ATTINY11-6SC 6MHz 1KB AVR MCU 8-SOIC | Microchip
MPN: ATTINY11-6SC ✗ پایان تولیدATTINY11-6SC نمای کلی
An 8-bit AVR microcontroller is a compact embedded processor that combines a CPU core, program memory, data memory, I/O ports, and dedicated peripherals on one integrated circuit. The ATTINY family belongs to the TinyAVR segment of the AVR product line, where small program memory and a low pin count support straightforward control functions rather than complex application processing. The ATTINY11-6SC operates at up to 6MHz and stores 1KB of Flash as 512 words of 16-bit program instructions.
Key specifications include 1KB of Flash program memory, 6MHz maximum clock speed, an 8-bit RISC-based AVR core, 6 I/O lines, and a 4V to 5.5V operating supply range. The device is identified as an 8-SOIC package suitable for surface-mount assembly. Its Watchdog Timer provides a hardware mechanism for recovering from unexpected program-flow or system-lock conditions when enabled in the firmware.
The device is intended for applications where a small controller can manage discrete inputs and outputs without requiring a large processor, high memory capacity, or a complex external interface. The 1KB Flash capacity is suitable for compact control routines, while the 6MHz operating speed supports straightforward timing and I/O handling. The 6 available I/O lines can be assigned to functions such as digital inputs, outputs, or simple peripheral control depending on the device configuration.
Typical uses include small sensor interfaces, relay or switch-control modules, simple timers, LED status indicators, compact consumer accessories, and low-speed embedded control boards. The 8-SOIC package offers a familiar small-outline surface-mount format and is useful where through-hole packaging is not appropriate. Designers should plan their firmware and pin assignments around the limited 1KB program memory and 6 I/O lines.
When laying out a board, follow the manufacturer pin-description table for the exact 8-SOIC footprint and verify the supply decoupling requirements for the selected operating voltage. Because the program memory is limited, use compact firmware, remove unused features, and avoid adding peripheral functions that exceed the available flash and I/O budget.
This page combines the manufacturer-related product identity, technical specifications, package information, comparison context, and practical design guidance for engineers evaluating the ATTINY11-6SC in compact embedded systems.
جایگزینهای drop-in برای ATTINY11-6SC — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ATTINY11-6SC (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Architecture, Device Type, Flash Memory.
ATTINY11-6SU
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATTINY11-6SI
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATTINY11L-2SC
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATTINY11L-2SU
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATTINY13-20SU
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATTINY11-6SC حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 8-bit AVR ATtiny microcontroller |
| Core Architecture | AVR 8-bit RISC |
| Maximum Operating Speed | 6 MHz |
| Flash Program Memory | 1 KB (512 x 16) |
| Number of I/O Lines | 6 |
| Supply Voltage Range | 4 V to 5.5 V |
| بستهبندی | 8-SOIC |
| نوع نصب | Surface Mount |
| Device Type | MCU |
| Series | ATtiny |
| Architecture | 8-bit |
| Program Memory Organization | 512 x 16 |
| Watchdog Timer | Yes |
راهنمای پیکربندی پین ATTINY11-6SC 8-soic
پیکربندی پین برای ATTINY11-6SC (پکیج 8-soic). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATTINY11-6SC.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATTINY11-6SC مناسب است برای 6 کاربردs: Compact Sensor Interface, Relay and Switch Control, LED Status and Indicator Control, Low-Speed Timing Module, Simple Consumer Accessory, Industrial Discrete Control.
Compact Sensor Interface
The ATTINY11-6SC is suitable for a small embedded sensor interface where the controller reads a limited number of digital inputs and translates them into control outputs. Its 6 I/O lines provide a practical pin budget for sensors, indicators, and logic signals, while the 6MHz AVR core handles straightforward sampling and state management. The 1KB Flash memory suits compact firmware rather than feature-heavy data processing. The device operates from 4V to 5.5V, which aligns with common 5V sensor systems. A designer should reserve pins for programming and confirm the exact pin functions in the manufacturer datasheet before finalizing the connector and protection scheme.
پیشنهادی
Relay and Switch Control
A relay, switch, or latch-control module can use the ATTINY11-6SC to implement timed and conditional activation logic. The six I/O lines are suitable for driving a limited number of discrete control outputs and reading basic status inputs, while the 6MHz operating speed provides more than enough processing capability for deterministic control routines. The 4V to 5.5V supply range is compatible with 5V control boards. Because relay coils and other inductive loads can inject transients, the implementation should include appropriate driver and suppression components, while the small 1KB memory budget encourages a compact, purpose-specific firmware design.
