Analog Devices

ADSP-21991BBCZ - 160MHz Mixed-Signal DSP | Analog Devices

MPN: ADSP-21991BBCZ ✓ فعال
196-ball MBGA, 15 x 15 mm Package 160 MHz Speed Program memory and data memory Memory
حداقل سفارش: 1 |

ADSP-21991BBCZ نمای کلی

Analog Devices ADSP-21991BBCZ is a mixed-signal digital signal processor with a 160 MHz, 16-bit ADSP-219x DSP core, an 8-channel 14-bit ADC capable of 20 MSPS, and a 196-ball MBGA package measuring 15 x 15 mm. It combines real-time signal-processing capability with embedded mixed-signal peripherals for industrial motor-control and signal-processing systems.

A mixed-signal DSP controller is a semiconductor that integrates a digital signal processor with analog acquisition and embedded control functions. The DSP executes filtering, modulation, control, and other fixed-point algorithms, while the integrated ADC converts physical analog inputs into digital data for processing. This combination places analog-to-digital conversion, real-time computation, and system control within one device, reducing the need for separate data converters in compact industrial equipment.

The ADSP-21991 family integrates an ADSP-219x core operating at up to 160 MHz with a 14-bit ADC that supports eight channels and sampling rates up to 20 MSPS. The ADC includes dual sample-and-hold amplifiers for simultaneous sampling. Additional embedded resources include a serial port, an SPI-compatible port, a DMA controller, three programmable timers, programmable flag pins, extensive interrupt capabilities, and on-chip program and data memory.

The fixed-point ADSP-219x architecture supports deterministic real-time execution and is suited to algorithms that repeatedly process sampled signals. Simultaneous sampling is particularly useful in motor-control systems that compare multiple phase or feedback signals acquired at the same instant. The DMA controller can transfer data between memory and peripherals with reduced processor intervention, while the timers and programmable flags support deterministic sampling, timing, and event-driven control.

Typical uses include industrial motor controllers, digital power converters, condition-monitoring equipment, industrial automation, and embedded signal-processing platforms. The integrated ADC is useful when several control or diagnostic channels must be sampled consistently, while the DSP core handles filtering, current or speed calculations, and supervisory control. These applications benefit from a unified mixed-signal architecture rather than a discrete processor and converter arrangement.

PCB design must account for the fine-pitch 196-ball MBGA footprint and high-speed digital and analog routing. Follow the Analog Devices datasheet land pattern, pin assignment, and reference design guidance for power distribution, clocking, grounding, and exposed-ball connections. Confirm the exact package drawing and pin definitions for ADSP-21991BBCZ before fabrication because distributor listings describe the package using differing terminology.

This page consolidates the manufacturer specifications, package details, application guidance, design cautions, and verified sourcing context for ADSP-21991BBCZ. It also distinguishes documented characteristics from parameters that require confirmation with the manufacturer datasheet, helping engineers plan an industrial control or signal-processing design without relying on family-level assumptions.

جایگزین‌های drop-in برای ADSP-21991BBCZ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

ADSP-21991BBCZ مشخصات

Product Type Mixed-signal digital signal processor controller
DSP Core ADSP-219x fixed-point architecture
Core Clock Frequency 160 MHz
DSP Word Length 16 bit
ADC Resolution 14 bit
ADC Channel Count 8 channels
ADC Sampling Rate 20 MSPS
Simultaneous Sampling Dual sample-and-hold amplifiers
Serial Port 1 serial port
Serial Interface SPI-compatible port
DMA Controller Integrated DMA controller
Programmable Timers 3 timers
Programmable Flag Pins Supported
Interrupt Capability Extensive interrupt capabilities
On-Chip Memory Program memory and data memory
بسته‌بندی 196-ball MBGA, 15 x 15 mm
نوع نصب Surface mount
Qualification Qualified for automotive applications
وضعیت RoHS RoHS compliant
Automotive Qualification Qualified for automotive applications
Package Dimensions 15 x 15 mm

راهنمای پیکربندی پین ADSP-21991BBCZ 15 x 15 mm

پیکربندی پین برای ADSP-21991BBCZ (پکیج 15 x 15 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 15 x 15 mm برای ADSP-21991BBCZ

داده پین‌آوت تفصیلی موجود نیست برای ADSP-21991BBCZ.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADSP-21991BBCZ مناسب است برای 6 کاربردs: Industrial Motor Control, Digital Power Conversion, Condition Monitoring, Industrial Automation Controllers, Process Measurement Systems, Audio and Communication Signal Processing.

