Texas Instruments

ADS826E-BB - 10-Bit 60MHz ADC | Texas Instruments

MPN: ADS826E-BB ✓ فعال
4.75 V to 5.25 V Vdss 28-pin SSOP Package 60 MHz Speed
حداقل سفارش: 1 |

ADS826E-BB نمای کلی

Texas Instruments ADS826E-BB is a 10-bit, single-input pipelined analog-to-digital converter with a 60 MHz maximum sampling frequency, 0.25 LSB nonlinearity, and a 28-pin SSOP package. It operates from a 4.75 V to 5.25 V supply across the -40°C to +85°C temperature range. The ADS826E-BB is designed for high-speed data acquisition, signal measurement, communications, and industrial control systems requiring compact 10-bit conversion performance.

An ADC is a data-acquisition integrated circuit that converts an analog voltage into a digital code for processing by a microcontroller, DSP, FPGA, or other digital logic. The pipelined ADC architecture belongs to the broader semiconductor hierarchy of data-converter ICs, analog-to-digital converters, and signal-chain semiconductors. By sampling at up to 60 MHz, this converter supports rapidly changing waveforms while retaining the simplicity of a 10-bit output interface.

Key characteristics include 10-bit resolution, one analog input, 60 MHz sampling, 0.25 LSB nonlinearity, and operation from 4.75 V to 5.25 V. The single-ended input arrangement simplifies connection to sensors, signal-conditioning circuits, and external analog front ends. Its 28-pin SSOP package provides a compact surface-mount option for equipment where PCB area is constrained but conversion throughput remains important.

The pipelined architecture separates the conversion process into multiple internal stages. This approach supports high sampling rates, although overall system accuracy still depends on the reference voltage, analog input drive, clock quality, grounding, output-data interpretation, and input bandwidth. The 10-bit resolution produces 1,024 digital codes, making the device appropriate for measurement and control systems that do not require the resolution of a 12-bit or 16-bit converter.

Typical applications include industrial process monitoring, communications receivers, waveform capture, instrumentation, embedded data acquisition, and control-loop signal sampling. It is particularly useful when 60 MHz throughput and 10-bit resolution provide a better balance than a slower high-resolution converter. In a complete acquisition chain, the ADS826E-BB follows an amplifier or sensor interface and precedes a digital controller that captures and processes the conversion codes.

A critical design consideration is the analog reference and input implementation. Use the manufacturer's pin-description table and recommended application circuit when assigning PCB tracks, decoupling capacitors, and signal-conditioning components. Keep the analog input path short, provide a stable reference and clock, and follow the layout guidance for a high-speed pipelined converter to minimize sampling error and digital coupling.

This product page combines the exact ADS826E-BB ordering information with the converter's principal electrical characteristics, pin-compatible family alternatives, and practical PCB and signal-integrity guidance. It also provides application-focused guidance for designers evaluating whether the 10-bit, 60 MHz ADS826E-BB fits a specific data-acquisition, communications, or industrial-control design.

جایگزین‌های drop-in برای ADS826E-BB — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ADS826E-BB (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Architecture, Input Type, Resolution, Mounting Type.

Texas Instruments
Package: 28-SSOP (5.30 mm)
Input Type: Single-Ended / Differential
مقایسه با ADS826E-BB →
Texas Instruments
Architecture: Pipelined ADC
Mounting Type: Surface mount gull-wing
مقایسه با ADS826E-BB →
Texas Instruments
Package: 28-pin SSOP
Architecture: Pipelined
Resolution: 10 bit
مقایسه با ADS826E-BB →
Texas Instruments
Package: 28-SSOP
Architecture: Pipelined ADC
Input Type: Single-ended or differential
مقایسه با ADS826E-BB →
Texas Instruments
Package: 64-pin VQFN (RGC), 9 mm x 9 mm
Architecture: SAR (Successive Approximation Register)
Input Type: Pseudo-bipolar differential
مقایسه با ADS826E-BB →

ADS826E

✅ جایگزین مستقیم
Texas Instruments
📦 SSOP-28
10 bit · 60 MSPS · Pipelined ADC · 1 input · Single-ended or differential · 60 dB · 74 dBFS · 0.25 LSB

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADS823E

✅ جایگزین مستقیم
Texas Instruments
📦 SSOP-28
10 bit · 60 MSPS · 1 · Pipelined ADC · Single-ended or differential · 60 dB · 74 dBFS · 0.25 LSB

