these applications, the AD8018 provides the output-drive stage needed to transmit modulated data over copper. The rail-to-rail architecture supports efficient signal swing from a single 5 V rail, while the low-distortion emphasis helps preserve signal quality across the transmission bandwidth.

Designers should pay particular attention to output-current demand, load impedance, transformer or filter selection, supply bypassing, and thermal behavior. Decoupling capacitors should be placed close to the supply and ground pins, and the output network must be designed around the driver’s current capability. Because an xDSL line interface can create substantial dynamic drive demand, PCB copper and return paths should be evaluated for voltage drop and unwanted coupling.

This product page combines the manufacturer’s device description, verified distributor information, package details, application guidance, and practical implementation considerations. It also distinguishes exact device ordering variants from true drop-in replacements, helping engineers make sourcing and circuit-design decisions based on the AD8018ARU identity rather than on a superficially similar xDSL driver.

جایگزین‌های drop-in برای AD8018ARU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

AD8018ARU-REEL

✅ جایگزین مستقیم
📦 14-lead TSSOP
Same AD8018 function, pins, and 14-lead TSSOP configuration; the ordering suffix changes reel packaging, with 0% change to key device ratings.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD8018ARU-REEL7

✅ جایگزین مستقیم
📦 14-lead TSSOP
Same 2/0 driver and 14-lead TSSOP configuration; the ordering suffix changes the supplied reel format, with 0% change to key device ratings.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD8018ARUZ-REEL

✅ جایگزین مستقیم
📦 14-lead TSSOP
Same AD8018 line-driver function, terminals, and 14-lead TSSOP package; the Z and REEL suffixes affect ordering or packaging, with 0% change to key device ratings.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD8018ARUZ

✅ جایگزین مستقیم
📦 14-lead TSSOP
Same AD8018 line-driver function and 14-lead TSSOP configuration; the suffix identifies the ordering form, with 0% change to key device ratings.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD8018ARU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Dual xDSL line-drive amplifier
ولتاژ تغذیه 5 V
Signal Architecture 2/0 driver per channel
پیکربندی خروجی Rail-to-rail
Number of Channels 2 channels
Key Performance Emphasis High output-current drive
بسته‌بندی 14-lead TSSOP
نوع نصب Surface mount

راهنمای پیکربندی پین AD8018ARU 14-lead tssop

پیکربندی پین برای AD8018ARU (پکیج 14-lead tssop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 14-lead tssop برای AD8018ARU

داده پین‌آوت تفصیلی موجود نیست برای AD8018ARU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD8018ARU مناسب است برای 6 کاربردs: VDSL Modem Transmit Driver, ADSL Customer-Premises Equipment, SDSL Line Interface, USB Modem Transmitter, PCMCIA xDSL Card, Proprietary Copper-Line Interface.

🌐

VDSL Modem Transmit Driver

The AD8018ARU fits a VDSL modem transmit path because it combines a 5 V single-supply architecture, rail-to-rail output drive, and high output-current capability. It is intended to develop the signal level required by a copper-line interface while maintaining low distortion. In the circuit, the dual 2/0 drivers feed the line transformer and associated filtering network. Designers should verify bandwidth, slew rate, output-current margin, and thermal dissipation against the actual VDSL line impedance. The device’s 14-lead TSSOP package also permits a compact line-card implementation without using two separate single-channel packages.

📶

ADSL Customer-Premises Equipment

The AD8018ARU is applicable to ADSL customer-premises equipment where the transmitter must drive a line network through a transformer or coupling network from a single 5 V rail. Its rail-to-rail output stage supports efficient signal development, while the high output-current drive helps reduce the distortion associated with heavy line loading. The two channels can serve transmit and related line-interface functions when the circuit topology permits. Engineers should use the manufacturer data sheet to confirm channel configuration, output isolation requirements, and external component values before finalizing the modem design.

🌐

SDSL Line Interface

The AD8018ARU can serve as the line-drive stage in an SDSL modem because the device was designed for single-supply xDSL systems requiring strong output drive and low distortion. Its dual-channel 2/0 organization permits two line-driver functions in one 14-lead TSSOP, which can simplify routing in a compact access-equipment design. The line network remains a sensitive high-current interface, so the output transformer, termination, protection components, and PCB return paths must be designed together. Confirm channel enable and isolation behavior from the manufacturer pin table before parallel or sequenced operation.

🔌

USB Modem Transmitter

The AD8018ARU is suitable for the transmit-side line interface of a 5 V USB modem, an application explicitly identified by Analog Devices for the AD8018 family. The rail-to-rail output and high output-current drive provide the interface amplifier with the ability to develop a usable signal into the downstream network. Place the device near the coupling network to minimize trace impedance and coupling into adjacent circuitry. The external transformer, filters, and protection network remain essential, and the complete channel should be evaluated for distortion, thermal load, and unwanted emissions.