🏭

Industrial Motor Control

The ADSP-21991BBCZ fits industrial motor-control loops that require rapid feedback acquisition and deterministic fixed-point computation. Its 160 MHz, 16-bit ADSP-219x core can execute current, speed, and position-control algorithms, while the 8-channel, 14-bit ADC samples feedback signals at up to 20 MSPS. Dual sample-and-hold amplifiers support simultaneous measurement of multiple control channels, helping preserve their timing relationship. Three programmable timers, DMA, programmable flags, and extensive interrupt handling support coordinated sampling and control tasks. A practical design should use the manufacturer timing and pin guidance for synchronous current and position sensing.

⚡

Digital Power Conversion

The ADSP-21991BBCZ is applicable to digitally controlled power converters where analog feedback must be acquired and acted upon with deterministic timing. The 160 MHz fixed-point core can calculate control corrections, supervise operating limits, and manage sequencing, while the integrated 14-bit ADC samples voltage and current information at up to 20 MSPS. Eight acquisition channels reduce the need for separate converters when several plant variables must be observed. Simultaneous sampling can improve comparison of related signals. Power-stage isolation, amplifier bandwidth, switching-node layout, and protection design remain external to the DSP and must be engineered separately.

🖥️

Condition Monitoring

The ADSP-21991BBCZ supports embedded condition-monitoring systems that analyze vibration, current, or other sensor signals in real time. Its 160 MHz, 16-bit DSP core can execute filters, feature extraction, spectral analysis, and alarm logic, while the 8-channel, 14-bit ADC provides sampling up to 20 MSPS. Simultaneous acquisition through dual sample-and-hold amplifiers is useful when phase, vibration, and current channels need a common time reference. DMA can move samples between memory and peripherals, and the serial and SPI-compatible ports support a local sensor or communications controller. Sensor excitation, anti-alias filtering, and grounding must be designed around the analog inputs.

🔧

Industrial Automation Controllers

The ADSP-21991BBCZ can serve as the real-time processing center in industrial automation equipment that combines sensor acquisition with embedded control logic. Its 160 MHz ADSP-219x core supports deterministic algorithms, and the integrated 8-channel, 14-bit ADC can acquire control inputs at rates up to 20 MSPS. Timers and programmable flags support periodic jobs and precise event signaling, while DMA reduces processor involvement in block transfers. The serial and SPI-compatible interfaces enable communication with sensors, converters, or a supervisory controller. Choose external interface protection and isolation appropriate to the factory environment and the voltage levels present at each connected node.

📈

Process Measurement Systems

The ADSP-21991BBCZ fits process-measurement equipment that requires flexible analog input sampling followed by real-time filtering or compensation. Eight 14-bit ADC channels operating up to 20 MSPS allow multiple process variables to be captured, and the dual sample-and-hold amplifiers support simultaneous measurements when phase alignment matters. The 160 MHz, 16-bit fixed-point core can perform scaling, digital filtering, linearization, and supervisory calculations. DMA supports efficient sample movement, while three timers can establish acquisition and processing intervals. The analog front end must provide suitable sensing, amplification, input-range compatibility, and anti-alias filtering before the signals reach the converter.

🌐

Audio and Communication Signal Processing

The ADSP-21991BBCZ is suitable for compact embedded signal-processing nodes that acquire one or more analog streams and perform real-time filtering or modulation. Its 160 MHz, 16-bit fixed-point core provides processing capacity for deterministic audio and communications algorithms, while the integrated 8-channel ADC supports sampling rates up to 20 MSPS. The SPI-compatible and serial interfaces can connect to codecs, converters, or network devices, and DMA supports efficient buffer transfer. Clock-source selection, analog bandwidth, alias filtering, and signal-integrity routing require close review. Synchronous sampling is valuable when multiple channels carry related timing or phase information.