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADS822EG4

✅ جایگزین مستقیم
Texas Instruments
📦 SSOP-28
10 bit · 40 MSPS · 1 · Single-Ended / Differential · Parallel · Pipelined · Internal / External · 60 dB

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADS825E

✅ جایگزین مستقیم
Texas Instruments
📦 SSOP-28
10 bit · 40 MSPS · Pipelined · Single-ended or differential · 1 input · Internal or external · 60 dB · 72 dBFS

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADS8284IRGCR

✅ جایگزین مستقیم
Texas Instruments
📦 SSOP-28
18 bits · 1 MSPS · 4 differential · SAR (Successive Approximation Register) · Pseudo-bipolar differential · 4-channel · Yes (integrated OPA) · 4 V internal

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADS826E-BB حداکثر مقادیر مجاز و مشخصات الکتریکی

رزولوشن 10 bit
Input Channels 1 input
Architecture Pipelined
Maximum Sampling Frequency 60 MHz
Nonlinearity 0.25 LSB
Supply Voltage Range 4.75 V to 5.25 V
محدوده دمای کاری -40°C to +85°C
بسته‌بندی 28-pin SSOP
Package Family SSOP
نوع نصب Surface mount
وضعیت RoHS RoHS

راهنمای پیکربندی پین ADS826E-BB ssop

پیکربندی پین برای ADS826E-BB (پکیج ssop). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج ssop برای ADS826E-BB

داده پین‌آوت تفصیلی موجود نیست برای ADS826E-BB.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADS826E-BB مناسب است برای 6 کاربردs: Industrial Process Monitoring, Communications Signal Capture, Waveform Capture and Analysis, Embedded Data Acquisition, Control and Feedback Systems, Test and Measurement Instruments.

🏭

Industrial Process Monitoring

The ADS826E-BB fits industrial process-monitoring systems that sample pressure, temperature, vibration, or position signals at high speed. Its 10-bit resolution gives 1,024 output levels, while the 60 MHz maximum sampling rate permits rapid acquisition of transient events rather than only slow steady-state measurements. Place the converter behind a sensor amplifier and appropriate filtering, then feed its digital output into a controller. The -40°C to +85°C operating range supports industrial-temperature equipment, but the complete channel still needs calibration, grounding, and input-range design to achieve useful process accuracy.

🌐

Communications Signal Capture

ADS826E-BB can serve as the conversion stage in communications equipment that samples received or transmitted waveforms. Its 60 MHz sampling capability gives designers margin for filtering and signal-bandwidth selection, while the 10-bit output supports compact digital processing and modulation or demodulation algorithms. The single-input pipelined architecture fits compact receiver and transmitter boards, although filtering, gain control, carrier synchronization, and clock cleanliness remain essential. Validate the analog input amplitude against the converter’s full-scale range and confirm the output timing in the surrounding FPGA or digital controller.

📺

Waveform Capture and Analysis

The ADS826E-BB is appropriate for capturing fast-changing analog waveforms in bench instruments, diagnostic equipment, and embedded analyzers. A 60 MHz sampling rate allows repetitive and transient signals to be represented with substantially more timing resolution than a slow general-purpose ADC, while 10-bit resolution provides a practical balance between converter throughput and digital storage requirements. Use the family application circuit as the basis for the reference, clock, decoupling, and output interface. The system should also define the acquisition-memory depth and signal bandwidth so that the selected sampling rate supports the measurements without creating unnecessary data volume.

🧩

Embedded Data Acquisition

ADS826E-BB works well as the analog front end of an embedded acquisition system built around a microcontroller, DSP, or FPGA. Its 10-bit output and single analog input provide a straightforward interface for digital control and analysis, while the 28-pin SSOP package helps limit board area. The 60 MHz capability is valuable when the system must sample multi-axis, pulsed, or high-bandwidth sensor information. Designers should define the data strobe and capture timing, provide a low-noise reference, and keep sensitive analog traces away from clock and digital-output return currents to preserve code accuracy.

🔧

Control and Feedback Systems

The ADS826E-BB can provide fast feedback data for control systems that monitor analog actuator or plant signals. Its 60 MHz conversion capability allows the digital controller to observe fast transients and apply corrections before they drift beyond the system response time, while 10-bit resolution supports proportional measurements. Place the ADC behind an appropriately scaled amplifier so the signal remains inside its input range, and synchronize acquisition with the controller’s update cycle. The system’s settling time, reference accuracy, filtering, and propagation delay must be evaluated together because a high sample rate alone does not guarantee an accurate control-loop result.