💻

PCMCIA xDSL Card

The 14-lead TSSOP AD8018ARU is appropriate for space-constrained PCMCIA xDSL cards requiring a dedicated line-driver stage. Its dual 2/0 configuration can support multiple transmit-related functions while conserving board area, and its 5 V operating rail matches the application described by the manufacturer. The compact package still requires careful thermal and layout treatment because high output-current operation can concentrate heat near the leads. Keep the line-network components and high-current return path compact, and use the evaluation board to validate loading and signal-integrity conditions before production layout.

🔧

Proprietary Copper-Line Interface

The AD8018ARU can be used in proprietary xDSL and other copper-line transmitter designs when its 5 V rail-to-rail architecture and high output-current drive meet the interface requirements. The low-distortion emphasis is valuable where accurate signal generation affects receiver performance or maximum line reach. A practical implementation places the dual driver behind modulation and filtering stages, then feeds a line transformer or designed coupling network. Validate the output current, allowable load, operating temperature, and distortion using the exact line impedance rather than relying only on nominal xDSL application labels.

خلاصه محصولات پیشنهادی

AD8018ARU Analog Devices استفاده‌شده در: VDSL Modem Transmit Driver, ADSL Customer-Premises Equipment, SDSL Line Interface, USB Modem Transmitter, PCMCIA xDSL Card, Proprietary Copper-Line Interface AD8018ARU-EVAL Evaluation platform for the AD8018 line-driver application استفاده‌شده در: VDSL Modem Transmit Driver, ADSL Customer-Premises Equipment, SDSL Line Interface, USB Modem Transmitter, PCMCIA xDSL Card, Proprietary Copper-Line Interface
What is the AD8018ARU used for?
The AD8018ARU is a dual 2/0 xDSL line-drive amplifier intended for 5 V single-supply customer-premises equipment. Analog Devices describes the device for ADSL, SDSL, VDSL, proprietary xDSL systems, USB, PCMCIA, and PCI equipment. Its rail-to-rail operation, high output-current drive, and low-distortion emphasis make it suitable for the output stage of an xDSL line interface. The 14-lead TSSOP package supports compact modem and line-card designs.
Is the AD8018ARU a single or dual amplifier?
The AD8018ARU is a dual 2/0 driver, providing two driver channels in one 14-lead TSSOP package. A 2/0 stage is used to develop a line-drive output with substantial voltage and current capability. The device is optimized for single-supply xDSL modem designs rather than generic low-voltage signal processing. Confirm channel enable, shutdown, and output-isolation details against the manufacturer pin-description table before finalizing a PCB.
What supply voltage does the AD8018ARU operate from?
The AD8018ARU operates from a nominal 5 V single supply and uses a rail-to-rail output architecture. The Analog Devices product description specifically identifies a 5 V xDSL line-drive amplifier with high output-current drive and low distortion. Its input, output, common-mode, and absolute-maximum limits should be taken from the manufacturer datasheet when checking unusual bus voltages or startup conditions. Place the required bypass capacitors directly beside the supply and ground pins.
Where can I download the AD8018ARU datasheet PDF?
The official AD8018ARU documentation is available through the Analog Devices AD8018 product page at https://www.analog.com/en/products/ad8018.html, which links the manufacturer data sheet and evaluation-board information. The page identifies the AD8018ARU-EVAL evaluation board for laboratory assessment. Use the manufacturer PDF for the complete electrical characteristics, pin-description table, package drawing, ordering information, and recommended application circuit rather than relying on abbreviated catalog summaries.
Where is the AD8018ARU pinout located?
The AD8018ARU pinout is located in the pin-description table and package drawing within the Analog Devices AD8018 manufacturer data sheet. The device is offered in a 14-lead TSSOP package. Use that table to assign channel inputs, outputs, supplies, grounds, and control functions before routing the PCB. The AD8018ARU-EVAL evaluation board can also be used to verify the intended application topology and external line-coupling network.
Is the AD8018ARU suitable for VDSL line driving?
Yes, the AD8018ARU is suitable for VDSL transmitter line-drive circuitry when the operating conditions match the manufacturer’s specified limits. Analog Devices identifies the AD8018 family for ADSL, SDSL, VDSL, and proprietary xDSL systems, emphasizing high output-current drive and low distortion. The external line transformer, filters, termination network, and impedance must be designed together with the amplifier’s output-current capability and thermal dissipation.
AD8018ARU vs AD8018ARU-REEL — are they drop-in replacements?
The AD8018ARU and AD8018ARU-REEL share the same 14-lead TSSOP device configuration and electrical function, but the suffix primarily identifies the supplied packaging format. Cross-reference information describes them as having consistent terminals, packages, and functional characteristics. Confirm the manufacturer ordering table for reel quantity, tape orientation, and moisture handling before treating one as a production substitute for the other. PCB land patterns and pin functions remain unchanged.