What is the ADSP-21991BBCZ?
The ADSP-21991BBCZ is an Analog Devices mixed-signal DSP controller built around a 160 MHz, 16-bit ADSP-219x fixed-point core. It integrates an 8-channel, 14-bit ADC rated up to 20 MSPS, dual sample-and-hold amplifiers, serial and SPI-compatible interfaces, DMA, three timers, programmable flags, and on-chip memory in a 196-ball MBGA package. According to the Analog Devices ADSP-21991 datasheet, the device targets industrial motor control and other high-performance signal-processing applications.
What are the key specifications of ADSP-21991BBCZ that engineers should know?
The principal ADSP-21991BBCZ specifications are a 160 MHz ADSP-219x core, 16-bit fixed-point processing, an 8-channel 14-bit ADC, and a 20 MSPS maximum sampling rate. The ADC provides dual sample-and-hold amplifiers for simultaneous sampling, while DMA, three timers, a serial port, and an SPI-compatible port support deterministic embedded control. The component is packaged in a 196-ball MBGA measuring 15 x 15 mm. These functions come from the Analog Devices manufacturer datasheet and product page.
What is the operating voltage of ADSP-21991BBCZ?
The ADSP-21991BBCZ operating-voltage limits must be taken from the device-specific Analog Devices datasheet before the power rails are designed. The manufacturer documentation confirms a 160 MHz, 16-bit ADSP-219x core and integrated mixed-signal peripherals, but the search results do not state the numerical core and I/O voltage values. Check the electrical-characteristics table for voltage tolerances, sequencing requirements, and absolute-maximum limits rather than applying the ADSP-219x family name to infer power values.
Where can I download the ADSP-21991BBCZ datasheet PDF?
The official ADSP-21991BBCZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADSP-21991.pdf. It is the primary document for electrical characteristics, pin definitions, package drawings, register information, and application guidance. The manufacturer product page is also available at https://www.analog.com/en/products/adsp-21991.html. Use the ordering-information section to confirm the exact package and temperature designation associated with ADSP-21991BBCZ.
Where can I find the ADSP-21991BBCZ pinout and package drawing?
The ADSP-21991BBCZ pinout and package drawing are located in the Analog Devices ADSP-21991 datasheet. The component is listed by DigiKey as a 196-MBGA device in a 15 x 15 mm package, while one third-party listing uses conflicting 176-pin LFQP terminology. Treat the official manufacturer pin-description and package-drawing sections as authoritative. Confirm ball assignments, power balls, ground balls, reserved locations, and the recommended PCB land pattern before releasing artwork.
Is the ADSP-21991BBCZ suitable for industrial motor control?
The ADSP-21991BBCZ is specifically described by Analog Devices as suitable for high-performance industrial motor-control systems. Its 160 MHz, 16-bit DSP core executes real-time control algorithms, while the integrated 8-channel, 14-bit ADC samples control or feedback signals at up to 20 MSPS. Dual sample-and-hold amplifiers support simultaneous sampling, which helps preserve timing relationships among measured channels. Three timers, programmable flags, DMA, and extensive interrupt resources support deterministic system timing.
Where can I buy ADSP-21991BBCZ online?
Use the Request a Quote form on this page to request ADSP-21991BBCZ availability, current unit cost, and quantity breaks. The product is offered by authorized distribution channels, but the retrieved listings do not publish a complete explicit quantity-price table for this exact MPN. Quote requests are therefore the appropriate route for current commercial terms. Provide the required quantity, target reel or tray configuration, date code preference, and destination country when submitting the request.
What is the price of ADSP-21991BBCZ?
Current ADSP-21991BBCZ pricing should be obtained through the Request a Quote form on this page. The retrieved distributor pages describe the exact part, but none displays an explicit quantity-break table that can be transcribed without ambiguity. Because mixed-signal DSP pricing can vary with quantity, shipment configuration, date code, and market conditions, a current quotation is more reliable than a static price reference. Submit the required quantity and delivery location with the request.
What is the lead time for ADSP-21991BBCZ?
The current ADSP-21991BBCZ lead time should be requested through the Request a Quote form on this page. The distributor listings show product availability information, but they do not state a contractually applicable lead time for the required quantity and shipment configuration. When requesting a quotation, specify annual and prototype quantities, desired package shipping method, target date, and approved-source requirements. This allows procurement and supply-chain review to confirm an actionable delivery commitment.
Is ADSP-21991BBCZ in stock?
ADSP-21991BBCZ stock status must be confirmed through the Request a Quote form on this page for the exact quantity and packaging configuration. A distributor listing showing that a part is orderable does not guarantee that inventory is locally available at every volume. Request current stock, factory allocation, and lead time together, and state whether partial shipment is acceptable. This avoids treating general catalog availability as a guaranteed warehouse quantity.
What is the best drop-in replacement for ADSP-21991BBCZ?
No drop-in replacement for ADSP-21991BBCZ can be identified from the available cross-reference information. The retrieved comparison material identifies ADSP-TS201SABP-050 and ADSP-BF607KBCZ-5 as different devices rather than pin-compatible replacements, and no verified candidate confirms the same 196-ball MBGA land pattern, ADSP-219x core behavior, peripheral mapping, voltage configuration, and software compatibility. Do not substitute either named part without a complete hardware and firmware migration review.
Can ADSP-BF607KBCZ-5 replace ADSP-21991BBCZ?
No, ADSP-BF607KBCZ-5 should not be treated as a drop-in replacement for ADSP-21991BBCZ. The available comparison identifies both products as Analog Devices devices but does not establish identical pin mapping, package compatibility, memory resources, ADC architecture, or peripheral functions. The ADSP-21991BBCZ specifically combines an ADSP-219x DSP core with an 8-channel, 14-bit, 20 MSPS ADC. A replacement decision requires schematic, pinout, clock, power, timing, and software compatibility reviews rather than processor-family similarity.
What can replace ADSP-21991BBCZ?
ADSP-21991BBCZ can only be replaced safely after identifying a device with the same electrical, mechanical, timing, and software requirements. No verified drop-in candidate appears in the cross-reference results, while ADSP-TS201SABP-050 is explicitly characterized as a fundamentally different processor. For an existing design, first check whether an exact ordering variant of ADSP-21991 remains suitable. For a redesign, compare package balls, ADC performance, clocking, memory, timers, DMA, interrupt mapping, and software dependencies.
When should I choose ADSP-21991BBCZ instead of a discrete ADC and DSP design?
Choose ADSP-21991BBCZ when a design needs a 160 MHz, 16-bit fixed-point processor and an integrated 8-channel, 14-bit ADC in one compact mixed-signal device. The ADC supports sampling up to 20 MSPS, and dual sample-and-hold amplifiers permit simultaneous acquisition. A discrete ADC plus DSP architecture may offer broader converter choice or a different processor ecosystem, but it requires additional routing, clock coordination, interface design, and board area. The integrated solution is generally attractive when deterministic acquisition and control dominate.
Is ADSP-21991BBCZ suitable for industrial signal processing?
The ADSP-21991BBCZ is suitable for industrial signal-processing and motor-control applications that benefit from deterministic real-time execution. Its 160 MHz, 16-bit ADSP-219x core handles filtering and control algorithms, while the 8-channel, 14-bit, 20 MSPS ADC acquires process or feedback signals. Simultaneous sampling, three timers, programmable flags, DMA, serial communication, and SPI-compatible connectivity support connected embedded systems. The final design must still meet industrial EMC, thermal, isolation, and environmental requirements.

