ADSP-21573CBCZ-5 - 500 MHz Dual-Core SHARC DSP | ADI
MPN: ADSP-21573CBCZ-5 ✓ فعالADSP-21573CBCZ-5 نمای کلی
A digital signal processor, or DSP, is a specialized semiconductor optimized for arithmetic operations on continuously arriving data. Its internal architecture reduces the burden placed on a general-purpose processor by supporting parallel computation, efficient loop execution, and dedicated data paths for filtering, modulation, transforms, and other signal-processing workloads. The ADSP-21573 belongs to the SHARC processor family and combines two processing elements in one device.
The processor's headline characteristics include two SHARC cores, a 500 MHz clock rating, and support for DDR memory. Fixed-point and floating-point processing provide flexibility across control, communications, audio, and measurement workloads. The 1.15 V supply requirement supports compact high-performance embedded systems, although board-level power planning must account for processor, memory, and I/O power together. The commercial temperature rating of -40°C to 95°C permits operation across industrial and extended-temperature environments.
The ADSP-2157x processor architecture is designed around high-throughput signal processing rather than general-purpose operating-system workloads. DDR support can provide greater storage bandwidth for sample buffers, trace data, and complex working sets than a small on-chip buffer alone. Four SPORT channels are identified for the processor family in manufacturer technical material, supporting efficient serial transfer of sampled and processed data. Exact peripheral routing, voltage groups, and signal requirements should be taken from the manufacturer pin-description tables.
Typical uses include real-time audio processing, communications and modem functions, vibration analysis, industrial control, instrumentation, and embedded signal-processing modules. In these systems, the two SHARC cores can divide concurrent processing tasks, while DDR memory accommodates larger data sets. The 400-CSPBGA footprint also demands careful PCB layout because high-speed routing, numerous ground connections, and a large thermal pad require controlled impedance and return paths.
Designers should pay particular attention to power sequencing, decoupling, DDR routing, and exposed-pad thermal management. Because this is a 400-ball BGA device, accurate land patterns, via placement, and assembly-process compatibility should be verified against the manufacturer's package drawing before fabrication. The pinout and full ball assignment cannot be safely reconstructed from catalog summaries.
This product page combines manufacturer identification, package information, operating limits, sourcing guidance, and engineering-oriented design considerations. It also distinguishes confirmed device attributes from details that still require the complete Analog Devices data sheet and hardware design guide.
جایگزینهای drop-in برای ADSP-21573CBCZ-5 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ADSP-21573CBCZ-5 (همان فرمفاکتور و فوتپرینت) — متفاوت در Arithmetic Support.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینADSP-21573CBCZ-5 مشخصات
| Product Type | Fixed/Floating Point Digital Signal Processor (DSP) |
| Processor Family | SHARC |
| Core Configuration | 2x SHARC cores |
| حداکثر فرکانس کلاک | 500 MHz |
| Arithmetic Support | Fixed-point and floating-point |
| Memory Support | DDR |
| Operating Voltage | 1.15 V |
| محدوده دمای کاری | -40°C to 95°C |
| بستهبندی | 400-CSPBGA (17 x 17 mm) |
| Ball Count | 400 balls |
| نوع نصب | Surface Mount |
| Serial Ports | 4 SPORT channels |
| Core Instruction Set | Single-instruction, multiple-data architecture |
راهنمای پیکربندی پین ADSP-21573CBCZ-5 400-cspbga (17 x 17 mm)
پیکربندی پین برای ADSP-21573CBCZ-5 (پکیج 400-cspbga (17 x 17 mm)). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ADSP-21573CBCZ-5.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ADSP-21573CBCZ-5 مناسب است برای 6 کاربردs: Real-Time Audio Processing, Communications Signal Processing, Industrial Vibration Analysis, Precision Instrumentation, Test and Measurement Equipment, Industrial Control Systems.
Real-Time Audio Processing
The ADSP-21573CBCZ-5 fits real-time audio processing because its two 500 MHz SHARC cores can execute fixed-point and floating-point signal calculations concurrently, while four SPORT channels support serialized audio-data movement. Fixed-point arithmetic can suit efficiency-sensitive filtering and mixing paths, while floating-point support can simplify gain control, dynamics processing, and transform calculations. DDR memory gives the processor access to larger sample buffers and working sets than a small internal buffer would permit. The implementation must still account for external-memory latency, deterministic buffering, clocking, and the device's 1.15 V supply architecture.
Communications Signal Processing
The dual-core SHARC architecture makes the ADSP-21573CBCZ-5 appropriate for communications modules that separate channel processing, filtering, modulation, or packet handling across two execution engines. Its 500 MHz rating supports high-throughput arithmetic, and the four SPORT channels provide a path for exchanging sampled data with converters or other serial devices. DDR support can hold larger buffers required by multi-channel or burst-oriented algorithms. A production design should define deterministic buffering, clock recovery, signal integrity, and boot-time memory initialization before assigning the processor to a communications channel.