What is the best drop-in replacement for AD8018ARU?
The closest identified drop-in choice is AD8018ARU-REEL, a 14-lead TSSOP ordering variant reported to retain consistent terminals, package, and functional characteristics. AD8018ARU-REEL7 and AD8018ARUZ-REEL also appear in distributor and cross-reference listings for the same device family. No independently verified cross-brand, pin-compatible 5 V xDSL driver was established, so the AD8018 family should be preferred while its exact suffix and electrical table are checked.
Can AD8018ARU-REEL replace AD8018ARU without PCB changes?
Yes, AD8018ARU-REEL can replace AD8018ARU without changing the board layout when both parts use the identical 14-lead TSSOP pinout and electrical configuration. The comparison information explicitly describes consistent terminals, packages, and functional characteristics. Packaging, reel quantity, and handling requirements can still differ, so verify the exact Analog Devices ordering table and moisture-packaging requirements before production release. No circuit redesign is expected when those conditions are met.
When should I choose AD8018ARU over another xDSL line driver?
Choose the AD8018ARU when a 5 V single-supply, dual-channel xDSL output stage needs rail-to-rail operation and strong output-current drive in a 14-lead TSSOP package. The AD8018 family is specifically positioned for ADSL, SDSL, VDSL, and proprietary line-driver applications. Before selecting it, compare the competing device’s output-current limit, distortion, bandwidth, slew rate, shutdown behavior, thermal rating, and exact pinout rather than relying only on the xDSL label.
Is the AD8018ARU suitable for a 5 V USB modem?
The AD8018ARU can support the line-driver requirement in a 5 V USB or PCMCIA modem when its specified electrical limits meet the design. Analog Devices explicitly lists USB, PCMCIA, and PCI customer-premises equipment among the target applications. The device’s high output-current drive and low-distortion architecture suit the transmit path, while the external transformer, filter, impedance-matching network, and protection network remain essential parts of the complete line interface.
How should the AD8018ARU be decoupled and laid out?
Place the manufacturer-recommended bypass capacitors as close as practical to the AD8018ARU supply and ground pins, using short, low-inductance traces. Keep the high-current output paths away from sensitive input and reference traces to reduce channel-to-channel coupling. The 14-lead TSSOP footprint should follow the Analog Devices package drawing, including land-pattern tolerances. Provide adequate ground-plane area and thermal copper because sustained line-drive current can create local heating.
Where can I buy AD8018ARU and check its price and lead time?
Use the Request a Quote form on this page to request AD8018ARU availability, current commercial terms, and lead time from XAIPART. The AD8018ARU is a cataloged Analog Devices part with a 14-lead TSSOP package, and its product page also links the AD8018ARU-EVAL board for design evaluation. Share the required quantity, reel or tube preference, and target date with the quote request so the order can be planned without relying on stale catalog pricing.
Is the AD8018ARU in stock?
Current stock should be confirmed through the Request a Quote form on this page because availability can vary by quantity and package format. The AD8018ARU is listed by major distributors, and the associated AD8018ARU-EVAL development board is also cataloged. For production planning, request the desired quantity, delivery date, and acceptable reel packaging in the quote request. Do not infer a guaranteed stock position from a product listing alone.
What are the key specifications of AD8018ARU that engineers should know?
The AD8018ARU is a 5 V, rail-to-rail, dual 2/0 xDSL line-drive amplifier in a 14-lead TSSOP package. Its defining characteristics are high output-current drive, low-distortion operation, and suitability for ADSL, SDSL, VDSL, USB, PCMCIA, and PCI equipment. The device is also associated with the AD8018ARU-EVAL evaluation board. Detailed gain, bandwidth, slew rate, current limits, and temperature ratings should be confirmed in the manufacturer data sheet.

داده‌های مرجع مهندسی برای AD8018ARU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the AD8018ARU for a 5 V single-supply xDSL transmitter requiring a dual 2/0 line driver, rail-to-rail output behavior, high output-current capability, and low distortion in a 14-lead TSSOP. It is particularly relevant to ADSL, SDSL, VDSL, USB, PCMCIA, and PCI customer-premises equipment. AD8018ARU-REEL and AD8018ARU-REEL7 are suitable when reel packaging or reel quantity is required, while the AD8018ARUZ forms can be considered only after checking the manufacturer ordering table for grade and environmental differences. For a cross-brand replacement, do not rely on package count alone; require a verified pin-for-pin match and compare output current, distortion, bandwidth, slew rate, supply range, enable logic, and thermal limits. If those requirements cannot be demonstrated, use the AD8018 family and validate the candidate with the AD8018ARU-EVAL board before committing it to a production PCB.

