Microchip Technology

ATTINY45-20MU - 20MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY45-20MU ✓ فعال
20-QFN-EP (4 x 4 mm) Package 20 MHz Speed 4 KB (2K x 16 bits) Memory
حداقل سفارش: 1 |

ATTINY45-20MU نمای کلی

The Microchip Technology ATTINY45-20MU is an 8-bit AVR RISC microcontroller with a 20 MHz maximum clock, 4 KB of in-system-programmable Flash, 256 bytes of EEPROM, and 256 bytes of SRAM in a 20-QFN-EP package measuring 4 x 4 mm. The device provides six general-purpose I/O lines and is positioned for compact, low-power embedded control.

An 8-bit AVR microcontroller is a programmable system-on-chip that combines a RISC processor core, nonvolatile Flash program memory, data EEPROM, SRAM, timers, and I/O peripherals in one integrated circuit. Within the product hierarchy, the ATTINY45 belongs to Microchip’s ATtiny family, using the AVR architecture for efficient embedded processing. Its compact memory footprint suits small control tasks that require deterministic firmware execution without a larger external microcontroller.

Key capabilities include 4 KB of Flash organized as 2K x 16 bits, 256 bytes of EEPROM, 256 bytes of SRAM, 32 general-purpose working registers, and six general-purpose I/O lines. The 20 MHz operating speed supports responsive control loops and time-sensitive peripheral handling. The 20-QFN-EP package includes an exposed thermal pad and surface-mount construction for space-constrained PCB layouts.

The AVR architecture combines a reduced-instruction-set computer core with dedicated timer/counter and serial-interface functions. On-chip Flash supports in-system programming, allowing firmware to be programmed after the device is mounted on a PCB. The microcontroller also supports in-circuit serial programming through dedicated programming signals, reducing manufacturing and service complexity for compact assemblies.

Typical uses include small sensor nodes, simple actuator controllers, compact embedded instruments, lighting controls, and low-cost hobbyist platforms. The six-I/O configuration is appropriate when external status indicators, buttons, or a small serial interface are required. The limited SRAM and Flash capacity make memory planning essential for buffering, graphics, protocol stacks, and other data-intensive workloads.

Layout planning must account for the exposed pad and its thermal and electrical connection requirements. Place programming access points where they remain reachable after assembly, route sensitive signals away from fast-switching nodes, and follow the manufacturer’s land-pattern and decoupling guidance. Confirm the exact pin functions and alternate-function matrix against the manufacturer datasheet before assigning PCB tracks.

This product page combines the manufacturer’s device overview, exact orderable-part parameters, packaging information, pricing references, and application-focused engineering guidance. It also identifies same-footprint family options and distinguishes true drop-in choices from alternatives that require different memory, speed, package, or programming arrangements.

جایگزین‌های drop-in برای ATTINY45-20MU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATTINY45-20MU (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Flash Memory, Package, SRAM, Architecture, EEPROM.

Microchip Technology
Flash Memory: 4 KB in-system programmable Flash
Package: 20-pin QFN/MLF, 4 x 4 mm
SRAM: 256 B
مقایسه با ATTINY45-20MU →
Microchip Technology
Flash Memory: 8 KB (4K x 16 words)
Package: 20-pin QFN with exposed pad (4 x 4 mm)
SRAM: 512 bytes
مقایسه با ATTINY45-20MU →

ATTINY85-20MU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Microchip Technology
📦 20-QFN-EP (4 x 4 mm)
AVR ATtiny 8-bit microcontroller · 20 MHz · 8 KB (4K x 16 words) · 512 bytes · 512 bytes · 10 bits · 5 V · 3.3 V to 5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATTINY44A-MUR

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Microchip Technology
📦 20-QFN-EP (4 x 4 mm)
8-bit RISC-based AVR microcontroller · ATtiny44A TinyAVR · 20 MHz · 4 KB in-system programmable Flash · 256 B · 256 B · 12 · 32

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATTINY45-20MU حداکثر مقادیر مجاز و مشخصات الکتریکی

Microcontroller Type 8-bit AVR RISC-based microcontroller
حداکثر فرکانس کلاک 20 MHz
Flash Memory 4 KB (2K x 16 bits)
EEPROM Memory 256 bytes
SRAM 256 bytes
General-Purpose I/O Lines 6 lines
General-Purpose Working Registers 32 registers
Timer/Counters 1 timer/counter with compare modes
Program Memory Type In-system programmable Flash
بسته‌بندی 20-QFN-EP (4 x 4 mm)
نوع نصب Surface mount
Architecture AVR 8-bit RISC
Programming Interface In-circuit serial programming (ICSP)

راهنمای پیکربندی پین ATTINY45-20MU 20-qfn-ep (4 x 4 mm)

پیکربندی پین برای ATTINY45-20MU (پکیج 20-qfn-ep (4 x 4 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 20-qfn-ep (4 x 4 mm) برای ATTINY45-20MU

داده پین‌آوت تفصیلی موجود نیست برای ATTINY45-20MU.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATTINY45-20MU مناسب است برای 6 کاربردs: Compact Sensor Node, Low-Power Actuator Controller, Programmable LED Indicator, Small Embedded Instrument, Battery-Powered Remote Control, Programming and Debug Adapter.

🧩

Compact Sensor Node

The ATTINY45-20MU fits compact sensor nodes because it combines a 20 MHz AVR processor, 4 KB of programmable Flash, 256 bytes of EEPROM, and six general-purpose I/O lines in a 4 x 4 mm 20-QFN-EP package. The microcontroller can sample a simple sensor, apply threshold logic, and report status through a low-speed serial interface. Its six I/O lines support sensors, indicators, and a programming or communications interface without requiring a larger pin count. The principal design constraint is SRAM: 256 bytes must accommodate the stack, buffers, and application variables, so sampled data should usually be processed immediately rather than accumulated in a large local array.