🔬

Test and Measurement Instruments

ADS826E-BB fits oscilloscope-like, signal-analysis, and automated test equipment that must capture analog waveforms with predictable timing. The 60 MHz maximum sampling rate supports broad-band measurement and diagnostic functions, and the 10-bit resolution is useful when the display, control loop, or automated classifier does not require greater precision. For laboratory-grade accuracy, use a stable external reference, controlled input attenuation, appropriate source impedance, and separate analog and digital return paths. Calibration should characterize offset and gain, and the input bandwidth should be limited deliberately to avoid aliasing before digitization.

خلاصه محصولات پیشنهادی

ADS823 Pin-compatible 60 MHz family member استفاده‌شده در: Industrial Process Monitoring, Waveform Capture and Analysis, Control and Feedback Systems, Test and Measurement Instruments ADS828 Higher-rate 75 MHz family member استفاده‌شده در: Industrial Process Monitoring, Communications Signal Capture, Waveform Capture and Analysis, Test and Measurement Instruments ADS825 Pin-compatible lower-rate ADC option استفاده‌شده در: Communications Signal Capture, Embedded Data Acquisition ADS826E Texas Instruments استفاده‌شده در: Embedded Data Acquisition ADS822 Pin-compatible 40 MHz control-sampling option استفاده‌شده در: Control and Feedback Systems
What are the key specifications of ADS826E-BB that engineers should know?
The ADS826E-BB is a 10-bit, single-input pipelined ADC capable of 60 MHz sampling with 0.25 LSB nonlinearity. According to the Texas Instruments ADS823/ADS826 family datasheet, the device uses a 28-pin SSOP package and operates across a 4.75 V to 5.25 V supply range. Its -40°C to +85°C temperature range supports industrial-temperature equipment. The 1,024-code output resolution and single-ended analog input make the converter suitable for high-speed measurement, communications, and control applications where compactness and throughput matter more than 12-bit or 16-bit resolution.
What is the operating voltage of ADS826E-BB?
The ADS826E-BB operates from 4.75 V to 5.25 V. The Texas Instruments ADS826E-BB product information identifies this 5 V supply range, while the ADS823/ADS826 family datasheet describes the converter family and its 28-pin SSOP implementation. Designers should use the manufacturer pin-description table to distinguish supply, reference, analog input, clock, and digital-output connections before laying out the PCB.
How fast can ADS826E-BB sample an analog signal?
The ADS826E-BB supports a maximum sampling frequency of 60 MHz. According to the Texas Instruments ADS823/ADS826 family datasheet, ADS823 and ADS826 are specified for operation up to 60 MHz and use a 28-pin SSOP package. This throughput is suitable for rapidly changing waveforms, communications signal capture, waveform analysis, and industrial measurement systems. Practical usable bandwidth also depends on the input network, reference stability, clock quality, and downstream digital acquisition system.
What is the resolution of ADS826E-BB?
The ADS826E-BB provides 10-bit resolution, corresponding to 1,024 possible output codes. The Texas Instruments ADS826E family datasheet identifies the ADS826 as a 10-bit, 60 MHz sampling analog-to-digital converter. This resolution is appropriate for waveform sampling, communications receivers, process monitoring, and embedded control applications where a compact, fast converter is preferred over a lower-speed higher-resolution ADC.
Where can I download the ADS826E-BB datasheet PDF?
The ADS826E-BB datasheet is available through the Texas Instruments ADS823/ADS826 family PDF linked on this page. That document covers the ADS823 and ADS826 converters, including the 10-bit, 60 MHz operating class and 28-pin SSOP configuration. The ADS826E-BB ordering suffix identifies the specific -40°C to +85°C device, so engineers should cross-check the suffix, pin definitions, electrical limits, and package drawing against the ordering information before releasing a design.
Where can I find the ADS826E-BB pinout?
The ADS826E-BB pinout is defined in the pin-description table of the Texas Instruments ADS823/ADS826 family datasheet. The converter uses a 28-pin SSOP package, and the complete mapping should be checked before assigning analog inputs, supplies, reference connections, clock signals, and digital outputs. Use the manufacturer pin-description table when creating PCB symbols or test fixtures rather than relying on a generic SSOP-28 template.
What can replace ADS826E-BB?
The closest documented replacements are pin-compatible members of the Texas Instruments ADS82x family, including ADS826E, ADS823, ADS822, ADS825, and ADS828 in the 28-pin SSOP format. The ADS822 and ADS825 operate up to 40 MHz, while the ADS828 reaches 75 MHz, so conversion rate is the principal selection criterion. According to the Texas Instruments family datasheet, these devices are pin-compatible, but input range, supply details, timing, and acquisition-system requirements must still be checked before substitution.
Is ADS826E-BB the same as ADS826E?