مقایسه با جایگزین‌ها

پارامتر این محصول AD8018ARU-REEL AD8018ARU-REEL7 AD8018ARUZ-REEL AD8018ARUZ
Package 14-lead TSSOP 14-lead TSSOP 14-lead TSSOP 14-lead TSSOP 14-lead TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Dual 2/0 xDSL line-drive amplifier Dual 2/0 xDSL line-drive amplifier Dual 2/0 xDSL line-drive amplifier Dual 2/0 xDSL line-drive amplifier Dual 2/0 xDSL line-drive amplifier
Supply Voltage 5 V 5 V 5 V 5 V 5 V
Output Architecture Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Key Drive Capability High output-current drive High output-current drive High output-current drive High output-current drive High output-current drive
Primary Performance Emphasis Low distortion Low distortion Low distortion Low distortion Low distortion
Target Applications ADSL, SDSL, VDSL, USB, PCMCIA, and PCI xDSL equipment ADSL, SDSL, VDSL, USB, PCMCIA, and PCI xDSL equipment ADSL, SDSL, VDSL, USB, PCMCIA, and PCI xDSL equipment ADSL, SDSL, VDSL, USB, PCMCIA, and PCI xDSL equipment ADSL, SDSL, VDSL, USB, PCMCIA, and PCI xDSL equipment
Ordering Form AD8018ARU Reel ordering variant Reel ordering variant Z-grade reel ordering variant Z-grade ordering variant

تفاوت‌های کلیدی

  • Application-specific xDSL output stage (در مقابلAD8018ARU-REEL)
  • Compact integration of two line-driver channels (در مقابلAD8018ARU-REEL7)
  • Direct AD8018 family interchangeability (در مقابلAD8018ARUZ-REEL)
  • Established evaluation path for line-interface development (در مقابلAD8018ARUZ)

یادداشت‌های طراحی

Place the required bypass capacitors immediately adjacent to the AD8018ARU supply and ground pins. Use short, low-inductance connections and a continuous ground reference beneath the device and nearby line-network components. Keep the high-current output paths away from the other channel and sensitive modulation circuitry. Because the package uses exposed leads and the driver can produce substantial dynamic current, inspect solder-joint integrity and provide adequate copper for both electrical performance and heat spreading.

Design the 5 V supply path for the transient current demanded by the xDSL output stage rather than only the nominal operating load. Check line-transformer and termination behavior across the intended signal bandwidth, and ensure the amplifier is not operating into a load that causes excessive output-current demand or distortion. Confirm the manufacturer’s minimum bypass capacitance and voltage derating requirements. A stable local supply reduces modulation of the transmitted signal and prevents false distortion measurements caused by supply ripple.

Do not substitute an xDSL driver solely because its package has the same pin count. Verify the exact 14-lead pinout, supply range, output-current capability, bandwidth, slew rate, distortion, shutdown or enable behavior, and output isolation. The AD8018ARU-REEL, AD8018ARU-REEL7, AD8018ARUZ-REEL, and AD8018ARUZ references are same-family ordering variants; confirm the exact ordering table for temperature grade, reel quantity, and packaging before releasing a BOM.

Estimated thermal requirement: calculate worst-case driver dissipation from the actual 5 V supply, output waveform, load, and duty cycle, then apply the manufacturer’s thermal-resistance data for the 14-lead TSSOP and the PCB copper available. The calculation should include the transformer and termination losses as separate circuit losses. Keep the TSSOP away from heat sources and maintain airflow where the enclosure permits. Verify the estimated junction temperature against the device’s rated limit before fixing the maximum operating ambient temperature.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available manufacturer and distributor excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. The AD8018ARU is an xDSL interface amplifier rather than an automotive-qualified device in the information available.

تاریخ تأیید داده‌ها: 2026-11-18 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

AD8018ARU datasheet AD8018ARU pinout AD8018ARU datasheet pdf AD8018ARU equivalent AD8018ARU replacement AD8018ARU cross reference AD8018ARU vs AD8018ARU-REEL AD8018ARU TSSOP-14 footprint AD8018ARU xDSL line driver AD8018ARU application circuit Analog Devices AD8018ARU AD8018ARU price AD8018ARU stock AD8018ARU schematic

قطعات و اصطلاحات مرتبط

Analog Devices AD8018ARU AD8018ARU-REEL AD8018ARU-REEL7 AD8018ARUZ AD8018ARUZ-REEL AD8018ARU-EVAL xDSL line-drive amplifier dual 2/0 driver rail-to-rail output high-output-current amplifier interface IC line interface amplifier ADSL SDSL VDSL USB modem PCMCIA PCI TSSOP-14 TSSOP package family surface-mount package low-distortion signal amplification 5 V single-supply circuit line transformer
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