Analog Devices

ADF4153BCPZ-RL7 - 4 GHz Fractional-N RF Synthesizer | ADI

MPN: ADF4153BCPZ-RL7 ✓ فعال
2.7 V to 3.3 V Vdss Two selectable settings Id 20-VFQFN exposed-pad CSP, 3.75 mm × 4 mm Package 4 GHz Speed
حداقل سفارش: 1 |

ADF4153BCPZ-RL7 نمای کلی

The Analog Devices ADF4153BCPZ-RL7 is a 4 GHz fractional-N frequency synthesizer with one RF output, a three-wire serial interface, and a 20-VFQFN exposed-pad CSP package. It operates from a 2.7 V to 3.3 V supply and supports an external reference source over a -40 °C to +85 °C temperature range.

A fractional-N frequency synthesizer belongs to the PLL-based clock and timing IC category. It locks an output oscillator to a stable reference frequency while allowing fractional division ratios between integer settings. This architecture combines integer-N frequency synthesis with a Sigma-Delta fractional interpolator, enabling fine frequency resolution without requiring an exceptionally high reference frequency. The ADF4153 family integrates these functions with low-noise digital phase-frequency detection, a precision charge pump, programmable reference division, and a programmable feedback divider.

Key features include operation up to 4 GHz, fractional-N synthesis, a digital lock indicator, selectable charge-pump currents, and a three-wire digital interface. The wide synthesis range supports RF local-oscillator generation for communications equipment, while fractional division permits narrow channel spacing and precise tuning. A low-noise phase-frequency detector and precision charge pump help establish low phase noise and accurate lock performance in demanding RF signal chains.

The Sigma-Delta fractional interpolator generates fractional divider values while its digital section controls the reference and feedback paths. Programmable charge-pump current allows loop bandwidth and phase-error performance to be tuned according to reference frequency, channel spacing, and filter requirements. Designers should use the manufacturer’s loop-filter design guidance rather than treating the fractional-N architecture as a universal fixed filter, because loop dynamics and reference spurs depend strongly on the selected divider ratios.

Typical uses include wireless transmitter and receiver local oscillators, microwave downconversion, upconversion, frequency-agile test equipment, and closed-loop RF signal-generation systems. The device is also appropriate for instrumentation requiring precise local-oscillator tuning, phase-locked signal references, or an output locked to an external frequency standard.

A critical design consideration is the exposed thermal pad beneath the 20-VFQFN package. Place the pad over a continuous ground-plane area and follow the datasheet’s land-pattern and thermal-via recommendations. The power, reference, and RF paths also require careful grounding and isolation so reference-divider noise, supply coupling, and unintended feedback do not degrade phase noise or spur performance.

This product page combines the manufacturer’s architectural information, package and interface details, sourcing context, parameter comparisons, and practical implementation guidance. It is intended to help engineers evaluate the ADF4153BCPZ-RL7, identify temperature-grade or related-family alternatives, and plan a robust fractional-N PLL layout before committing the design to production.

جایگزین‌های drop-in برای ADF4153BCPZ-RL7 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ADF4153BCPZ-RL7 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Device Type, Maximum Synthesizer Frequency, Phase Detector.

Analog Devices
Package: 20-lead VFQFN with exposed pad
Device Type: Fractional-N frequency synthesizer
Maximum Synthesizer Frequency: 4 GHz
مقایسه با ADF4153BCPZ-RL7 →
Analog Devices
Package: 20-WFQFN exposed-pad chip-scale package
Device Type: Fractional-N frequency synthesizer (RF) IC
مقایسه با ADF4153BCPZ-RL7 →
Analog Devices
Package: LFCSP-20 (20-lead WFQFN with exposed pad, CSP)
Device Type: Fractional-N frequency synthesizer (PLL)
Maximum Synthesizer Frequency: 6.2 GHz
مقایسه با ADF4153BCPZ-RL7 →

