AK7811BB Mono Class-D Audio Amplifier | Asahi Kasei
MPN: AK7811BB ✗ پایان تولیدAK7811BB نمای کلی
A Class-D audio amplifier is a switching amplifier that uses pulse-width modulation to represent an audio waveform. Compared with a continuously conducting linear output stage, this topology is commonly used to reduce power dissipation in portable and space-constrained equipment. A mono configuration is suitable for one independent speaker channel, although its suitability for a complete audio system also depends on input format, output impedance, filtering, supply requirements, and thermal performance.
The AK7811BB is listed as a mono Class-D amplifier in the WLCSP package and is categorized as an obsolete amplifier IC. These details define its core function, package family, and lifecycle position. The compact WLCSP format can reduce board area compared with larger leaded or molded packages, but it also places greater emphasis on land-pattern accuracy, assembly process control, exposed-pad layout where applicable, and careful handling during inspection and rework.
Audio designs using this amplifier normally place its input stage, filtering network, supply connections, and output network according to the manufacturer's recommended application circuit. Component values and stability depend on the selected speaker, filter topology, supply voltage, and PCB environment. Because AK7811BB is an obsolete product, engineers should verify every electrical limit, pin connection, acoustic characteristic, and layout recommendation against the manufacturer datasheet before releasing a new production design.
Typical implementation areas include portable speakers, personal audio equipment, compact sound modules, and auxiliary audio products requiring a single Class-D output. In these systems, the small package helps preserve board area, while the mono architecture reduces the number of output channels that must be accommodated. Thermal performance and output filtering remain central design checks because the amplifier must dissipate power and remove carrier-related switching artifacts from the reproduced audio.
The primary engineering consideration is lifecycle management. AK7811BB is identified as obsolete, so a new design should normally use a currently supported amplifier with a verified package and pinout. An existing product may still require a functionally compatible replacement, but package dimensions, pin assignments, electrical limits, output configuration, and acoustic behavior must be compared rather than relying on the Class-D label alone.
This product record combines the known device classification, lifecycle status, package family, manufacturing format, source documentation, and engineering-oriented replacement guidance. It also distinguishes verified identity information from design checks that must be completed against the manufacturer datasheet, helping engineers assess AK7811BB without relying on ambiguous distributor descriptions.
جایگزینهای drop-in برای AK7811BB — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینAK7811BB حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Mono Class-D audio amplifier IC |
| Amplifier Category | Linear - Amplifiers - Audio |
| Output Channel Configuration | Mono, 1 channel |
| Amplifier Topology | Class D |
| Manufacturer | Asahi Kasei Microdevices |
| وضعیت چرخه عمر | Obsolete |
| بستهبندی | WLCSP |
| نوع نصب | Surface mount |
| Packaging | Tape & Reel |
راهنمای پیکربندی پین AK7811BB wlcsp
پیکربندی پین برای AK7811BB (پکیج wlcsp). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای AK7811BB.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
AK7811BB مناسب است برای 6 کاربردs: Portable Mono Speaker, Personal Audio Accessory, Compact Audio Module, Auxiliary Audio Product, Battery-Powered Sound Device, Industrial Audio Notification Product.
Portable Mono Speaker
The AK7811BB fits the functional role of a single-channel Class-D output stage in a compact portable speaker. Its mono configuration provides one dedicated audio channel, while the WLCSP package limits the footprint occupied by the amplifier. A practical implementation would use the manufacturer application circuit and verify the speaker impedance, supply range, output power, thermal rise, and filter component values before release. Because the device is obsolete, it is most appropriate for maintenance of an existing approved design. A new portable-speaker platform should normally use a supported amplifier and a current thermal and acoustic evaluation.
Personal Audio Accessory
AK7811BB can serve as the mono Class-D amplifier in a small personal-audio module connected to a single speaker or transducer. The one-channel architecture is appropriate where the product requires only one amplified output, and the WLCSP package supports dense board layouts. Engineering validation must confirm input coupling, output filtering, supply noise sensitivity, startup behavior, and protection against the connected speaker load. For compact battery-powered equipment, thermal efficiency and EMI behavior are especially important. Since AK7811BB is obsolete, engineers maintaining an existing module should use the original manufacturer recommendations, while new products should compare currently supported Class-D devices.