Industrial Vibration Analysis
The ADSP-21573CBCZ-5 is suitable for industrial vibration analysis when continuous spectral or time-domain processing is required under a stated -40°C to 95°C ambient operating range. Two SHARC cores can divide acquisition-related computation from feature extraction, while fixed-point and floating-point arithmetic support different numerical requirements. DDR memory can accommodate larger acquisition and transform buffers, and the processor's high clock rating supports real-time operation. The system design must include sensor excitation and sampling circuitry, anti-alias filtering, deterministic timing, and thermal qualification of the assembled equipment.
Precision Instrumentation
The ADSP-21573CBCZ-5 can serve as the real-time processing engine in instrumentation that performs continuous filtering, correction, calibration, or spectrum analysis. Its two SHARC cores provide parallel execution capacity, while the processor's support for both fixed-point and floating-point arithmetic allows optimization across control loops and measurement algorithms. The 500 MHz rating and DDR interface support demanding data flows without relying on general-purpose processor scheduling. External converter selection, reference-clock design, memory topology, and calibration storage should be evaluated together because those system choices directly influence achievable accuracy.
Test and Measurement Equipment
The ADSP-21573CBCZ-5 is applicable to test and measurement equipment requiring deterministic real-time processing of multiple data streams. Its two SHARC cores can execute measurement pipelines concurrently, and the four SPORT channels offer dedicated serial connectivity for converters, testers, and capture peripherals. The 500 MHz clock rating supports computationally intensive filtering and transforms, while DDR support accommodates long records and detailed result buffers. Designing the enclosure around the processor also requires attention to thermal dissipation, because the BGA's exposed-pad construction and the surrounding DSP, memory, and interface circuitry determine the achievable ambient operating range.
Industrial Control Systems
The ADSP-21573CBCZ-5 can serve as a high-performance signal-processing core within industrial control systems that combine fast feedback loops with substantial computation. Two SHARC cores allow control and signal-analysis work to run concurrently, and DDR support provides bandwidth for histories, models, or sampled process data. Its stated operating range of -40°C to 95°C supports extended industrial environments when the complete assembly is thermally managed. The system architect should allocate deterministic control tasks carefully, isolate safety-critical functions where required, and qualify the external memory, power rails, and communications interfaces for the deployment environment.
دادههای مرجع مهندسی برای ADSP-21573CBCZ-5 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Package | 400-CSPBGA (17 x 17 mm) |
| Brand | Analog Devices |
| Processor Type | Digital Signal Processor (DSP) |
| Core Configuration | 2x SHARC cores |
| Clock Rating | 500 MHz |
| Arithmetic Support | Fixed-point and floating-point |
| Memory Support | DDR |
| Operating Voltage | 1.15 V |
| Operating Temperature | -40°C to 95°C |
| Serial Interfaces | 4 SPORT channels |
تفاوتهای کلیدی
- Dedicated dual-SHARC processing architecture (در مقابلADSP-SC573)
- Dedicated real-time SPORT connectivity (در مقابلADSP-SC573)
- Fixed- and floating-point workload flexibility (در مقابلADSP-SC573)
یادداشتهای طراحی
Treat the 400-CSPBGA layout as a high-density controlled-impedance design. Follow the manufacturer's land pattern, ball coordinates, mask rules, and assembly guidelines rather than generating a footprint from the 17 x 17 mm body size alone. Plan BGA escape routing, DDR topology, and clock distribution before placement so that power, high-speed memory, and SPORT routes can be routed without layer conflicts or reference-plane interruptions.
Build the power tree around the processor's complete voltage requirements, including the 1.15 V operating point and the supplies required by external DDR and I/O. Place local decoupling at the relevant supply balls using the capacitor values and placement rules in the Analog Devices hardware design guide. Confirm sequencing, ramp limits, voltage tolerances, and power-supply startup behavior before connecting the rails.
Provide the BGA thermal pad with the via pattern and copper area specified by the package documentation. Route heat into the PCB rather than relying only on the small top-side component footprint. Validate the final assembly at the highest expected ambient temperature and processor load because the -40°C to 95°C rating describes device operating conditions, not the thermal performance of an arbitrary enclosure.
Review DDR and clock routing with the board stack-up and interface timing budget in place. Use the manufacturer's reference stack-up and routing guidance, preserve continuous return paths, and avoid test pads or breakouts on sensitive nets where not recommended. SPORT signals also require source-synchronous timing, controlled termination, and verification against the selected external device's electrical characteristics.
Do not substitute the processor solely because another SHARC-family device has a similar clock rating or package name. Verify the complete ball assignment, DDR interface, voltage groups, peripheral mapping, clocking, boot configuration, and software support. The ADSP-SC573 also belongs to a related family, but its Arm Cortex-A5 architecture and processor organization prevent it from being treated as a pin-compatible replacement.
اطلاعات انطباق
The available catalog summaries do not state the lead-free, halogen-free, conflict-minerals, RoHS, or REACH status. The AEC-Q100 field is not applicable to the commercial ADSP-21573CBCZ-5 designation; no automotive-qualified ordering variant is identified.