ATSAME54P20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash, Ethernet | Microchip
MPN: ATSAME54P20A-AF ✓ فعالATSAME54P20A-AF نمای کلی
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a programmable set of peripherals. The SAM E54 sits in the high-performance tier of Microchip's Cortex-M4F portfolio, sharing the SAM D5x/E5x family architecture with a deterministic interrupt model, ARM TrustZone-M support, and a 12-bit 1 Msps ADC for precision analog acquisition.
Key features of the ATSAME54P20A-AF include up to 120 MHz CPU clock with FPU and DSP extensions, 1 MB Flash / 256 KB SRAM with single-error-correction ECC, an integrated 10/100 Ethernet MAC with IEEE 1588 PTP support, and Dual CAN-FD controllers for high-throughput automotive/industrial networking. A high-speed USB 2.0 Full-Speed interface, a 12-bit 1 Msps ADC with up to 32 channels, and multiple SERCOM peripherals deliver flexible communication.
Architecturally, the SAM E54 uses a Cortex-M4F core with tightly-coupled memory, a 4 KB instruction cache, and a multi-layer bus matrix for parallel peripheral access. The dual-panel Flash allows simultaneous read-while-write, enabling live firmware updates without halting code execution. ECC on both Flash and SRAM is critical for functional-safety applications targeting IEC 61508 or ISO 26262.
Typical applications include industrial Ethernet gateways, building automation controllers, automotive body and chassis ECUs, smart energy / solar inverter control, and human-machine interface (HMI) panels with TFT displays. The combination of Ethernet + CAN-FD + USB positions this MCU as a networking hub.
Design tip: bypass VDDIO/VDDIN pins with 100 nF + 4.7 uF ceramics placed within 3 mm of the package, and provide a dedicated ferrite on AVDD for the ADC to achieve full 12-bit ENOB. Trace routing for the Ethernet RMII signals should be length-matched within 50 mils.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer datasheet to support rapid component selection.
جایگزین‌های drop-in برای ATSAME54P20A-AF — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATSAME54P20A-AF (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Flash Memory, SRAM, Operating Temperature, USB, ADC.
ATSAME54P19A-AF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATSAME54P20A-AFT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAME54P20A-AUT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAME54P19A-AU
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAME54N19A-AF
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAME53P20A-AF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATSAME54P20A-AF حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | ARM Cortex-M4F with FPU and DSP extensions |
| Maximum CPU Clock | 120 MHz |
| Program Memory (Flash) | 1 MB (Dual Panel, with ECC) |
| Data Memory (SRAM) | 256 KB (with ECC) |
| بسته‌بندی | 128-pin TQFP (14x14 mm) |
| Operating Voltage | 1.71 V to 3.6 V |
| دمای کاری | -40 C to +125 C (Extended) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 PTP |
