Analog Devices

AD9831AST - 10-Bit 25 MHz DDS | Analog Devices | Waveform Generation

MPN: AD9831AST ✓ فعال
+3 V to +5 V Vdss 48-LQFP, 7 mm x 7 mm Package 25 MHz Speed
حداقل سفارش: 1 |

AD9831AST نمای کلی

Analog Devices AD9831AST is a 10-bit direct digital synthesis waveform generator rated for operation up to 25 MHz and housed in a 48-LQFP package measuring 7 mm by 7 mm. The device combines a phase accumulator, sine look-up table, and 10-bit DAC on one CMOS IC, providing a programmable output with phase-modulation and frequency-modulation capabilities. Its 32-bit tuning word supports fine frequency control, while parallel control and data interfaces simplify integration with digital logic.

A direct digital synthesizer, or DDS, is a frequency-generation architecture that converts a numerical tuning value into a time-domain waveform through digital phase accumulation and lookup. The DDS belongs to the waveform-generator hierarchy within clock and timing integrated circuits. Compared with a conventional analog voltage-controlled oscillator, a DDS can provide precise digital frequency control, repeatable tuning, and programmable phase modulation while retaining a compact integrated implementation.

The AD9831AST provides a 10-bit DAC, a 10-bit phase accumulator, and a 32-bit frequency tuning word. According to the Analog Devices AD9831 product documentation, the device supports phase and frequency modulation. These features are useful when a system requires a digitally controlled sine source for excitation, calibration, signal generation, or test. The 25 MHz maximum operating specification identifies the upper performance class of this device, while the parallel interface permits direct connection to microcontroller or programmable-logic data buses.

The AD9831AST is built around a numerically controlled oscillator. Its phase accumulator advances by the selected frequency tuning value for every input-clock cycle, and the accumulated phase addresses the internal sine lookup table. The lookup result is converted by the 10-bit DAC into an analog waveform. This architecture separates digital frequency programming from the final analog output and makes repeatability easier to manage than with many analog tuning approaches.

Typical applications include low-frequency and intermediate-frequency signal generation, communications test equipment, frequency-synthesis modules, industrial instrumentation, and embedded waveform sources. The device is particularly suitable when a microcontroller or FPGA must calculate a frequency word and apply it over a parallel bus. Because DDS outputs contain high-order image components, a reconstruction or low-pass filter is normally used to remove unwanted spectral aliases at the analog output.

PCB design should provide a stable reference clock and follow the manufacturer's recommended bypass and layout practices. Decoupling capacitors should be placed close to their associated supply pins, while the analog output should be routed away from digital control signals. Filter selection should account for the desired output frequency and the DDS clock rate so that useful fundamental energy is retained while aliases and harmonics are attenuated.

This product page combines the manufacturer specifications, lifecycle information, source documentation, packaging details, and engineering guidance into a focused reference for evaluating the AD9831AST. It also identifies the confirmed same-footprint ordering option while clearly separating verified technical facts from parameters that require a datasheet review.

جایگزین‌های drop-in برای AD9831AST — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

AD9831ASTZ

✅ جایگزین مستقیم
📦 48-LQFP (7 mm x 7 mm)
Same 10-bit resolution, 25 MHz clock, 32-bit tuning word, and 48-LQFP footprint; ordering-code attributes differ by 0% in the listed key parameters.

📋 جایگزین مرجع (خارج از کاتالوگ)

AD9831AST مشخصات

Device Type Direct Digital Synthesis Waveform Generator
حداکثر فرکانس کلاک 25 MHz
DAC Resolution 10 bit
Frequency Tuning Word 32 bit
Phase Accumulator Resolution 10 bit
Output Waveform Sine wave
Frequency Modulation Supported
Phase Modulation Supported
Process Technology CMOS
بسته‌بندی 48-LQFP, 7 mm x 7 mm
تعداد پین‌ها 48 pins
نوع نصب Surface mount
Integrated DAC Count 1 DAC
Operating Supply +3 V to +5 V
وضعیت RoHS Lead-free

راهنمای پیکربندی پین AD9831AST 48-lqfp, 7 mm x 7 mm

پیکربندی پین برای AD9831AST (پکیج 48-lqfp, 7 mm x 7 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 48-lqfp, 7 mm x 7 mm برای AD9831AST

داده پین‌آوت تفصیلی موجود نیست برای AD9831AST.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD9831AST مناسب است برای 6 کاربردs: Communications Test-Signal Generation, Embedded Frequency-Synthesis Module, Industrial Instrumentation, Frequency-Modulated Signal Source, Precision Calibration Signal Generator, RF and IF Exciter Front End.