The ADS826E-BB and ADS826E identify the same Texas Instruments 10-bit, 60 MHz converter family and 28-pin SSOP package, with ADS826E-BB carrying the specific ordering suffix. The ADS826E listing identifies a single pipelined input and a 28-pin SSOP, matching the BB device’s core architecture. When replacing the exact ordering code, confirm the temperature grade, tape-and-reel packaging, lot traceability, and any approved-bom requirements rather than treating every ADS826E suffix as interchangeable.
ADS826E-BB vs ADS828 - which is better for waveform acquisition?
Choose the ADS826E-BB when 60 MHz sampling is sufficient, and choose the ADS828 when the acquisition system benefits from its 75 MHz maximum sampling rate. Both are 10-bit converters in the pin-compatible ADS82x family, as described by the Texas Instruments ADS823/ADS826 family datasheet. The higher-rate ADS828 can capture faster signal transitions, while the ADS826E-BB can reduce processing burden when the signal bandwidth does not require the additional sampling capability.
ADS826E-BB vs ADS822 - which is better for a 60 MHz interface?
The ADS826E-BB is the better choice for an interface designed around the 60 MHz maximum sampling rate because the ADS822 is specified for up to 40 MHz. According to the Texas Instruments ADS823/ADS826 family datasheet, ADS822 and ADS826 are pin-compatible 10-bit converters in SSOP-28 packages. The ADS822 can still be suitable for slower signals, but using it in a system that expects 60 MHz sampling would exceed its stated maximum sampling frequency.
When should I choose ADS826E-BB over ADS828?
Choose ADS826E-BB over the ADS828 when 10-bit resolution, a 28-pin SSOP footprint, and up to 60 MHz sampling satisfy the signal-acquisition requirements. The ADS828 supports up to 75 MHz and may suit faster waveforms, but its additional sampling capability is not automatically beneficial. Evaluate the required analog bandwidth, clock rate, downstream processing throughput, acquisition timing, and exact electrical limits in the manufacturer datasheet before selecting the lower-speed member.
Is ADS826E-BB suitable for industrial control applications?
The ADS826E-BB is suitable for many industrial control applications because it supports a -40°C to +85°C operating range and converts at up to 60 MHz with 10-bit resolution. Its single-ended input can be driven by a suitable sensor amplifier or signal-conditioning stage. Industrial suitability also depends on grounding, isolation, surge requirements, calibration, and the accuracy of the complete analog front end rather than the ADC rating alone.
How should I design the input and reference network for ADS826E-BB?
Design the ADS826E-BB input and reference network around the family datasheet’s recommended application circuit, using stable reference voltage, local supply decoupling, and a controlled analog drive path. Because ADS826E-BB is a 60 MHz pipelined converter, long PCB traces and poorly positioned capacitors can introduce settling and coupling errors. Keep the analog input route short, return high-frequency currents through a clean ground path, and verify the complete signal chain with the selected amplifier, reference, and clock source.
Where can I buy ADS826E-BB online?
Use the Request a Quote form on this page to request ADS826E-BB availability, current commercial terms, and lead time for the exact 28-pin SSOP ordering code. The device is listed in commercial catalogs as a 10-bit, 60 MHz, single-input pipelined ADC, but availability can vary by packaging and quantity. Providing the target quantity and required delivery date in the quote request helps procurement confirm the correct production status and supply plan.
What is the price of ADS826E-BB?
The current commercial price for ADS826E-BB should be confirmed through the Request a Quote form on this page. The structured pricing area automatically reflects current sourcing conditions and may include quantity-dependent terms. Specify the required order quantity and whether factory-sealed tape-and-reel packaging is required, since packaging and lead time can affect the final quotation.
What is the lead time and stock status of ADS826E-BB?
Request the current ADS826E-BB stock position and lead time through the Request a Quote form on this page. The ADS826E-BB is offered as a 10-bit, 60 MHz pipelined ADC in a 28-pin SSOP package, but availability should be confirmed for the exact ordering suffix and requested quantity. Procurement should also verify any date-code, traceability, or manufacturer-approved-source requirements before accepting delivery.
Is there a Texas Instruments drop-in alternative with a faster sampling rate?
The Texas Instruments ADS828 is a pin-compatible, higher-speed alternative for a design that can use its 75 MHz maximum sampling rate. According to the Texas Instruments ADS823/ADS826 family datasheet, ADS828 is a 10-bit converter in the same pin-compatible SSOP-28 family as ADS826. The higher sample rate adds acquisition capability but does not relax the need to check voltage ranges, reference requirements, output timing, and system clocking for the exact ADS828 variant.