| CAN-FD Controllers | 2 (Dual CAN-FD) |
| USB Interface | USB 2.0 Full-Speed Host/Device |
| ADC | 12-bit, up to 1 Msps, up to 32 channels |
| SERCOM Peripherals | Yes (configurable UART/SPI/I2C) |
| TrustZone-M | Yes (ARM TrustZone for Cortex-M) |
| Cache | 4 KB instruction cache |
| وضعیت RoHS | Compliant |
| نوع نصب | Surface Mount |
| سطح MSL | 3 |
| Lead-Free / Halogen-Free | Yes (per Microchip product page) |
پیکربندی پین ATSAME54P20A-AF
| پین 1 | VDDIO — Digital I/O supply voltage (1.71V-3.6V) |
| پین 2 | PA00 — GPIO / SERCOM1.0 / I2S SD0 |
| پین 3 | PA01 — GPIO / SERCOM1.1 / I2S MCK0 |
| پین 4 | PA02 — GPIO / SERCOM1.2 / ADC AIN0 |
| پین 5 | PA03 — GPIO / SERCOM1.3 / ADC AIN1 / DAC VOUT |
| پین 6 | GND — Ground reference |
| پین 7 | PA04 — GPIO / SERCOM0.0 / ADC AIN2 / VREF |
| پین 8 | PA05 — GPIO / SERCOM0.1 / ADC AIN3 |
| پین 9 | PA06 — GPIO / SERCOM0.2 / ADC AIN4 |
| پین 10 | PA07 — GPIO / SERCOM0.3 / ADC AIN5 |
| پین 11 | VDDIN — Voltage regulator input supply |
| پین 12 | PA08 — GPIO / SERCOM2.0 / I2S SDI |
| پین 13 | PA09 — GPIO / SERCOM2.1 / I2S SDO |
| پین 14 | PA10 — GPIO / SERCOM2.2 / I2S FS |
| پین 15 | PA11 — GPIO / SERCOM2.3 / I2S SCK |
| پین 16 | GND — Ground reference |
| پین 17 | PA12 — GPIO / SERCOM4.0 |
| پین 18 | PA13 — GPIO / SERCOM4.1 |
| پین 19 | PA14 — GPIO / SERCOM4.2 / XIN (crystal) |
| پین 20 | PA15 — GPIO / SERCOM4.3 / XOUT (crystal) |
| پین 21 | PA16 — GPIO / SERCOM1.0 / I2C SDA |
| پین 22 | PA17 — GPIO / SERCOM1.1 / I2C SCL |
| پین 23 | PA18 — GPIO / SERCOM1.2 / TC4 |
| پین 24 | PA19 — GPIO / SERCOM1.3 / TC5 |
| پین 25 | PA20 — GPIO / SERCOM5.2 / TC6 |
| پین 26 | PA21 — GPIO / SERCOM5.3 / TC7 |
| پین 27 | PA22 — GPIO / SERCOM3.0 |
| پین 28 | PA23 — GPIO / SERCOM3.1 / USB D- |
| پین 29 | PA24 — GPIO / SERCOM3.2 / USB D+ |
| پین 30 | PA25 — GPIO / SERCOM3.3 |
| پین 31 | GND — Ground reference |
| پین 32 | PB00 — GPIO / SERCOM5.0 / ADC AIN8 |
| پین 33 | PB01 — GPIO / SERCOM5.1 / ADC AIN9 |
| پین 34 | PB02 — GPIO / SERCOM5.2 / ADC AIN10 / TC3 |
| پین 35 | PB03 — GPIO / SERCOM5.3 / ADC AIN11 |
| پین 36 | PB04 — GPIO / SERCOM3.0 / ADC AIN12 |
| پین 37 | PB05 — GPIO / SERCOM3.1 / ADC AIN13 |
| پین 38 | PB06 — GPIO / SERCOM3.2 / ADC AIN14 |
| پین 39 | PB07 — GPIO / SERCOM3.3 / ADC AIN15 |
| پین 40 | PB08 — GPIO / SERCOM4.0 / ADC AIN2 |
| پین 41 | PB09 — GPIO / SERCOM4.1 / ADC AIN3 |
| پین 42 | PB10 — GPIO / SERCOM4.2 / ADC AIN4 |
| پین 43 | PB11 — GPIO / SERCOM4.3 / ADC AIN5 |
| پین 44 | PB12 — GPIO / SERCOM4.0 |
| پین 45 | PB13 — GPIO / SERCOM4.1 |
| پین 46 | PB14 — GPIO / SERCOM4.2 |
| پین 47 | PB15 — GPIO / SERCOM4.3 |
| پین 48 | PB16 — GPIO / SERCOM5.0 |
| پین 49 | PB17 — GPIO / SERCOM5.1 |
| پین 50 | PB18 — GPIO / SERCOM5.2 |
| پین 51 | PB19 — GPIO / SERCOM5.3 |
| پین 52 | PB20 — GPIO / SERCOM3.0 |
| پین 53 | PB21 — GPIO / SERCOM3.1 |
| پین 54 | PB22 — GPIO / SERCOM1.0 |
| پین 55 | PB23 — GPIO / SERCOM1.1 |
| پین 56 | PB24 — GPIO / SERCOM0.0 |
| پین 57 | PB25 — GPIO / SERCOM0.1 |
| پین 58 | PB26 — GPIO / SERCOM2.0 / ETH RMII REF CLK |
| پین 59 | PB27 — GPIO / SERCOM2.1 |