🌐

Communications Test-Signal Generation

The AD9831AST is suitable for generating calibrated sine-wave excitations in communications test equipment because its 10-bit DAC, 32-bit frequency tuning word, and 25 MHz maximum clock provide a compact programmable source. A controller can calculate and load a frequency word for each test point, while the phase- and frequency-modulation inputs add controlled modulation without another waveform source. The result is passed through a reconstruction filter before measurement. The principal design constraint is alias and harmonic control: filter cutoff, clock ratio, and allowed output amplitude must be selected together to preserve useful fundamental energy while limiting unwanted images.

🧩

Embedded Frequency-Synthesis Module

The AD9831AST can serve as the waveform-generating element of an embedded frequency-synthesis module controlled by a microcontroller or FPGA. Its 32-bit tuning word allows the digital controller to represent output frequency precisely, and the parallel interface supports direct bus updates for frequency or modulation changes. Because the device uses a 10-bit DAC and a phase accumulator, the output is repeatable and digitally programmable rather than dependent on analog component tolerances. The module should include a low-pass reconstruction filter and local bypass capacitance, with interface timing and signal levels checked against the manufacturer pin and timing tables.

🏭

Industrial Instrumentation

The AD9831AST fits industrial instrumentation that requires a repeatable adjustable excitation signal for transducers, measurement loops, or calibration fixtures. Its phase accumulator and sine look-up table permit a supervisory controller to change frequency through the 32-bit tuning word, while modulation inputs support controlled test conditions. The CMOS device operates from +3 V to +5 V according to the Analog Devices listing, making it suitable for compact multi-voltage instrumentation architectures. Designers should reserve filtering and output-conditioning stages and validate the analog output across the intended frequency band, especially where harmonic distortion or clock-related images affect instrument accuracy.

📻

Frequency-Modulated Signal Source

The AD9831AST is appropriate for a frequency-modulated signal source because the device natively supports frequency modulation in addition to phase modulation. A digital controller can establish the carrier frequency with the 32-bit tuning word and apply time-varying modulation through the dedicated modulation inputs. This architecture is useful for communications, waveform testing, and controlled excitation systems that require programmable modulation rather than a fixed-frequency oscillator. The implementation must keep modulation bandwidth, output-frequency range, and reference-clock stability in view; a reconstruction filter then removes unwanted spectral images while retaining the intended modulated fundamental.

🔧

Precision Calibration Signal Generator

The AD9831AST can generate repeatable calibration tones because a numerical frequency setting directly controls the DDS phase accumulator and 10-bit DAC. A test controller can request a specific output frequency by loading the corresponding 32-bit tuning word, reducing dependence on analog oscillator calibration. The device is useful in automated fixtures that sweep excitation frequency while maintaining a consistent waveform shape. Accuracy at the output depends on the reference clock, frequency-word rounding, DAC resolution, analog reconstruction filter, and measurement path, so those elements must be included in the calibration budget rather than attributing all system accuracy to the AD9831AST alone.

📡

RF and IF Exciter Front End

The AD9831AST is useful as an exciter or intermediate-frequency source in RF and communications equipment because it combines a 25 MHz maximum clock specification with programmable frequency and phase modulation. It can provide the reference tone or low-level excitation from which a larger RF chain derives the final carrier. The DDS output should be treated as an analog waveform requiring careful grounding, filtering, and gain control before mixer or amplifier stages. Engineers should calculate the permitted tuning-word range for the actual reference clock and verify phase continuity when changing frequency, particularly if the receiving or modulation subsystem expects low phase discontinuity.