داده‌های مرجع مهندسی برای ADS826E-BB — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ADS826E-BB when the design requires a 10-bit ADC with up to 60 MHz sampling in a 28-pin SSOP package and an industrial temperature range of -40°C to +85°C. Choose ADS823 when a pin-compatible member with the same 60 MHz sampling class is acceptable and its functional differences have been reviewed. Choose ADS828 when capturing faster signal edges justifies its 75 MHz maximum sampling rate. Choose ADS822 or ADS825 for designs whose signal bandwidth and acquisition pipeline operate comfortably at 40 MHz; both reduce the sampling-rate ceiling by one-third relative to ADS826E-BB. In every case, verify the analog input range, reference arrangement, clocking, output timing, decoupling, and package dimensions against the exact manufacturer datasheet before releasing a drop-in substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول ADS826E ADS823 ADS822 ADS825 ADS828
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SSOP-28 SSOP-28 - same SSOP-28 - same SSOP-28 - same SSOP-28 - same SSOP-28 - same
Resolution 10 bit 10 bit 10 bit 10 bit 10 bit 10 bit
Maximum Sampling Frequency 60 MHz 60 MHz 60 MHz 40 MHz 40 MHz 75 MHz

تفاوت‌های کلیدی

  • Provides the required 60 MHz throughput without a faster converter (در مقابلADS828)
  • Maintains 10-bit resolution while supporting faster acquisition than 40 MHz members (در مقابلADS822)
  • Matches the ADS826 family sampling rate for direct footprint reuse (در مقابلADS823)
  • Uses a documented industrial-temperature ordering suffix (در مقابلADS826E)

یادداشت‌های طراحی

Use the Texas Instruments ADS823/ADS826 family application circuit as the foundation for the analog layout. Place input, reference, and supply-decoupling components close to their associated pins, keep the analog input trace short, and route it away from clock and digital-output traces. A continuous ground plane should carry high-frequency return currents directly beneath the relevant circuitry rather than through long shared paths. Check the SSOP-28 land pattern against the manufacturer package drawing before fabrication.

The ADS826E-BB samples at up to 60 MHz, so clock and analog-input routing must behave as controlled transmission paths rather than general-purpose interconnects. Use the shortest practical clock route, provide a clean return path, and avoid stubs or test-point structures that introduce excessive loading. Match the analog source impedance and filter bandwidth to the converter’s input characteristics. If the full ADC input bandwidth is exercised, include an explicit anti-aliasing filter in the design.

Power the converter from the specified 4.75 V to 5.25 V range and follow the manufacturer’s recommended decoupling arrangement. Local capacitors should be placed at the relevant supply and reference pins with short ground connections. Because the 60 MHz conversion rate can produce fast current transitions, inadequate decoupling may couple supply ripple into the conversion result. Evaluate reference noise, supply ripple, and clock-source jitter together rather than optimizing only the analog signal path.

Do not treat a shared SSOP-28 footprint as sufficient proof that every ADS82x ordering code is a direct substitution. ADS822 and ADS825 are specified at up to 40 MHz, while ADS828 reaches 75 MHz; voltage ranges, reference arrangements, timing, and input characteristics must also be compared with the ADS826E-BB requirements. For an exact replacement, verify the -40°C to +85°C temperature grade, package dimensions, pin definitions, and production documentation before releasing the substitution.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The ADS826E-BB product information identifies the device as RoHS compliant. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADS826E-BB datasheet ADS826E-BB pinout ADS826E-BB datasheet pdf ADS826E-BB equivalent ADS826E-BB replacement ADS826E-BB cross reference ADS826E-BB SSOP-28 pinout ADS826E-BB price ADS826E-BB stock Texas Instruments ADS826E-BB ADS826E-BB vs ADS828 ADS826E-BB application circuit

قطعات و اصطلاحات مرتبط

Texas Instruments ADS826E-BB ADS826E ADS823 ADS822 ADS825 ADS828 analog-to-digital converter ADC pipelined ADC data-converter IC signal-chain semiconductor 10-bit resolution 60 MHz sampling 0.25 LSB nonlinearity single-ended analog input SSOP-28 SSOP package family surface-mount package industrial process monitoring communications signal capture waveform acquisition embedded data acquisition RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