ATSAMS70Q21B-CN - 300MHz Cortex-M7 2MB MCU | Microchip
MPN: ATSAMS70Q21B-CN ✓ فعالATSAMS70Q21B-CN نمای کلی
A flash microcontroller is a microcontroller that stores its application program in embedded nonvolatile flash memory rather than requiring an external memory device. Within the device hierarchy, the ATSAMS70Q21B-CN sits at the MCU level, uses the ARM Cortex-M7 processor core, and combines the core with memory, clock, communications, analog, and timer peripherals in one integrated package.
The principal advantages of this device are its 300 MHz processing rate, 2 MB flash configuration, 384 KB SRAM, and 144-pin LFBGA integration. The Cortex-M7 architecture includes a floating point unit, while the large SRAM capacity supports buffering, graphics, protocol stacks, and real-time data processing without relying on external memory for working data. The manufacturer product page confirms operation up to 300 MHz and flash capacity up to 2048 KB.
The S70Q21 family is designed for embedded applications that need more processing headroom than typical Cortex-M0 or Cortex-M4 devices. Its combination of high clock speed, SRAM, flash, and a dense package supports control loops, communications gateways, human-machine interfaces, and test equipment. The exact peripheral configuration, electrical limits, operating-temperature grades, and interface mix should be confirmed in the manufacturer data sheet for the specific package variant before schematic capture.
Typical uses include industrial automation controllers, Ethernet-connected equipment, motor-control systems, instrumentation, and high-speed data acquisition. Because the LFBGA package requires dense PCB routing and controlled thermal design, it is most appropriate for multilayer boards with a defined land pattern and established assembly process rather than prototype boards with limited routing density.
The primary design consideration is package-level complexity: a 144-pin LFBGA has a small 0.5 mm-class ball pitch and leaves little routing tolerance. Use the manufacturer land pattern, place decoupling capacitors close to supply pins, maintain the recommended layer-stack and via rules, and validate assembly capability with the chosen board fabricator. Confirm the exact pin functions in the pin-description table before assigning nets.
This page organizes the core S70Q21 specifications, same-footprint alternatives, and practical design guidance in one engineering-focused reference. It helps designers evaluate processor performance, memory capacity, package constraints, and migration options before committing the ATSAMS70Q21B-CN to a new design.
جایگزینهای drop-in برای ATSAMS70Q21B-CN — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ATSAMS70Q21B-CN (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Mounting Type, Processor Core, Product Type, Flash Memory.
ATSAME70Q21B-CN
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAMS70Q21B-CFNT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATSAMS70Q21B-CFN
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATSAMS70Q21A-CN
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATSAMS70Q21A-CFN
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATSAMS70Q21A-CFNT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATSAMS70Q21B-CN حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Processor Core | ARM Cortex-M7 |
| حداکثر فرکانس کلاک | 300 MHz |
| Flash Memory | 2 MB (2048 KB) |
| SRAM | 384 KB |
| Architecture | 32-bit |
| Floating Point Unit | Yes, single-precision FPU |
| بستهبندی | 144-pin LFBGA, 10 mm x 10 mm |
| نوع نصب | Surface mount |
| Manufacturer Product Family | SAM S70Q21 |
| Program Memory Organization | 2M x 8 |
راهنمای پیکربندی پین ATSAMS70Q21B-CN 144-pin lfbga, 10 mm x 10 mm
پیکربندی پین برای ATSAMS70Q21B-CN (پکیج 144-pin lfbga, 10 mm x 10 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATSAMS70Q21B-CN.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATSAMS70Q21B-CN مناسب است برای 6 کاربردs: Industrial Automation and Motion Control, Connected Industrial Gateway, High-Speed Data Acquisition, Test and Measurement Equipment, Human-Machine Interface and Graphics, Secure Equipment Controller.
Industrial Automation and Motion Control
The ATSAMS70Q21B-CN fits industrial controllers that must execute real-time control logic while also handling communications and data management. Its 300 MHz Cortex-M7 core and single-precision floating point unit provide computational headroom for filtering, transformations, and proportional control calculations, while 384 KB of SRAM supports working buffers without forcing frequent external-memory access. The device can coordinate timers, communication peripherals, and control outputs on one platform. For motion systems, place input and output interfaces away from high-current switching paths, use the manufacturer reference layout, and validate control-loop latency under the final clock configuration.
پیشنهادی
Connected Industrial Gateway
The ATSAMS70Q21B-CN is suitable for an industrial gateway that must aggregate fieldbus traffic, maintain protocol stacks, and forward data to a higher-level network. The 384 KB of SRAM allows multiple buffers and protocol contexts to remain active, while 2 MB of flash provides room for networking code, security services, diagnostics, and configuration storage. At 300 MHz, the device can service multiple tasks without moving every packet through an external processor. Keep high-speed interfaces separated from analog inputs, follow the reference ground and power layout, and test sustained traffic with the exact Ethernet or fieldbus configuration used in production.
پیشنهادی
High-Speed Data Acquisition
The ATSAMS70Q21B-CN can serve as the central controller in a high-speed acquisition system where sampling control, buffering, and real-time processing must occur concurrently. Its 300 MHz Cortex-M7 core supports efficient digital signal processing, and 384 KB of SRAM can hold multiple sample buffers while data is transferred over a high-speed serial interface. The floating point unit is useful when scaling, filtering, or transforming acquired values. Place analog front-end circuitry away from the digital processor and switching supplies, use short return paths, and validate the complete signal chain with the intended sampling rate and gain settings.