Compact Audio Module
The AK7811BB is applicable to a compact audio subassembly requiring one Class-D amplification channel. Its small WLCSP footprint leaves board area for signal conditioning, filtering, connectors, and power conversion, while the mono topology avoids allocating a second output amplifier channel. The design must account for the amplifier's complete application circuit, including input and output networks, decoupling, grounding, and thermal management. Validation should include sustained playback at the intended supply voltage and worst-case speaker load. Because the part is obsolete, preserve its documented operating envelope and consider it only where lifecycle continuity or existing PCB compatibility outweighs the benefits of a newer device.
Auxiliary Audio Product
AK7811BB can support an auxiliary audio product with one local Class-D output. The part is suited to a system in which a separate signal path requires a dedicated mono amplifier rather than sharing a multi-channel codec output. The WLCSP package helps minimize board area, although fine-pitch assembly and inspection require a controlled manufacturing process. Designers should verify channel noise, distortion, output-filter characteristics, startup sequencing, and speaker impedance against the manufacturer datasheet. For a newly introduced auxiliary product, a current amplifier with defined protection, thermal, and lifecycle support is generally preferable because the AK7811BB is classified as obsolete.
Battery-Powered Sound Device
The AK7811BB's mono Class-D organization can be considered for a battery-powered sound device that drives one speaker from a local audio channel. Class-D operation can support efficient power delivery, while the WLCSP package minimizes the physical area needed for the amplification stage. Actual battery suitability depends on matching the amplifier's supply voltage and output capability to the cell range and speaker load. Quiescent consumption, thermal performance, startup behavior, and filter-induced losses must be evaluated because they determine usable playback time. For an existing battery-powered product, confirm the obsolete part's operating limits from the manufacturer datasheet before approving continued use.
Industrial Audio Notification Product
AK7811BB may be used in a compact industrial audio-notification product that requires one Class-D output channel. The mono configuration can drive a single alert speaker, and the WLCSP package assists with compact board construction. Industrial suitability depends on the operating-temperature limits, power-supply tolerance, protection behavior, and EMC performance, none of which should be inferred solely from the amplifier category. Verify these characteristics in the manufacturer datasheet and the product's applicable qualification requirements. Because AK7811BB is obsolete, new industrial products should generally use a supported amplifier with documented lifecycle and qualification support unless maintaining an established platform is mandatory.
دادههای مرجع مهندسی برای AK7811BB — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | WLCSP |
| Product Type | Mono Class-D audio amplifier IC |
| Output Channels | 1 channel |
| Amplifier Topology | Class D |
| Lifecycle Status | Obsolete |
| Packaging | Tape & Reel |
| Mounting Type | Surface mount |
تفاوتهای کلیدی
- Established mono Class-D identity (در مقابلNo confirmed drop-in alternative)
- Compact surface-mount package (در مقابلNo confirmed drop-in alternative)
- Tape-and-reel production format (در مقابلNo confirmed drop-in alternative)
یادداشتهای طراحی
Use the manufacturer package drawing and application layout when creating the WLCSP footprint. Confirm terminal count, pitch, pad dimensions, solder-mask clearance, and exposed-pad treatment before fabrication. Place input, feedback, supply, and output-filter connections according to the recommended reference layout, and minimize the distance between the amplifier, local supply decoupling, and output-network components.
A Class-D output stage requires deliberate filtering and return-path control because switching energy appears at the amplifier output. Use the manufacturer-recommended LC output network, keep the speaker and filter connections short, and provide a low-impedance return path for high-frequency currents. Verify radiated emissions, conducted emissions, and audio-band artifacts on the final PCB rather than relying only on schematic inspection.
Validate thermal performance with the intended supply voltage, continuous output level, and speaker impedance. Class-D efficiency reduces theoretical conduction loss but does not eliminate heat from output current, switching transitions, or package and copper limitations. Check the manufacturer thermal characterization, monitor the exposed-pad or pad layout where applicable, and confirm that the enclosure does not trap heat around the WLCSP device.
Do not treat any mono Class-D amplifier as automatically interchangeable with AK7811BB. Before replacing the obsolete device, compare the WLCSP footprint, terminal functions, supply range, output configuration, output-filter interface, protection behavior, and acoustic performance. Also verify the reel quantity and manufacturing code because package identifiers alone may not distinguish every production variant.
اطلاعات انطباق
The product listings do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than inferred for an obsolete device.