پیشنهادی
LED Status and Indicator Control
The ATTINY11-6SC can drive LED indicators, status lamps, or simple visual annunciators in a compact control panel. The six available I/O lines allow multiple indicator outputs to be assigned without requiring a larger microcontroller, and the 6MHz AVR core supports straightforward timing and debouncing routines. The device's 1KB Flash capacity is appropriate for a limited state machine or fixed pattern generator rather than complex graphics or communications. A 4V to 5.5V operating range supports common 5V indicator circuitry. Firmware should keep output states defined during reset and startup, and the board should use current-limiting resistors or a suitable LED driver arrangement.
پیشنهادی
Low-Speed Timing Module
The ATTINY11-6SC can form the core of a compact timer or delayed-output module for appliances, instruments, and simple embedded accessories. Its 6MHz operating speed is sufficient for timing loops, task scheduling, and debounce logic, while the limited I/O count keeps the design focused on a small number of external signals. The Watchdog Timer provides a useful recovery mechanism for unattended operation when enabled in software. The 1KB Flash limit means timing logic should avoid unnecessary abstractions and large lookup tables. The 4V to 5.5V supply requirement should be checked against the module's power architecture, and the exact timer peripherals and oscillator requirements should be confirmed in the manufacturer documentation.
پیشنهادی
Simple Consumer Accessory
The ATTINY11-6SC is appropriate for a simple consumer accessory that needs a few button inputs, one or more output controls, and minimal autonomous behavior. The 8-SOIC package provides a small surface-mount footprint, while the 6 I/O lines can handle the limited interaction required by a dedicated accessory. Its 6MHz AVR core and 1KB Flash memory are aligned with firmware that reads switches, drives indicators, and executes a small state machine. The 4V to 5.5V supply range can simplify integration with a 5V accessory rail. Product developers should keep firmware upgrade paths practical, document the programming interface, and verify environmental requirements against the manufacturer datasheet.
پیشنهادی
Industrial Discrete Control
The ATTINY11-6SC can be used in a compact industrial control module for basic discrete automation where the required logic is limited to a handful of inputs and outputs. The six I/O lines and 6MHz processing speed are adequate for interlocks, sequence steps, status monitoring, and basic machine-interface logic. Its 4V to 5.5V supply range requires careful selection of the board-level power source, while the Watchdog Timer can help restart the control function after a software fault. Industrial implementation should verify EMC, isolation, transient protection, and environmental requirements rather than assuming consumer-board suitability. The limited 1KB Flash memory also favors simple, deterministic control code.
پیشنهادی
دادههای مرجع مهندسی برای ATTINY11-6SC — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ATTINY11-6SU | ATTINY11-6SI | ATTINY11L-2SC | ATTINY11L-2SU | ATTINY13-20SU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Maximum Operating Speed | 6 MHz | 6 MHz | 6 MHz | 2 MHz | 2 MHz | 20 MHz |
تفاوتهای کلیدی
- 6MHz operating speed in an 8-pin AVR controller (در مقابلATTINY11L-2SC)
- 6MHz speed with the same compact SOIC footprint (در مقابلATTINY11L-2SU)
- Compact 1KB Flash and six-I/O configuration (در مقابلATTINY13-20SU)
یادداشتهای طراحی
Design the ATTINY11-6SC supply around the stated 4V to 5.5V operating range. Place the required input and output bypass capacitors close to the device pins, and use short, low-impedance supply routing so switching noise does not disturb the AVR core. Confirm the final capacitor values, startup behavior, and regulator headroom in the manufacturer datasheet rather than relying on generic values.
Use the manufacturer 8-SOIC pin-description table for every footprint and programming connection. Keep the footprint, pin-1 orientation, ground connections, and decoupling layout consistent with the package drawing. Because the MCU has only 6 I/O lines, reserve the programming interface early in the schematic and avoid consuming those pins with functions that cannot be reassigned.
Treat the 1KB Flash limit as a firmware-design constraint. Avoid large frameworks, verbose error strings, and unused peripheral initialization that can consume the program budget quickly. Also define the behavior of external outputs during reset and power-up, and confirm the Watchdog Timer reset behavior before enabling it in a product that controls relays or other energized hardware.
For designs using the Watchdog Timer, maintain deterministic reset and fault-recovery behavior in firmware and verify the effect of an unexpected reset on external actuators. Keep programming and debug access reachable, and separate sensitive analog or timing paths from digital switching nodes. The device's small 6MHz speed and limited I/O count favor a straightforward layout with short, deliberate signal routes.
اطلاعات انطباق
The manufacturer and distributor listings identify the device and its core specifications, but the retrieved data does not state the requested compliance certifications.