| پین 60 | PB28 — GPIO / SERCOM2.2 |
| پین 61 | PB29 — GPIO / SERCOM2.3 |
| پین 62 | PB30 — GPIO / SERCOM4.0 |
| پین 63 | PB31 — GPIO / SERCOM4.1 |
| پین 64 | PC00 — GPIO / SERCOM6.0 |
| پین 65 | PC01 — GPIO / SERCOM6.1 |
| پین 66 | PC02 — GPIO / SERCOM6.2 |
| پین 67 | PC03 — GPIO / SERCOM6.3 |
| پین 68 | PC04 — GPIO / SERCOM7.0 |
| پین 69 | PC05 — GPIO / SERCOM7.1 |
| پین 70 | PC06 — GPIO / SERCOM6.0 |
| پین 71 | PC07 — GPIO / SERCOM6.1 |
| پین 72 | VDDIO — Digital I/O supply voltage |
| پین 73 | PC08 — GPIO / SERCOM6.2 |
| پین 74 | PC09 — GPIO / SERCOM6.3 |
| پین 75 | PC10 — GPIO / SERCOM7.0 |
| پین 76 | PC11 — GPIO / SERCOM7.1 |
| پین 77 | PC12 — GPIO / SERCOM7.2 |
| پین 78 | PC13 — GPIO / SERCOM7.3 |
| پین 79 | PC14 — GPIO / SERCOM6.0 |
| پین 80 | PC15 — GPIO / SERCOM6.1 |
| پین 81 | PC16 — GPIO / SERCOM6.2 |
| پین 82 | PC17 — GPIO / SERCOM6.3 |
| پین 83 | PC18 — GPIO / SERCOM7.0 |
| پین 84 | PC19 — GPIO / SERCOM7.1 |
| پین 85 | PC20 — GPIO / SERCOM7.2 |
| پین 86 | PC21 — GPIO / SERCOM7.3 |
| پین 87 | PC22 — GPIO / SERCOM3.0 |
| پین 88 | PC23 — GPIO / SERCOM3.1 |
| پین 89 | PC24 — GPIO / SERCOM0.0 |
| پین 90 | PC25 — GPIO / SERCOM0.1 |
| پین 91 | PC26 — GPIO / SERCOM0.2 |
| پین 92 | PC27 — GPIO / SERCOM0.3 |
| پین 93 | PC28 — GPIO / SERCOM1.0 |
| پین 94 | PC29 — GPIO / SERCOM1.1 |
| پین 95 | PC30 — GPIO / SERCOM1.2 |
| پین 96 | PC31 — GPIO / SERCOM1.3 |
| پین 97 | PD00 — GPIO / SERCOM7.0 / ETH CRS DV |
| پین 98 | PD01 — GPIO / SERCOM7.1 / ETH RXD0 |
| پین 99 | GND — Ground reference |
| پین 100 | PD02 — GPIO / SERCOM7.2 / ETH RXD1 |
| پین 101 | PD03 — GPIO / SERCOM7.3 / ETH RXER |
| پین 102 | PD04 — GPIO / SERCOM5.0 / ETH TXD0 |
| پین 103 | PD05 — GPIO / SERCOM5.1 / ETH TXD1 |
| پین 104 | PD06 — GPIO / SERCOM5.2 / ETH TXEN |
| پین 105 | PD07 — GPIO / SERCOM5.3 / ETH MDIO |
| پین 106 | PD08 — GPIO / SERCOM3.0 / ETH MDC |
| پین 107 | PD09 — GPIO / SERCOM3.1 |
| پین 108 | PD10 — GPIO / SERCOM3.2 |
| پین 109 | PD11 — GPIO / SERCOM3.3 |
| پین 110 | PD12 — GPIO / SERCOM1.0 |
| پین 111 | PD13 — GPIO / SERCOM1.1 |
| پین 112 | VDDIO — Digital I/O supply voltage |
| پین 113 | GND — Ground reference |
| پین 114 | AVDD — Analog supply voltage (filtered from VDDIO) |
| پین 115 | VREF — ADC voltage reference |
| پین 116 | PD14 — GPIO / SERCOM1.2 |
| پین 117 | PD15 — GPIO / SERCOM1.3 |
| پین 118 | PD16 — GPIO / SERCOM0.0 |
| پین 119 | PD17 — GPIO / SERCOM0.1 |
| پین 120 | PD18 — GPIO / SERCOM0.2 |
| پین 121 | PD19 — GPIO / SERCOM0.3 |
| پین 122 | PD20 — GPIO / SERCOM7.0 |
| پین 123 | PD21 — GPIO / SERCOM7.1 |
| پین 124 | PD22 — GPIO / SERCOM7.2 / CAN0 TX |
| پین 125 | PD23 — GPIO / SERCOM7.3 / CAN0 RX |
| پین 126 | PD24 — GPIO / SERCOM3.0 / CAN1 TX |
| پین 127 | PD25 — GPIO / SERCOM3.1 / CAN1 RX |
| پین 128 | RESET — Active-low reset input |
کاربردهای معمول
ATSAME54P20A-AF مناسب است برای 6 کاربردs: Industrial Ethernet Gateway, Automotive Body and Chassis ECU, Building Automation Controller, Smart Energy / Solar Inverter Control, HMI Panel with TFT Display, Industrial Sensor Hub with Edge Processing.
