ATF22LV10CQZ-30PI - 30ns 22V10 PLD | Microchip Technology
MPN: ATF22LV10CQZ-30PI ✓ فعالATF22LV10CQZ-30PI نمای کلی
A simple programmable logic device, or SPLD, is a user-programmable digital logic component within the broader field of programmable logic devices. Its internal macrocells can be interconnected to implement Boolean equations, decoding, control logic, and state-machine functions. Electrically erasable flash memory allows the configuration to be retained while supporting reprogramming, making the ATF22LV10CQZ suitable for small control-logic blocks that do not justify a larger CPLD or FPGA.
The ATF22LV10CQZ family supports propagation delays down to 25 ns across its speed grades. This particular -30PI configuration provides a 30 ns grade for industrial-temperature operation. The 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system rails, while the 10-macrocell architecture provides 500 gates of logic capacity. A dedicated power-down feature can place the device into zero standby power-down mode, reducing consumption when the associated logic is inactive.
Internally, the ATF22LV10CQZ is a high-performance CMOS programmable logic device using electrically erasable flash memory for configuration storage. The macrocell-based architecture provides a practical balance between logic density, predictable timing, and simple device programming. Because flash configuration is nonvolatile, the programmed function remains available after power removal without requiring an external configuration PROM or continuous SRAM refresh.
Typical applications include industrial control, interface decoding, counter and timer logic, instrumentation, embedded system control, and legacy peripheral emulation. The 24-PDIP package is especially useful for prototypes, test fixtures, and systems assembled through through-hole assembly. It may also fit repaired or legacy boards that specifically require the ATF22LV10CQZ 24-pin footprint and its documented 3.0 V to 5.5 V interface.
When designing around this device, confirm that the board uses the 24-pin PDIP pinout and that the programmed pin configuration matches the target application. Avoid changing the device type, supply voltage, or temperature designation without reviewing the manufacturer datasheet for pin-level and timing differences. The power-down pin should be driven only in a sequence compatible with the surrounding logic to prevent unintended state transitions during startup.
This product page combines the manufacturer device specifications, verified package and speed information, practical selection guidance, same-footprint alternatives, and design-focused implementation notes. It also distinguishes the industrial -30PI ordering code from commercial-temperature and different-package variants that may otherwise appear similar in broad PLD searches.
جایگزینهای drop-in برای ATF22LV10CQZ-30PI — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ATF22LV10CQZ-30PI (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Mounting Type, Package, Technology.
ATF22LV10C-10PI
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATF22LV10C-15PI
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATF22LV10CQZ-30PC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22V10C-10PU
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10CQZ-30JC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10CQZ-30PI حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | 22V10 simple programmable logic device (SPLD) |
| Technology | High-performance CMOS with electrically erasable flash memory |
| Logic Capacity | 500 gates |
| Macrocells | 10 macrocells |
| Target Speed Grade | 30 ns |
| Family Minimum Propagation Delay | 25 ns |
| Operating Supply Voltage Range | 3.0 V to 5.5 V |
| Power-Down Mode | Zero standby power-down mode |
| Temperature Class | Industrial temperature |
| بستهبندی | 24-PDIP, 0.300 inch row spacing, 7.62 mm |
| نوع نصب | Through-hole insertion |
| Programmable Memory | Electrically erasable flash memory |
| Programming | User-programmable logic configuration |
| Logic Families Supported | CMOS |
| تعداد پینها | 24 pins |
راهنمای پیکربندی پین ATF22LV10CQZ-30PI 24-pdip, 0.300 inch row spacing, 7.62 mm
پیکربندی پین برای ATF22LV10CQZ-30PI (پکیج 24-pdip, 0.300 inch row spacing, 7.62 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATF22LV10CQZ-30PI.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATF22LV10CQZ-30PI مناسب است برای 6 کاربردs: Industrial Control Logic, Legacy Peripheral Emulation, Instrumentation Signal Control, Counter and Timer Logic, Interface Decoding, Embedded System Control.
Industrial Control Logic
The ATF22LV10CQZ-30PI fits compact industrial control blocks that require nonvolatile Boolean logic, 3.0 V to 5.5 V operation, and an industrial-temperature ordering option. Its 10 macrocells can implement state-machine transitions, interlocks, command decoding, and output-enable logic without using a larger FPGA. The 30 ns speed grade should be compared against the worst-case path delay required by the control loop. For a through-hole industrial controller, the 24-PDIP package also simplifies inspection, rework, and replacement. Use the manufacturer pin description and timing tables to define each macrocell connection, and validate the final ambient range against the device specification before releasing the production design.
پیشنهادی
Legacy Peripheral Emulation
ATF22LV10CQZ-30PI can reproduce the compact decoding, masking, or sequencing logic formerly implemented by a simple PLD in legacy equipment. Its 10 macrocells and 500-gate capacity are suitable for small glue-logic functions, while electrically erasable flash memory preserves the configuration between power cycles. The 3.0 V to 5.5 V range supports both 3.3 V and 5 V interface environments when output drive and propagation delay are acceptable. For repair and modernization, the 24-PDIP format allows direct board-level inspection in an existing through-hole assembly. Confirm that the legacy board has the same package and pin functions, then validate the replacement against the original system timing rather than assuming identical behavior from the device family name.
پیشنهادی
Instrumentation Signal Control
The ATF22LV10CQZ-30PI is appropriate for digital control around analog measurement and interface circuits where a small amount of deterministic logic is needed for range selection, data masking, or trigger coordination. The 500-gate architecture avoids committing a larger programmable device to simple control functions, while the flash-based configuration provides a stable implementation after power removal. Its 30 ns speed class must be included in worst-case acquisition and control timing calculations. The 24-PDIP package can also support prototype instrument boards that use sockets or through-hole assembly. Use the ATF22LV10C datasheet to review clock, setup, hold, and output timing, and ensure that the 3.0 V to 5.5 V operating range matches the interface rails used by the surrounding instrumentation.