ADF4153YCPZ-RL7

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 20-VFQFN exposed-pad CSP
Fractional-N frequency synthesizer · Sigma-delta fractional-N · 1 channel · 4 GHz · 10 MHz to 4 GHz · Low-noise digital PFD · Precision charge pump · Programmable

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADF4153ZCPZ-RL7

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-VFQFN exposed-pad CSP
Same 4 GHz synthesis class and 20-VFQFN footprint; the Z-grade temperature range extends above the target grade, while the rated RF ceiling differs by 0% at 4 GHz.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADF4153BCPZ-RL

✅ جایگزین مستقیم
📦 20-VFQFN exposed-pad CSP
Same 4 GHz synthesis class and 20-VFQFN footprint; RF ceiling differs by 0%, with the order-code suffix determining the exact packing configuration.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADF4154BCPZ-RL7

✅ جایگزین مستقیم
Analog Devices
📦 20-VFQFN exposed-pad CSP
Fractional-N frequency synthesizer (RF) IC · 4 GHz · 200 MHz · 2.7 V to 3.3 V · 4/5 and 8/9 · 2 selectable settings · 3-wire serial interface · CMOS

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADF4154YCPZ-RL7

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-VFQFN exposed-pad CSP
Same 20-VFQFN footprint and closely related fractional-N PLL architecture; the Y-grade temperature coverage differs from the target grade while 4 GHz remains the common RF comparison point.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADF4154ZCPZ-RL7

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-VFQFN exposed-pad CSP
Same 20-VFQFN footprint and closely related fractional-N PLL architecture; the Z-grade temperature coverage differs from the target grade while 4 GHz remains the common RF comparison point.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADF4153BCPZ-RL7 مشخصات

Product Type Fractional-N frequency synthesizer
Maximum RF Output Frequency 4 GHz
RF Output Count 1
Supply Voltage Range 2.7 V to 3.3 V
محدوده دمای کاری -40 °C to +85 °C
Digital Interface Three-wire external interface
Reference Clock External
Frequency Synthesis Architecture Fractional-N
Fractional Interpolator Sigma-Delta based
Phase Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
Reference Divider Programmable
بسته‌بندی 20-VFQFN exposed-pad CSP, 3.75 mm × 4 mm
تعداد پایه 20 pins
وضعیت RoHS Compliant
وضعیت چرخه عمر Production
Lock Detect Digital lock detect
Charge-Pump Current Two selectable settings

راهنمای پیکربندی پین ADF4153BCPZ-RL7 20-vfqfn exposed-pad csp, 3.75 mm × 4 mm

پیکربندی پین برای ADF4153BCPZ-RL7 (پکیج 20-vfqfn exposed-pad csp, 3.75 mm × 4 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 20-vfqfn exposed-pad csp, 3.75 mm × 4 mm برای ADF4153BCPZ-RL7

داده پین‌آوت تفصیلی موجود نیست برای ADF4153BCPZ-RL7.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADF4153BCPZ-RL7 مناسب است برای 6 کاربردs: Wireless Transmitter Local Oscillator, Wireless Receiver Downconversion, RF Upconversion Signal Source, Frequency-Able Test Instrumentation, Frequency-Locked Reference System, Industrial RF Control Module.

🌐

Wireless Transmitter Local Oscillator

The ADF4153BCPZ-RL7 fits a wireless transmitter local-oscillator role because it synthesizes programmable RF frequencies up to 4 GHz with fractional-N resolution. The low-noise digital phase-frequency detector, precision charge pump, and programmable reference divider support phase-locked generation for upconversion paths. Its Sigma-Delta interpolator permits fine channel spacing without changing to a much higher reference frequency. Designers should tune the loop bandwidth and charge-pump setting for the required channel spacing, reference phase noise, and spur limit, then verify isolation between the RF output, reference network, and supply return paths.

