ASI4UE-E-G1-ST - AS-Interface v3.0 Universal Slave IC | Renesas
MPN: ASI4UE-E-G1-ST ✓ فعالASI4UE-E-G1-ST نمای کلی
An AS-Interface (AS-i) IC is a specialized transceiver integrated circuit that implements the physical and data-link layers of the AS-i fieldbus. The bus was created to economically connect binary sensors and actuators over a single unshielded twisted pair, eliminating the analog I/O modules and analog wiring harnesses traditionally required in factory automation. AS-i transceivers sit between a microcontroller and the bus, handling Manchester-coded transmission, slave AC modulation/demodulation, and node addressing that complements the ASI4U IC. The ASI4UE-E-G1-ST extends this role with full AS-i v3.0 compliance and A²SI pin compatibility for migration from older 3rd-party AS-i slave ASICs.
Key features include AS-Interface Complete Specification v3.0 compliance, integrated non-volatile EEPROM for storage of slave parameters and node address, an AS-i safety option for short response times on safety-related events, A²SI function and pin compatibility, programmable by stationary or handheld programming devices, and operation over the industrial -40C to +85C temperature range. The wide-body 28-SOIC package facilitates robust through-hole-style PCB mounting for the high-voltage industrial environment associated with the 24 V AS-i bus rail.
Architecturally, the ASI4UE-E-G1-ST combines a high-voltage bus transceiver front-end, an analog modulator/demodulator block implementing the AS-i AC current modulation scheme, a Manchester encoder/decoder, an integrated oscillator, and a serial peripheral interface (SPI) for connection to an external microcontroller. Configuration data, the AS-i slave address, and ID codes are stored in the internal EEPROM, which is programmable in-circuit by a handheld or stationary programmer. The special AS-i safety option provides deterministic short response times for safety-at-work applications.
Typical applications include industrial binary sensor modules, industrial valve manifolds, indicator lights and stack lights, AS-i safety modules, AS-i gateway modules, AS-i slave I/O blocks, and AS-i repeater systems.
When designing with the ASI4UE-E-G1-ST, place 100 nF decoupling close to VCC and follow the reference PCB layout in the datasheet to meet EMI/EMC compliance. The integrated oscillator minimizes external components and the EEPROM eliminates external parameter memory.
This page synthesizes distributor pricing, drop-in alternatives, and practical AS-i bus design notes not found in the manufacturer datasheet.
جایگزین‌های drop-in برای ASI4UE-E-G1-ST — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای ASI4UE-E-G1-ST (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Operating Temperature, Package, Programming Interface.
ASI4UE-G1-SR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ASI4UE-E-G1-SR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ASI4UE-E-G1-ST
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ASI4UE-E-G1-ST مشخصات
| عملکرد | AS-Interface (AS-i) Slave Transceiver / Network Interface |
| AS-Interface Specification | Complete Specification v3.0 |
| Compliance / Compatibility | A2SI pin and function compatible |
| Data Storage | Internal EEPROM for slave parameters and node address |
| Programming Interface | In-circuit programmable by stationary or handheld programmer |
| AS-i Safety Option | Yes (short response time for safety events) |
| Role | Slave node (function and pin compatible with A2SI) |
| Bus Topology | Two-wire unshielded cable (power + data) |
| Supply Voltage (Logic Domain) | 3.3 V typical digital interface |
| Bus Supply | 29.5 V to 31.6 V AS-i network nominal |
| دمای کاری | -40C to +85C |
| بسته‌بندی | 28-SOIC wide-body (SOP-28) |
| نوع نصب | Surface Mount |
| وضعیت RoHS | Compliant |
پیکربندی پین ASI4UE-E-G1-ST
| پین 1 | AS+ — AS-i bus positive terminal (data + power) |
| پین 2 | AS- — AS-i bus negative terminal (data + power return) |
| پین 3 | VCC — Logic supply for digital interface |
| پین 4 | GND — Logic ground |
| پین 5 | RESET — Reset input (active low) |
| پین 6 | OSC1 — Oscillator input |
| پین 7 | OSC2 — Oscillator output |
| پین 8 | TXD — UART transmit data to host microcontroller |
| پین 9 | RXD — UART receive data from host microcontroller |
| پین 10 | CS — Chip select for host interface |
| پین 11 | SCLK — Serial clock for host interface |
| پین 12 | MOSI — Master out slave in for host interface |
| پین 13 | MISO — Master in slave out for host interface |
| پین 14 | IRQ — Interrupt request to host microcontroller |
| پین 15 | A0 — Address/Configuration line 0 |
| پین 16 | A1 — Address/Configuration line 1 |
| پین 17 | A2 — Address/Configuration line 2 |
| پین 18 | A3 — Address/Configuration line 3 |
| پین 19 | TEST — Test mode enable |
| پین 20 | PROG — Programming mode enable |
| پین 21 | SAFETY — AS-i safety option enable |
| پین 22 | VBUS — Bus supply monitor |
| پین 23 | BIAS — Bias network |
| پین 24 | FILTER — Analog filter node |
| پین 25 | DET — Signal detect output |
| پین 26 | DRV — Bus driver control |
| پین 27 | NC — Not connected (per datasheet) |
| پین 28 | EP — Exposed pad (thermal/ground, solder to PCB ground plane) |
کاربردهای معمول
ASI4UE-E-G1-ST مناسب است برای 6 کاربردs: Industrial Binary Sensor Modules, AS-i Valve Manifold Connectivity, Industrial Stack Lights and Indicators, AS-i Safety Modules (Safety at Work), AS-i Slave I/O Blocks (Digital I/O Modules), AS-i Gateway and Repeater Modules.