پیشنهادی
Counter and Timer Logic
ATF22LV10CQZ-30PI can implement counters, dividers, event counters, and timing-state logic where each transition must be retained between power cycles. Its 10 macrocells provide enough architecture for modest control sequences rather than high-density arithmetic, and the electrically erasable flash configuration eliminates an external configuration memory. The device's 30 ns propagation grade should be mapped to the required clock and output timing, especially when cascading several logic levels. A 24-PDIP package is useful in industrial timer modules, test equipment, and legacy controller boards that require through-hole replacement. Validate the pin assignment, maximum operating frequency, and power-down behavior in the manufacturer documentation, then verify the complete timing chain on the assembled board.
پیشنهادی
Interface Decoding
The ATF22LV10CQZ-30PI suits address decoding, chip-select generation, command qualification, and peripheral routing where a compact, nonvolatile decoder is needed. The 500-gate ATF22V10 architecture offers a practical implementation level for several concurrent decode functions without introducing a larger CPLD or FPGA. Because the 24-PDIP package has a larger footprint than modern leadless programmable devices, it is most attractive for repair, prototyping, education, and legacy-system extension rather than new space-constrained products. Validate output timing against the slowest downstream device and check that all interface levels remain within the 3.0 V to 5.5 V supply range. Program the flash configuration and test every decoded state, including inactive and power-down transitions.
پیشنهادی
Embedded System Control
ATF22LV10CQZ-30PI can serve as a small subsystem controller for reset sequencing, watchdog qualification, bus arbitration, or power-state coordination in an embedded product. Its 10 macrocells and 500 gates are sufficient for discrete control functions when they remain separate from the main processor. Electrically erasable flash retains the control tables in the field, and the 3.0 V to 5.5 V operating range supports common embedded supply rails. The 30 ns grade and 24-PDIP footprint make the part more appropriate for existing boards, industrial controllers, and prototypes than highly integrated new consumer systems. Review the power-down pin behavior, input states during transitions, and timing margins against the processor interface before production release.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ATF22LV10CQZ-30PI — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ATF22LV10C-10PI | ATF22LV10C-15PI | ATF22LV10CQZ-30PC | ATF22V10C-10PU | ATF22LV10CQZ-30JC |
|---|---|---|---|---|---|---|
| Package | 24-PDIP | 24-PDIP - same | 24-PDIP - same | 24-PDIP - same | 24-PDIP - same | 24-PDIP - package listing requires PCB compatibility verification |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | ATF22LV10CQZ | ATF22LV10C | ATF22LV10C | ATF22LV10CQZ | ATF22V10C | ATF22LV10CQZ |
| Speed Grade | 30 ns | 10 ns | 15 ns | 30 ns | 10 ns | 30 ns |
| Logic Capacity | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Supply Voltage | 3.0 V to 5.5 V | 3.3 V/5 V | 3.3 V/5 V | 3.3 V/5 V | 3.3 V/5 V | 3.3 V/5 V |
| Temperature Designation | Industrial temperature (PI) | Industrial temperature (PI) | Industrial temperature (PI) | Commercial temperature (PC) | Industrial temperature (PU) | Commercial temperature (JC) |
| Configuration Memory | Electrically erasable flash memory | Electrically erasable programmable logic device | Electrically erasable programmable logic device | Electrically erasable flash memory | ATF22V10C programmable logic device | Electrically erasable flash memory |
تفاوتهای کلیدی
- Industrial-temperature ordering option with the same DIP footprint (در مقابلATF22LV10CQZ-30PC)
- Retains the 30 ns speed class for legacy timing compatibility (در مقابلATF22LV10C-10PI)
- Uses the QZ electrically erasable flash-memory family (در مقابلATF22V10C-10PU)
یادداشتهای طراحی
Do not treat every ATF22LV10 suffix as electrically interchangeable. The -30PI part is a 30 ns industrial-temperature 24-PDIP device, while the -30PC uses the commercial-temperature designation and the -30JC listing shown in the cross-reference data identifies a PLCC package. Confirm the exact package, temperature grade, speed class, supply range, pin functions, and programming-device compatibility before approving a substitution.
Build timing closure around the complete path rather than a single propagation-delay figure. Compare the 30 ns grade with the required clock period, setup, hold, output-disable, and worst-case macrocell-chain delay from the manufacturer timing tables. The ATF22LV10C-10PI and ATF22LV10C-15PI alternatives provide lower propagation-delay classes, but a faster speed grade does not eliminate board-level skew, loading, or clock-distribution issues.
Design the supply rails and power-down behavior together. The ATF22LV10C family operates down to 3.0 V and supports a 3.0 V to 5.5 V range, but the selected system voltage must also satisfy input thresholds, output levels, and timing. Use the power-down pin according to the manufacturer description, ensuring that it cannot float during startup and that downstream logic interprets the transition in a valid state.
Use the 24-PDIP footprint only after comparing the manufacturer's dimensional drawing with the existing board. Leave straight access to all leads for inspection, rework, and socketed assembly where applicable. If the design is being migrated from a smaller PLCC or SOIC package, treat the change as a layout redesign and recheck component clearance, connector orientation, and programming access rather than assuming board compatibility.
اطلاعات انطباق
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the retrieved manufacturer and distributor results. The PI suffix indicates an industrial-temperature ordering option, not an automotive qualification statement.