🌐

Wireless Receiver Downconversion

In a wireless receiver, the ADF4153BCPZ-RL7 can generate the local oscillator used to translate an incoming RF signal to a lower intermediate frequency. Its 4 GHz upper frequency supports RF-front-end downconversion, while fractional-N operation permits channel-by-channel tuning around a common reference. The architecture is useful when multiple channels or calibration offsets must be covered without separate oscillators. Performance depends on reference stability, loop-filter design, charge-pump selection, and control of spur energy, so prototype measurements should include both phase-noise and in-band spur requirements.

📻

RF Upconversion Signal Source

The ADF4153BCPZ-RL7 can serve as the phase-locked RF source in an upconversion or frequency-translation system. A single low-noise reference establishes stability while the fractional-N divider permits precise selection of the intermediate or carrier frequency. This arrangement is useful for coherent test and measurement equipment where multiple RF outputs must remain frequency-locked. The synthesizer output should be isolated from high-gain stages and sensitive mixers, and its phase-noise performance must be considered alongside the downstream chain’s noise figure and conversion loss.

🧰

Frequency-Able Test Instrumentation

The ADF4153BCPZ-RL7 is appropriate for frequency-agnostic laboratory instruments that need an accurate, programmable RF source. Its 4 GHz range and fractional-N resolution support swept or stepped measurements near communication bands, while synchronization to an external reference provides repeatability across instruments. For production test systems, designers can program different divider settings through the three-wire interface and verify lock digitally. Channel density and settling time depend on the loop bandwidth and reference configuration, so the timing budget should be evaluated with the complete measurement sequence rather than a single nominal lock estimate.

🛰️

Frequency-Locked Reference System

The ADF4153BCPZ-RL7 can produce an RF reference locked to a stable external oscillator for phased-array, synchronization, or signal-conditioning systems. The programmable reference divider and feedback path allow the output frequency to be derived from the system reference, reducing dependence on multiple independent oscillators. For coherent systems, phase noise, reference spur coupling, and feedback isolation are more important than tuning convenience. A clean reference distribution network, grounded exposed pad, and separate sensitive return paths help prevent the synthesizer from injecting phase noise into adjacent channels.

🏭

Industrial RF Control Module

The ADF4153BCPZ-RL7 can serve as the programmable RF source in an industrial control module that must synthesize a coherent carrier over -40 °C to +85 °C. The 2.7 V to 3.3 V supply range supports integration with low-voltage embedded systems, and the three-wire interface simplifies connection to a controller. Because the exposed-pad package transfers heat into the board, industrial enclosure designs should provide uninterrupted ground copper and consider thermal vias under the pad. Firmware must also include lock-status handling so downstream RF stages are enabled only after the synthesizer reaches a valid locked state.