پیشنهادی
Test and Measurement Equipment
The ATSAMS70Q21B-CN is well suited to automated test equipment that combines instrument control, numerical processing, and operator communications. The 300 MHz core can execute measurement sequencing and compensation algorithms, while 2 MB of flash accommodates firmware, calibration tables, and communication protocols. The 384 KB of SRAM reduces the need for external memory during transient acquisition or report generation. For sensitive measurements, maintain separate analog and digital power domains, keep return currents away from reference nodes, and validate input leakage, timing, and grounding with the complete instrument enclosure rather than only the bare PCB.
پیشنهادی
Human-Machine Interface and Graphics
The ATSAMS70Q21B-CN can act as the processing center for a graphical human-machine interface because its 300 MHz Cortex-M7 core and 384 KB of SRAM support display updates, touch handling, and interface state management. The 2 MB flash capacity provides room for graphics resources, fonts, localization data, and application firmware. External display and interface controllers can communicate through serial links while the processor manages state and user input. Because the LFBGA footprint limits escape routing, plan display interfaces on the least congested board layers, provide local decoupling at every supply entry, and check the assembled board for hidden routing changes under temperature and vibration conditions.
پیشنهادی
Secure Equipment Controller
The ATSAMS70Q21B-CN is appropriate for an equipment controller that must coordinate secure communications, local user interaction, and real-time supervisory functions. Its 2 MB of internal flash supports firmware layers and authenticated data structures, while the 384 KB SRAM accommodates protocol state and message buffers. The Cortex-M7 architecture and floating point unit also allow the controller to combine security processing with application tasks without relying on a separate microcontroller. Keep boot and debug interfaces controlled during production, isolate sensitive traces where practical, follow the power and decoupling recommendations in the package documentation, and confirm the security peripheral configuration for the exact ordering code.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ATSAMS70Q21B-CN — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ATSAME70Q21B-CN | ATSAMS70Q21B-CFNT | ATSAMS70Q21B-CFN | ATSAMS70Q21A-CN | ATSAMS70Q21A-CFN | ATSAMS70Q21A-CFNT |
|---|---|---|---|---|---|---|---|
| Package | 144-LFBGA (10x10) | 144-LFBGA (10x10) | 144-LFBGA (10x10) | 144-LFBGA (10x10) | 144-LFBGA (10x10) | 144-LFBGA (10x10) | 144-LFBGA (10x10) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum Clock Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| SRAM | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB |
| Floating Point Unit | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Device Family | SAM S70 | SAM E70 | SAM S70 | SAM S70 | SAM S70 | SAM S70 | SAM S70 |
| Peripheral Configuration | S70Q21 configuration | E70Q21 configuration; verify ball-level peripheral differences | S70Q21 family configuration; verify ordering-code differences | S70Q21 family configuration; verify ordering-code differences | Revision A S70Q21 configuration | Revision A S70Q21 configuration | Revision A S70Q21 configuration |
تفاوتهای کلیدی
- Higher processing performance within the compared S70Q21 alternatives (در مقابلATSAMS70Q21A-CN)
- Processor and memory configuration matches the closest listed E70 migration path (در مقابلATSAME70Q21B-CN)
- S70 family functional continuity for S70-specific peripheral designs (در مقابلATSAME70Q21B-CN)
- Substantial on-chip working memory for real-time embedded processing (در مقابلATSAMS70Q21A-CFNT)
یادداشتهای طراحی
Treat the 144-pin LFBGA as a high-density routing problem. Use the manufacturer land pattern and recommended board stack, preserve short return paths for every supply connection, and place decoupling capacitance directly at the relevant package balls. Avoid routing high-speed signals beneath the device unless the stackup and reference design explicitly support that configuration. Validate pad-to-pad transition density and via-in-pad requirements with the assembly house before release.
Partition analog and digital supply paths so switching-current noise does not flow through sensitive reference or measurement returns. Verify each supply's voltage, decoupling value, startup requirement, and permissible load current in the exact device documentation. Because no supply-voltage specification appears on the distributor listing, do not derive a rail value from generic S70 family assumptions; confirm it before schematic and power-tree approval.
The 300 MHz processor and dense LFBGA can create localized thermal loading even when the average board temperature appears acceptable. Follow the manufacturer's thermal layout guidance, provide adequate inner-layer copper, and consider thermal vias where the land pattern permits them. Validate the hottest operating case with the intended enclosure, airflow, ambient temperature, and programmed clock because laboratory results without the final enclosure can be optimistic.
Do not treat a matching Cortex-M7 core, flash size, or BGA outline as proof of drop-in compatibility. Before substitution, compare the complete 144-ball assignment, power pins, debug signals, clock inputs, boot configuration, and every populated communication or analog peripheral. The ATSAME70Q21B-CN is the closest listed migration candidate, but firmware and board-level validation remain necessary before production release.
اطلاعات انطباق
The exact ordering code's material-compliance and automotive-qualification declarations must be confirmed in Microchip's current product documentation.