Industrial Ethernet Gateway
The ATSAME54P20A-AF integrates a 10/100 Ethernet MAC with IEEE 1588 PTP support, making it ideal for industrial Ethernet gateways bridging PROFINET, EtherCAT, or Modbus TCP networks. Its 120 MHz Cortex-M4F core executes protocol stacks deterministically with sub-millisecond cycle times. The dual CAN-FD controllers allow direct bridging to industrial CAN networks (CANopen, J1939) without an external bridge IC. The 1 MB Flash holds full TCP/IP stacks plus application logic, while 256 KB SRAM supports large socket buffers. Pair the MCU with an external 100BASE-TX PHY such as the LAN8720A or DP83826 via RMII. The 128-pin TQFP package exposes all required RMII signals.
پیشنهادی
Automotive Body and Chassis ECU
The ATSAME54P20A-AF suits automotive body and chassis ECUs thanks to its extended -40 C to +125 C temperature range, dual CAN-FD interfaces, and ARM TrustZone-M for secure boot. CAN-FD supports payloads up to 64 bytes at 5 Mbps, exceeding classical CAN throughput for modern body controllers. The 12-bit 1 Msps ADC samples multiple sensor inputs (pedal position, throttle body, ride-height sensors) with simultaneous sampling. TrustZone-M isolates diagnostic services from the application firmware. The 128-pin TQFP package supports automotive PCB reflow profiles up to 260 C peak per IPC JEDEC J-STD-020. ECC on Flash and SRAM supports functional-safety designs targeting ISO 26262.
پیشنهادی
Building Automation Controller
For building automation, the ATSAME54P20A-AF provides Ethernet for BACnet/IP or KNXnet/IP communication, USB for local HMI panels, and SERCOM ports for RS-485 Modbus RTU to HVAC actuators. The Cortex-M4F core at 120 MHz runs scheduling logic and control loops for HVAC, lighting, and access control subsystems. The 12-bit ADC reads temperature, humidity, and CO2 sensors with 1 Msps throughput, supporting 50+ sensor channels via the external analog mux. The dual CAN-FD buses connect to elevator controllers and security panels. Operating voltage down to 1.71 V allows battery-backed operation during power loss.
پیشنهادی
Smart Energy / Solar Inverter Control
The ATSAME54P20A-AF's combination of Ethernet, dual CAN-FD, 12-bit ADC, and FPU makes it suitable for solar inverter MPPT control and grid-tie synchronization. The Cortex-M4F FPU accelerates sinusoidal PWM calculations and FFT-based grid harmonic analysis at 120 MHz. Dual CAN-FD allows communication with battery management systems and external sensors. The Ethernet MAC supports Modbus TCP for SCADA integration. ECC memory supports long-life deployment (15+ years) required for solar installations. The 128-pin TQFP provides sufficient GPIO for parallel inverter bridge control.
پیشنهادی
HMI Panel with TFT Display
The ATSAME54P20A-AF drives small to mid-sized TFT HMI panels via its parallel display interface and 2D graphics accelerator. The 1 MB Flash stores full graphical assets (icons, fonts, multi-language strings), while 256 KB SRAM supports frame buffers for QVGA/WQVGA displays. The Cortex-M4F at 120 MHz handles touch event processing, animation, and serial protocol stacks (Modbus RTU, CANopen). USB Full-Speed allows firmware updates from a USB stick. The 128-pin TQFP provides up to 99 GPIO pins for display data, touch sensing, and backlight control. TrustZone-M isolates the boot loader from the application image.