خلاصه محصولات پیشنهادی

ADF4153BCPZ-RL Closely related 4 GHz fractional-N synthesizer استفاده‌شده در: Wireless Transmitter Local Oscillator, Wireless Receiver Downconversion, Frequency-Locked Reference System ADF4154BCPZ-RL7 Analog Devices استفاده‌شده در: Wireless Transmitter Local Oscillator, RF Upconversion Signal Source, Frequency-Locked Reference System ADF4153YCPZ-RL7 Analog Devices استفاده‌شده در: Wireless Receiver Downconversion, Industrial RF Control Module ADF4154YCPZ-RL7 Temperature-graded related family member استفاده‌شده در: RF Upconversion Signal Source, Industrial RF Control Module ADF4153ZCPZ-RL7 Related family member for extended-temperature instrumentation استفاده‌شده در: Frequency-Able Test Instrumentation ADF4154ZCPZ-RL7 Related PLL option for a revised test-source platform استفاده‌شده در: Frequency-Able Test Instrumentation
What is the ADF4153BCPZ-RL7?
The ADF4153BCPZ-RL7 is a 4 GHz, single-output fractional-N RF frequency synthesizer from Analog Devices. According to the manufacturer product page, it combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and a Sigma-Delta fractional interpolator. The device uses a 2.7 V to 3.3 V supply, a three-wire digital interface, and a 20-VFQFN exposed-pad CSP package.
What frequency range does ADF4153BCPZ-RL7 support?
The ADF4153BCPZ-RL7 supports RF synthesis up to 4 GHz and provides one RF output. Its fractional-N architecture permits fine tuning between integer divider ratios through a Sigma-Delta fractional interpolator. According to Analog Devices, the family is intended for local oscillators in wireless receiver and transmitter upconversion and downconversion sections, making it suitable for communications equipment operating within the device’s supported RF band.
What supply voltage and operating temperature does ADF4153BCPZ-RL7 use?
The ADF4153BCPZ-RL7 operates from 2.7 V to 3.3 V and is specified over -40 °C to +85 °C. The listed supply range is suitable for low-voltage RF and mixed-signal systems where a 3.3 V rail is already present. Designers should maintain the datasheet’s recommended supply decoupling and ensure that the exposed pad has a low-impedance connection to the ground plane.
Where can I download the ADF4153BCPZ-RL7 datasheet PDF?
The official ADF4153BCPZ-RL7 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/adf4153.pdf. The manufacturer product page at https://www.analog.com/en/products/adf4153.html links to the data sheet, selection table, software, evaluation hardware, and reference designs. Use the manufacturer document for final pin assignments, electrical limits, register definitions, and land-pattern instructions.
Where can I find the ADF4153BCPZ-RL7 pinout?
The ADF4153BCPZ-RL7 pinout is documented in the pin-description table and package drawing in the official ADF4153 manufacturer datasheet. The component uses a 20-VFQFN exposed-pad CSP package with an exposed thermal pad on the underside. Use the datasheet pin table when assigning tracks and when connecting the ground pad, because exposed-pad numbering and thermal requirements must be implemented exactly.
What is the difference between fractional-N and integer-N frequency synthesis?
Fractional-N synthesis adds a Sigma-Delta fractional interpolator to the integer-N PLL architecture, allowing the effective feedback division ratio to include a fractional value. The ADF4153BCPZ-RL7 uses this technique to obtain finer frequency spacing than integer divider selections alone. The practical benefit is improved channel resolution, although loop-filter design, reference quality, and fractional spur behavior remain central engineering considerations.
How do I design the loop filter for ADF4153BCPZ-RL7?
Design the loop filter from the selected reference frequency, PFD frequency, feedback divider, charge-pump current, target loop bandwidth, and permitted phase-noise or spur performance. According to the Analog Devices product resources, the family supports programmable reference division and two selectable charge-pump currents. Those settings provide the variables needed to calculate component values and assess loop dynamics rather than applying one universal filter network.
Does the ADF4153BCPZ-RL7 require special PCB grounding?
Yes, the ADF4153BCPZ-RL7 requires careful thermal-pad and ground-plane implementation. The 20-VFQFN exposed pad should be connected to ground and thermal vias placed according to the manufacturer land pattern. Keep the reference divider, PFD, charge-pump, and sensitive RF nodes away from switching-node and digital-return currents. This isolation helps preserve phase-noise and spur performance during lock.
What can replace the ADF4153BCPZ-RL7?
The closest documented replacements are temperature-grade and closely related family members that use the same 20-VFQFN footprint and remain in the 4 GHz class. Suitable candidates include ADF4153YCPZ-RL7, ADF4153ZCPZ-RL7, ADF4154BCPZ-RL7, ADF4154YCPZ-RL7, and ADF4154ZCPZ-RL7, subject to temperature, reference-divider, and register-function checks. A mechanical footprint match alone does not guarantee identical register behavior.
Is ADF4153BCPZ-RL7 the same as ADF4153BCPZ-RL?
The ADF4153BCPZ-RL7 and ADF4153BCPZ-RL are closely related 4 GHz fractional-N synthesizer order codes, but the trailing order code can encode the reel or qualification configuration. Engineers should compare the complete ordering information in the Analog Devices product-selection table before treating them as interchangeable. Confirm temperature grade, automotive qualification, packing format, and any ordering-code-specific differences.
ADF4153BCPZ-RL7 vs ADF4154BCPZ-RL7 — which is better for RF synthesis?
Choose the ADF4153BCPZ-RL7 when a proven 4 GHz fractional-N design and its associated register set are the priority. Consider the ADF4154BCPZ-RL7 when the project can use the related ADF4154 feature set and has been validated against that device’s complete datasheet. Both appear in the same LFCSP-based product family, but maximum frequency, register mapping, and application suitability must be compared before substitution.
When should I choose ADF4153BCPZ-RL7 over a related-family alternative?
Choose the ADF4153BCPZ-RL7 when the design is already qualified around its 4 GHz RF range, 2.7 V to 3.3 V supply, three-wire control interface, and established register programming. Related temperature-grade variants may be preferable when a wider temperature range is required, while ADF4154 options may suit designs using that family’s updated capabilities. Select only after checking frequency, loop-filter, register, and qualification differences.
Is ADF4153BCPZ-RL7 suitable for wireless transmitter and receiver local oscillators?
Yes, the ADF4153BCPZ-RL7 is specifically positioned for local-oscillator generation in wireless receiver and transmitter upconversion and downconversion sections. Its 4 GHz ceiling, fractional-N tuning, programmable reference divider, low-noise phase-frequency detector, and precision charge pump support phase-locked RF generation. Suitability still depends on the required channel spacing, reference quality, loop bandwidth, output power integration, and regulatory constraints.
Where can I buy ADF4153BCPZ-RL7 and check its lead time?
Use the Request a Quote form on this page to ask about ADF4153BCPZ-RL7 availability, current lead time, minimum order quantity, and delivery options. The manufacturer lists the ADF4153 family in production, but production status does not by itself establish stock for every orderable package suffix. Submit the exact MPN, target quantity, and delivery location so the quote reflects the correct reel and qualification configuration.
What are the key specifications of ADF4153BCPZ-RL7 that engineers should know?
The ADF4153BCPZ-RL7 is a 4 GHz, one-output fractional-N RF synthesizer operating from 2.7 V to 3.3 V over -40 °C to +85 °C. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and Sigma-Delta fractional interpolator. Control is through a three-wire interface, and the device is packaged in a 20-VFQFN exposed-pad CSP measuring 3.75 mm by 4 mm.