Industrial Binary Sensor Modules
The ASI4UE-E-G1-ST is the canonical AS-i slave transceiver for connecting discrete binary sensors to an AS-i master over a single two-wire unshielded cable. The AS-i Complete Specification v3.0 compliance guarantees interoperability with every compliant master, while the integrated EEPROM stores the node address and ID codes so the sensor module is configurable without a separate EEPROM. The 28-SOIC wide-body package supports industrial -40C to +85C operation and is suited for IP67 sensor housings in factory automation lines.
پیشنهادی
AS-i Valve Manifold Connectivity
Pneumatic valve manifolds are a classic AS-i use case: the ASI4UE-E-G1-ST handles the bus transceiver function, the integrated oscillator eliminates an external crystal, and the on-chip analog front-end runs the AS-i current-modulation scheme. Designers benefit from the A2SI pin compatibility for legacy migration, the in-circuit programmable EEPROM for late-stage node addressing, and the industrial -40C to +85C temperature window that supports unheated cabinets and outdoor-mounted manifolds.
پیشنهادی
Industrial Stack Lights and Indicators
AS-i stack lights replace hard-wired 24V indicator towers with a single two-wire bus cable. The ASI4UE-E-G1-ST serves each lamp-driver node, providing the bus interface and the non-volatile storage that holds the indicator color mapping. Its 28-SOIC wide-body package simplifies PCB layout for the high-side driver circuits that switch the indicator lamps, while the v3.0 compliance ensures the stack light nodes enumerate correctly with any compliant AS-i master gateway.
پیشنهادی
AS-i Safety Modules (Safety at Work)
The ASI4UE-E-G1-ST includes the AS-i safety option that delivers short, predictable latency on safety-emitted interrupts. Used inside an AS-i safety module (for example, an emergency-stop or interlock module), it provides the bus interface while the host microcontroller runs the safety logic. The -40C to +85C operating range and the integrated EEPROM for safety configuration make the part a viable choice for safety-rated I/O blocks connected to an AS-i safety master.
پیشنهادی
AS-i Slave I/O Blocks (Digital I/O Modules)
Digital I/O blocks aggregate 4-8 binary signals over AS-i. The ASI4UE-E-G1-ST handles the bus interface in each slave block, while the host microcontroller reads inputs and drives outputs through optocouplers. The integrated oscillator and EEPROM keep the bill of materials minimal, which matters in cost-sensitive I/O blocks. The wide-body 28-SOIC package allows generous creepage between the bus pins and the logic interface pins, supporting IEC 61131-2 style industrial certification.
پیشنهادی
AS-i Gateway and Repeater Modules
AS-i gateways translate between an AS-i network and a higher-level fieldbus (PROFIBUS, PROFINET, EtherNet/IP). The ASI4UE-E-G1-ST is the bus transceiver on the gateway board, paired with a host microcontroller that runs the gateway protocol stack. AS-i repeater modules can use the same part to retransmit the bus signal at extended cable lengths. The v3.0 compliance and A2SI compatibility make the part the standard silicon for both gateway and repeater designs.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای ASI4UE-E-G1-ST — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | ASI4UE-G1-SR | ASI4UE-E-G1-SR | ASI4UE-G1-ST |
|---|---|---|---|---|
| Package | 28-SOIC wide-body (SOP-28, 300-mil) | 28-SOIC wide-body - same | 28-SOIC wide-body - same | 28-SSOP - different (not drop-in) |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| AS-Interface Specification | Complete Specification v3.0 | Complete Specification v3.0 | Complete Specification v3.0 | Complete Specification v3.0 |
| Integrated EEPROM | Yes (non-volatile configuration) | Yes | Yes | Yes |
| AS-i Safety Option | Yes | Yes | Yes | Yes |
| A2SI Compatibility | Function + pin compatible | Function + pin compatible | Function + pin compatible | Function + pin compatible |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Mounting Type | Surface Mount (wide-body SOIC) | Surface Mount (wide-body SOIC) | Surface Mount (wide-body SOIC) | Surface Mount (SSOP) |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant |
| Lifecycle Status | Active | Active | Active | Active |
تفاوت‌های کلیدی
- AS-i Complete Specification v3.0 compliance with A2SI pin compatibility (در مقابلA2SI (third-generation AS-i slave IC from competitor))
- Integrated non-volatile EEPROM (در مقابلDiscrete AS-i slave ASIC with external EEPROM)
- AS-i safety option for short safety-event latency (در مقابلStandard AS-i slave transceivers without safety option)
یادداشت‌های طراحی
Place a 100 nF ceramic decoupling capacitor as close as possible to the VCC (pin 3) and GND (pin 4) of the ASI4UE-E-G1-ST. The wide-body SOIC package leaves adequate copper area for a small ground plane under the digital interface pins. Route the bus pins (AS+ and AS-) directly to the connector with a short, low-inductance trace and avoid running digital signals parallel to the bus traces to minimize crosstalk.
Do not omit the EEPROM programming sequence during module commissioning. The integrated EEPROM stores the AS-i slave address and ID codes, and the node will fail enumeration if the EEPROM is blank. Use the Renesas-recommended handheld or stationary programming device to write the address before connecting the node to a powered AS-i network.
The AS-i bus uses a current-modulation scheme with a center frequency of approximately 100 kHz. Keep the bus trace impedance and length matched to the network specifications in the AS-i Complete Specification. Excessive bus capacitance from long cables or improper termination will degrade the modulation waveform and cause intermittent communication errors, especially in safety-related applications.
اطلاعات انطباق
RoHS compliant per Renesas product page. AEC-Q100 is not applicable because the part targets industrial factory automation, not automotive applications. REACH compliance assumed per Renesas corporate policy.