داده‌های مرجع مهندسی برای ADSP-21991BBCZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ADSP-21991BBCZ when the design requires a dedicated real-time mixed-signal processor with an integrated 8-channel, 14-bit, 20 MSPS ADC and deterministic control peripherals. It is particularly effective for industrial motor control, digital power conversion, condition monitoring, and acquisition systems where several signals must be sampled and processed together. The 160 MHz, 16-bit core supports fixed-point filtering and control, while DMA, timers, flags, serial communication, and SPI reduce external support logic. Consider a discrete ADC and DSP architecture when either component can be selected independently, broader converter options are required, or software portability between unrelated processors is more important than board integration. Do not treat the ADSP-TS201SABP-050 or ADSP-BF607KBCZ-5 as direct substitutes; neither has been established as pin-compatible with ADSP-21991BBCZ. For an existing PCB, retain the exact package, ball map, voltage plan, clocking, and software dependencies unless Analog Devices confirms a qualified ordering alternative.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Analog Devices
Package 196-ball MBGA, 15 x 15 mm
Product Type Mixed-signal DSP controller
DSP Core ADSP-219x fixed-point architecture
Core Frequency 160 MHz
DSP Word Length 16 bit
ADC Resolution 14 bit
ADC Channel Count 8 channels
ADC Sampling Rate 20 MSPS
Simultaneous Sampling Dual sample-and-hold amplifiers
DMA Controller Integrated
Programmable Timers 3
Automotive Qualification Qualified for automotive applications