خلاصه محصولات پیشنهادی

AD9831AST Analog Devices استفاده‌شده در: Communications Test-Signal Generation, Embedded Frequency-Synthesis Module, Industrial Instrumentation, Frequency-Modulated Signal Source, Precision Calibration Signal Generator, RF and IF Exciter Front End AD9831ASTZ Same-footprint ordering option استفاده‌شده در: Communications Test-Signal Generation, Embedded Frequency-Synthesis Module, Industrial Instrumentation, Frequency-Modulated Signal Source, Precision Calibration Signal Generator, RF and IF Exciter Front End
What is the AD9831AST used for?
The AD9831AST is a 10-bit direct digital synthesis waveform generator used to produce a programmable analog sine wave. According to the Analog Devices AD9831 product documentation, it combines a phase accumulator, sine look-up table, and 10-bit DAC on one CMOS chip, with a maximum clock frequency of 25 MHz. It is suitable for digital frequency synthesis, modulation, calibration, and test-signal generation.
What are the key specifications of AD9831AST that engineers should know?
The AD9831AST is a 25 MHz, 10-bit DDS with a 32-bit frequency tuning word and one integrated DAC. The device supports both frequency modulation and phase modulation and uses a 48-LQFP package measuring 7 mm by 7 mm. According to the Analog Devices AD9831 product page and datasheet, these characteristics support precise digitally controlled waveform generation with parallel interface access.
What is the operating voltage of AD9831AST?
The AD9831AST operates from +3 V to +5 V. The Analog Devices AD9831 product documentation identifies the device as a CMOS direct digital synthesizer with one 10-bit DAC, a 32-bit tuning word, frequency modulation, and phase modulation. Supply-decoupling layout should follow the pin-description table and recommended application circuit in the manufacturer datasheet.
What is the difference between AD9831AST and AD9831ASTZ?
AD9831AST and AD9831ASTZ both use the 48-LQFP package and are listed as 10-bit, 25 MHz direct digital synthesis ICs. The retrieved listings do not expose a complete ordering-code comparison, so temperature grade, lead-free status, and qualification differences must be checked against the Analog Devices ordering guide before substitution. AD9831ASTZ is the confirmed same-footprint ordering alternative.
When should I choose AD9831AST over AD9831ASTZ?
Choose AD9831AST when its complete ordering-code attributes match the required production specification and supply plan. Choose AD9831ASTZ when the board footprint remains unchanged and its ordering attributes better satisfy the procurement or qualification requirement. The retrieved information confirms the same 48-LQFP footprint, but it does not expose enough ordering details for an unconditional choice based on temperature or lifecycle alone.
Is AD9831AST suitable for a microcontroller-based waveform generator?
Yes, the AD9831AST is suitable for a microcontroller-based waveform generator when the controller writes a frequency tuning word and uses the parallel control interface. Its 32-bit tuning word provides fine digital frequency control, while phase and frequency modulation support programmable waveform behavior. The Analog Devices AD9831 documentation identifies these functions as core device capabilities.
What can replace AD9831AST?
AD9831ASTZ is the confirmed drop-in ordering candidate for AD9831AST because both are listed in the same 48-LQFP package with 10-bit resolution and 25 MHz operation. Before replacing the component, verify the complete ordering table, temperature grade, supply requirements, pin functions, and lifecycle conditions. No qualified cross-brand drop-in replacement was confirmed.
Where to download the AD9831AST datasheet PDF?
Download the AD9831AST documentation from the official Analog Devices AD9831 product page at https://www.analog.com/en/products/ad9831.html. The page provides the manufacturer data sheet and product resources, including the numerical synthesis and reconstruction-filter guidance referenced by Analog Devices ADIsimDDS. Use the manufacturer's revision associated with the current AD9831 documentation.
Where can I find the AD9831AST pinout?
The AD9831AST pinout and numbered pin descriptions should be taken from the Analog Devices AD9831 manufacturer datasheet. The device uses a 48-LQFP package, and its interface, control, ground, supply, and analog-output connections must be assigned from the official pin-description table. Do not infer the pin map from a generic LQFP drawing or an unverified distributor image.
How do I calculate the frequency word for AD9831AST?
The AD9831AST frequency word is calculated as the desired output frequency divided by the system clock frequency, multiplied by 2^32 for a 32-bit tuning word. The Analog Devices ADIsimDDS tool calculates the required FTW for a selected reference clock and desired output frequency. The final value is written through the device's parallel control interface.
Does AD9831AST need an output reconstruction filter?
A reconstruction filter is normally required to remove unwanted DDS images and harmonics from the analog output. The Analog Devices AD9831 resources specifically reference external reconstruction filters and provide ADIsimDDS modeling assistance. Filter the output according to the desired bandwidth while preserving the required fundamental, and account for the reference-clock rate when defining the passband.
What is the AD9831AST maximum clock frequency?
The AD9831AST maximum clock frequency is 25 MHz. The Analog Devices AD9831 product page and distributor technical listings identify the device as a 10-bit DDS operating to 25 MHz with a 32-bit tuning word. The reference clock and maximum tuning word jointly determine the highest directly representable output frequency.
Where can I buy AD9831AST and check its current lead time?
Use the Request a Quote form on this page to ask for AD9831AST availability, current lead time, and order quantities. The form allows the exact AD9831AST MPN and required packaging details to be reviewed without embedding a price figure that may change. Confirm the manufacturing status and delivery schedule when the quote is returned.
Is AD9831AST currently in active production?
The Analog Devices AD9831 product page states “AD9831 PRODUCTION,” indicating that the AD9831 family remains in production. Some distributor indexes also label the exact ordering code differently, so the specific AD9831AST suffix should be reconfirmed when placing an order. The manufacturer product page is the appropriate lifecycle reference for current sourcing decisions.
What is the best cross-brand equivalent for AD9831AST?
No cross-brand drop-in equivalent was confirmed for the AD9831AST. A defensible replacement must use the same 48-LQFP footprint, preserve pin assignments, and match the 10-bit DAC, 25 MHz clock, modulation functions, and parallel interface. The retrieved cross-reference results provide search tools rather than a qualified candidate, so a redesign-level comparison is required instead of assuming interchangeability.