داده‌های مرجع مهندسی برای ADF4153BCPZ-RL7 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ADF4153BCPZ-RL7 when a new or existing design targets the established 4 GHz ADF4153 fractional-N architecture, a 2.7 V to 3.3 V supply, and a three-wire control interface. It is particularly suitable for wireless local oscillators, receiver downconversion, and phase-locked RF test equipment when the commercial -40 °C to +85 °C grade is sufficient. Choose ADF4153YCPZ-RL7 or ADF4153ZCPZ-RL7 when a wider temperature range is required but the same ADF4153 programming model is desired. Consider ADF4154BCPZ-RL7, ADF4154YCPZ-RL7, or ADF4154ZCPZ-RL7 only when the ADF4154 feature set, maximum RF frequency, and register map are preferable. A shared 20-VFQFN footprint simplifies mechanical reuse, but it does not remove the need to verify register behavior, loop-filter calculations, electrical limits, temperature grade, and qualification before substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول ADF4153YCPZ-RL7 ADF4153ZCPZ-RL7 ADF4153BCPZ-RL ADF4154BCPZ-RL7 ADF4154YCPZ-RL7
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 20-VFQFN exposed-pad CSP, 3.75 mm × 4 mm 20-VFQFN exposed-pad CSP 20-VFQFN exposed-pad CSP 20-VFQFN exposed-pad CSP 20-VFQFN exposed-pad CSP 20-VFQFN exposed-pad CSP
Product Type Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer
Digital Interface Three-wire external interface Three-wire external interface Three-wire external interface Three-wire external interface Three-wire external interface Three-wire external interface
RF Output Count 1 1 1 1 1 1
Fractional Interpolator Sigma-Delta based Sigma-Delta based Sigma-Delta based Sigma-Delta based Sigma-Delta based Sigma-Delta based