تفاوت‌های کلیدی

  • Integrated high-speed mixed-signal acquisition (در مقابلDiscrete ADC plus DSP architecture)
  • Simultaneous signal capture (در مقابلSingle-converter sequential sampling)
  • Integrated real-time control peripherals (در مقابلDiscrete ADC plus general-purpose microcontroller)

یادداشت‌های طراحی

Use the exact ADSP-21991BBCZ land pattern, ball map, and manufacturing allowances from the Analog Devices package documentation. A 196-ball MBGA on a 15 x 15 mm body requires careful escape routing, and power and ground balls must connect to planes with low impedance. Confirm every pin and reserved-ball designation against the manufacturer ordering table before Gerber release, particularly because third-party package descriptions for this device are inconsistent.

Separate analog input routing from high-speed digital signals and keep the ADC paths short and symmetric. Reference the manufacturer grounding and analog-layout guidance for the selected board stack-up. Place decoupling capacitance at the associated power balls and provide a low-impedance return path for each supply. Where the ADC handles high-dynamic-range signals, control clock crosstalk and return currents because these disturbances can degrade conversion performance even when the digital core operates correctly.

Do not infer voltage, memory, temperature, or timing limits from a generic ADSP-219x reference. Use the ADSP-21991 device-specific electrical tables for supply rails, absolute maxima, clock requirements, memory sizes, and operating-temperature limits. Also verify the package interpretation: the DigiKey listing identifies a 196-MBGA, while another listing describes a 176-pin LFQP. The official manufacturer pin and package drawings should control the PCB design.

Plan clock, memory, serial, and SPI signals as controlled-length routes with continuous references, suitable impedance, and no unintended switching-current coupling into ADC inputs. Confirm the selected clock source and operating mode against the manufacturer timing diagrams. DMA buffers, timer events, and ADC conversions should be scheduled so that interrupt latency and memory bandwidth remain deterministic under the expected control-loop load.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The package listing identifies the component as RoHS compliant and qualified for automotive applications. Specific reach, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADSP-21991BBCZ ADSP-21991BBCZ datasheet ADSP-21991BBCZ specifications ADSP-21991BBCZ pinout ADSP-21991BBCZ package ADSP-21991BBCZ datasheet pdf Analog Devices ADSP-21991BBCZ ADSP-21991BBCZ equivalent ADSP-21991BBCZ replacement ADSP-21991BBCZ motor control ADSP-21991BBCZ 196 MBGA ADSP-21991BBCZ 160MHz ADC ADSP-21991BBCZ price ADSP-21991BBCZ stock

قطعات و اصطلاحات مرتبط

Analog Devices ADSP-21991BBCZ ADSP-21991 ADSP-219x DSP Core mixed-signal DSP controller digital signal processor DSP fixed-point processor semiconductor embedded control industrial motor control signal processing 14-bit ADC 8-channel ADC 20 MSPS dual sample-and-hold amplifiers 160 MHz core 16-bit word length DMA controller SPI-compatible port programmable timers programmable flag pins 196-ball MBGA RoHS AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