پیشنهادی
Industrial Sensor Hub with Edge Processing
The ATSAME54P20A-AF functions as an industrial edge sensor hub, aggregating data from multiple Modbus RTU slaves and publishing it via MQTT over Ethernet. The 12-bit ADC at 1 Msps supports high-speed vibration analysis for predictive maintenance on pumps, fans, and motors. The dual CAN-FD interfaces bridge to CANopen and J1939 sensor networks. Cortex-M4F DSP extensions run FFT and filter chains directly on chip, reducing data uplink bandwidth. ECC memory detects bit flips common in harsh industrial EMI environments. The 128-pin TQFP package handles the industrial -40 C to +125 C range.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای ATSAME54P20A-AF — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | ATSAME54P19A-AF | ATSAME54P20A-AFT | ATSAME54P20A-AUT | ATSAME54P19A-AU | ATSAME54N19A-AF | ATSAME53P20A-AF |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 128-TQFP (14x14) | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same | 128-TQFP (14x14) - same |
| Core | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz | ARM Cortex-M4F 120 MHz |
| Flash | 1 MB | 512 KB | 1 MB | 1 MB | 512 KB | 512 KB | 1 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Ethernet MAC | Yes (10/100 with IEEE 1588) | Yes (10/100 with IEEE 1588) | Yes (10/100 with IEEE 1588) | Yes (10/100 with IEEE 1588) | Yes (10/100 with IEEE 1588) | Yes (10/100 with IEEE 1588) | No |
| CAN-FD | Dual CAN-FD | Dual CAN-FD | Dual CAN-FD | Dual CAN-FD | Dual CAN-FD | Dual CAN-FD | Dual CAN-FD |
| Operating Temperature | -40 C to +125 C (Extended) | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +85 C (Industrial) | -40 C to +125 C | -40 C to +125 C |
| TrustZone-M | Yes | Yes | Yes | Yes | Yes | Yes | No |
تفاوت‌های کلیدی
- Integrated 10/100 Ethernet MAC with IEEE 1588 PTP (در مقابلATSAME53P20A-AF)
- TrustZone-M security extension (در مقابلATSAME53P20A-AF)
- Extended -40 C to +125 C temperature range (در مقابلATSAME54P19A-AU)
یادداشت‌های طراحی
Decouple every VDDIO and VDDIN pin with a 100 nF ceramic placed within 3 mm of the package, plus one bulk 4.7 uF ceramic shared across the supply rail. The ATSAME54P20A-AF integrates a 1.2V core LDO fed by VDDIN; a 10 uF bulk on the LDO output (pin DEC) is required per the SAM D5x/E5x datasheet. For AVDD, insert a ferrite bead between VDDIO and AVDD to keep ADC noise below 1 LSB.
Route the RMII Ethernet signals (REF_CLK, CRS_DV, RXD[1:0], TXD[1:0], TXEN, MDC, MDIO) with controlled impedance of 50 ohm and length-matched within 50 mils to preserve timing. Place the external 25 MHz crystal within 5 mm of XIN/XOUT (PA14/PA15) with a grounded guard ring. Use a 4-layer PCB with a continuous ground plane under the MCU; the exposed pad of the TQFP is a thermal pad and must be soldered to the PCB for proper thermal dissipation.
The 12-bit ADC achieves best ENOB when the analog input bandwidth is limited to 1.5 MHz (Nyquist for 1 Msps). Add a 1 kohm / 100 pF RC filter at the analog input pin to attenuate broadband noise. Use ADCn reference buffer in 1.2V mode for best linearity; if using external reference, source it from a low-noise LDO such as MCP1501. TrustZone-M secure boot requires the BOOTPROT fuse set and the secure bootloader image signed with the customer's private key.
Do not leave the SAM E54 in reset with floating I/O during boot - configure unused pins as input with pull-up enabled to avoid current leakage. When using CAN-FD, ensure the transceiver's dominant timeout is disabled for proper FD frame handling. For Ethernet applications, the RMII PHY must be configured for 50 MHz reference clock output when supplying the clock from the MCU, otherwise link establishment fails silently.
اطلاعات انطباق
RoHS and REACH compliant per Microchip product page. Industrial extended temperature (-40 C to +125 C) supports AEC-Q100 environmental stress grades but the part is not formally AEC-Q100 qualified - check with Microchip for automotive-grade part numbers.