تفاوت‌های کلیدی

  • Single-output fractional-N synthesis reaches a 4 GHz ceiling (در مقابلADF4154BCPZ-RL7)
  • Commercial-grade operating range is explicitly specified (در مقابلADF4153YCPZ-RL7)
  • Sigma-Delta fractional interpolation enables fine divider resolution (در مقابلADF4153BCPZ-RL)
  • Three-wire control and exposed-pad integration (در مقابلADF4154YCPZ-RL7)

یادداشت‌های طراحی

Use the manufacturer land pattern and place the exposed thermal pad over uninterrupted ground copper. Add thermal vias according to the package drawing rather than relying on a via-free connection. Keep the RF output path away from the reference-divider and PFD returns. A continuous ground reference beneath the device improves return-path control, while sensitive supply and reference connections should use separate paths to digital and switching loads.

Follow the datasheet recommendations for analog and digital supply decoupling, including short capacitor connections to the relevant pins. The ADF4153BCPZ-RL7 operates from 2.7 V to 3.3 V, so verify the complete board supply remains inside that range during startup and load transitions. Place the regulator close to the synthesizer when it is not on the same board, and include the required bulk capacitance so reference and PFD currents do not disturb the supply rail.

Separate the reference-divider network from the RF output and high-current return paths. Route the PFD and charge-pump connections using short traces, and connect loop-filter components close to their associated pins. If the application contains a switching converter or digital processor, constrain their fast edges away from the reference input and feedback-divider area. This layout discipline reduces spur conversion and prevents supply or digital noise from appearing as phase noise.

Do not substitute a related family member solely because its package matches. The ADF4154 family introduces device-specific register and RF-range differences, while Y- and Z-grade ordering codes can change the operating-temperature requirement. Before replacement, compare the complete ordering table, maximum RF frequency, reference-divider range, register map, loop-filter equations, temperature grade, and qualification status. Re-run lock, phase-noise, spur, and settling measurements after any substitution.

Choose the PFD frequency, charge-pump current, and loop filter together rather than optimizing them independently. The programmable reference divider changes the PFD frequency for a given input reference, which can materially alter loop dynamics and spur performance. Evaluate both phase noise and reference spurs across the intended tuning range. Use the digital lock-detect signal for system sequencing, but also allow sufficient acquisition time before treating the RF output as usable.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS compliance is listed for the exact ADF4153BCPZ-RL7 order code. The automotive model named in the family datasheet is a distinct ordering code, so automotive qualification must not be inferred for this commercial part.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADF4153BCPZ-RL7 datasheet ADF4153BCPZ-RL7 pinout ADF4153BCPZ-RL7 datasheet pdf ADF4153BCPZ-RL7 equivalent ADF4153BCPZ-RL7 replacement ADF4153BCPZ-RL7 schematic ADF4153BCPZ-RL7 footprint ADF4153BCPZ-RL7 price ADF4153BCPZ-RL7 stock Analog Devices ADF4153BCPZ-RL7 ADF4153BCPZ-RL7 vs ADF4154BCPZ-RL7 ADF4153BCPZ-RL7 4 GHz synthesizer ADF4153BCPZ-RL7 VQFN-20 pinout ADF4153BCPZ-RL7 wireless local oscillator

قطعات و اصطلاحات مرتبط

Analog Devices ADF4153BCPZ-RL7 ADF4153YCPZ-RL7 ADF4153ZCPZ-RL7 ADF4153BCPZ-RL ADF4154BCPZ-RL7 ADF4154YCPZ-RL7 ADF4154ZCPZ-RL7 fractional-N frequency synthesizer frequency synthesizer phase-locked loop PLL clock and timing IC Sigma-Delta fractional interpolator phase-frequency detector PFD precision charge pump programmable reference divider feedback divider digital lock detect 20-VFQFN QFN family surface-mount package RF local oscillator wireless receiver wireless transmitter RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