داده‌های مرجع مهندسی برای AD9831AST — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose AD9831AST when the application needs a 10-bit DDS with a 25 MHz maximum clock, 32-bit frequency tuning word, frequency modulation, and phase modulation in a 48-LQFP package. AD9831ASTZ is the closest confirmed drop-in ordering option because the retrieved specifications match the target in package, resolution, clock rate, and tuning-word width; confirm temperature grade and qualification requirements before choosing between them. No cross-brand substitute should be selected solely from a generic similarity result because a valid drop-in must preserve all 48 pin assignments, parallel interface behavior, modulation functions, supply requirements, and clock characteristics. If the AD9831AST is unavailable, use AD9831ASTZ only after confirming its ordering attributes. If no exactly compatible part can be validated, plan a board-level redesign rather than assuming that another DDS with similar headline specifications can replace it.

مقایسه با جایگزین‌ها

پارامتر این محصول AD9831ASTZ
Brand Analog Devices Analog Devices
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Device Type Direct Digital Synthesis Waveform Generator Direct Digital Synthesis IC
Maximum Clock Frequency 25 MHz 25 MHz
DAC Resolution 10 bit 10 bit
Frequency Tuning Word 32 bit 32 bit
Integrated DAC Count 1 DAC 1 DAC
Supply Voltage +3 V to +5 V +3 V to +5 V

تفاوت‌های کلیدی

  • Confirmed same-footprint ordering option (در مقابلAD9831ASTZ)
  • Integrated programmable modulation capability (در مقابلAD9831ASTZ)
  • Direct numerical frequency control (در مقابلAD9831ASTZ)

یادداشت‌های طراحی

Place the input and output bypass capacitors close to the corresponding AD9831AST pins, and route the analog output away from the parallel data and control bus. Keep the ground plane continuous under the device and return analog-output current through a low-impedance path. The Analog Devices AD9831 application information should be used to identify the required capacitor values and the exact supply and ground pins before layout is released.

Use a reconstruction filter between the AD9831AST output and the next analog stage. Select its cutoff from the intended output band and the actual reference-clock frequency so that the desired fundamental is retained while DDS images are attenuated. Check amplitude, phase, and distortion after filtering because a 10-bit DAC, finite reconstruction bandwidth, and board parasitics all contribute to the final analog performance.

Do not calculate a frequency word using an assumed clock value. Measure or specify the actual reference-clock frequency, then apply the AD9831 tuning-word relationship and confirm that the requested output does not exceed the device's representable range. Also verify the ordering-code temperature grade before production because the retrieved AD9831AST and AD9831ASTZ descriptions do not provide a complete side-by-side ordering table.

Separate clock, digital-control, and analog-output routing where practical. Keep the DDS reference-clock path short, provide a low-impedance return for the clock source, and avoid routing high-speed parallel signals beneath the analog output node. A quiet clock reduces phase noise and frequency instability, while controlled return paths help prevent switching activity from coupling into the reconstructed output.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Yes
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The Microchip Price listing identifies AD9831AST as lead-free. No explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

AD9831AST datasheet AD9831AST pinout AD9831AST datasheet pdf Analog Devices AD9831AST AD9831AST 10-bit DDS AD9831AST 25 MHz AD9831AST 48-LQFP AD9831AST frequency word calculator AD9831AST equivalent AD9831AST replacement AD9831AST vs AD9831ASTZ AD9831AST price AD9831AST stock AD9831AST waveform generator application

قطعات و اصطلاحات مرتبط

Analog Devices AD9831AST AD9831ASTZ AD9831 Direct Digital Synthesizer DDS Waveform Generator Numerically Controlled Oscillator Phase Accumulator Sine Look-Up Table 10-bit DAC 32-bit Frequency Tuning Word Frequency Modulation Phase Modulation CMOS 48-LQFP LQFP Surface Mount Reconstruction Filter ADIsimDDS Communications Test Equipment Industrial Instrumentation Frequency Synthesis Analog Output Lead-Free
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