🏭

Low-Power Actuator Controller

The ATTINY45-20MU can control a small relay, solenoid, valve, or motor driver when the firmware must coordinate timing and input conditions within a limited footprint. Its 20 MHz clock provides useful response margin for debouncing, pulse-width control, and state-machine updates, while 32 working registers help organize the control task. Six I/O lines allow connection of command inputs, status LEDs, and actuator drive signals. Because the MCU does not directly regulate large inductive loads, the external driver must include appropriate current limiting, flyback protection, and electrical isolation from the sensitive control circuit.

💡

Programmable LED Indicator

The ATTINY45-20MU is appropriate for programmable LED indicators that require multiple blinking patterns, button-driven modes, or status sequencing without a larger control platform. Six general-purpose I/O lines can support several indicator channels and user inputs, while the 20 MHz operating rate comfortably handles software timing and nonblocking state updates. The 4 KB Flash capacity is sufficient for compact pattern tables and straightforward control logic. When driving LEDs, include the intended current-limiting method and place the devices so switching edges do not compromise sensitive analog or programming nets.

🔧

Small Embedded Instrument

The ATTINY45-20MU can serve as the control processor in a small embedded instrument that measures a limited analog quantity and operates a simple user interface. Its 20 MHz AVR core can execute sampling sequences, calibration logic, display updates, and button handling, while the 4 KB Flash and 256-byte SRAM keep the firmware footprint compact. The six-I/O arrangement is suitable for a display control, buttons, an indicator, and a serial or programming connection. Designers should account for the limited SRAM and avoid allocating large display buffers when direct output or incremental rendering would preserve the available memory.

📱

Battery-Powered Remote Control

The ATTINY45-20MU is well suited to a small battery-powered remote because the 20-QFN-EP footprint minimizes board area and the device provides the core resources needed for button decoding, command encoding, and low-power state management. Six I/O lines are adequate for a small keypad, wake input, and status feedback, while 256 bytes of EEPROM can preserve selected settings or calibration values. A sleep-mode design can reduce average consumption, but the final operating-current figure and wake-up behavior must be established from the manufacturer electrical data. The exact 20 MHz grade also leaves performance margin for simple debouncing and low-power transitions.

🖥️

Programming and Debug Adapter

The ATTINY45-20MU can act as the target controller in a compact programming or debug adapter built around the AVR ICSP workflow. Its 20 MHz clock supports responsive command parsing and firmware verification, while six I/O lines can expose programming status, user-control inputs, and indicators. The 4 KB Flash limit is important for adapters that implement protocol conversion or buffering; a same-package ATtiny85 variant is preferable when code size becomes restrictive. Regardless of the application, preserve unobstructed access to the programming interface and verify reset timing so the programmer can reliably enter programming mode.

What are the key specifications of ATTINY45-20MU that engineers should know?
The ATTINY45-20MU is a compact 8-bit AVR microcontroller rated for operation up to 20 MHz, with 4 KB of Flash, 256 bytes of EEPROM, 256 bytes of SRAM, and six general-purpose I/O lines. According to the Microchip ATtiny45 product page, it also includes 32 working registers and one timer/counter with compare modes. The device is packaged in a 4 x 4 mm 20-QFN-EP surface-mount package, making it suitable for small embedded-control boards.
Where can I find the ATTINY45 pinout?
The ATTINY45 pinout is found in the pin-description section of the manufacturer ATtiny45 documentation. The ATTINY45-20MU uses a 20-QFN-EP package, so its footprint includes twenty perimeter terminals and an exposed thermal pad. Use the package land pattern and pin-description table when assigning tracks because several I/O pins can support alternate peripheral functions. The exposed pad also requires the recommended electrical and thermal connection treatment.
Where can I download the ATTINY45-20MU datasheet PDF?
The official ATtiny45-20MU technical documentation is available from Microchip’s ATtiny45 product page at https://www.microchip.com/en-us/product/ATtiny45. The manufacturer product page provides the device overview, family resources, programming information, and links to supporting documentation. Use the ordering information to confirm that ATTINY45-20MU is the 20 MHz industrial-temperature variant in the 20-QFN-EP package rather than another speed grade or package.
ATTINY45 vs ATTINY85: which microcontroller should I choose?
Choose the ATTINY45 when 4 KB of Flash is sufficient, while choosing the ATTINY85 provides twice the program memory for more complex firmware. Microchip describes both as members of the compact ATtiny AVR family, and the manufacturer overview identifies the ATTINY45 with 4 KB of ISP Flash, 256 bytes of EEPROM, 256 bytes of SRAM, and six general-purpose I/O lines. The ATTINY85 retains the familiar ATtiny peripheral architecture but increases available program storage.
Can ATTINY45 be programmed with Arduino?
The ATTINY45 can be used with Arduino-compatible open-source programming workflows through an appropriate AVR programmer and bootloader arrangement. Programming normally uses In-Circuit Serial Programming, or ICSP, with the reset and programming signals brought to accessible test points. The exact Arduino board definition and fuse configuration must match the ATTINY45, while the 20-QFN-EP footprint also makes a suitable breakout or adapter board important.
How is ATTINY45-20MU programmed?
The ATTINY45-20MU is programmed through its in-system-programmable Flash using In-Circuit Serial Programming, or ICSP. The programming path uses dedicated programming signals and can be implemented with a standard AVR programmer connected through a 2 x 3 programming header or test points. Microchip’s product overview identifies ICSP as a supported programming method, allowing firmware programming after assembly when the relevant signals remain accessible on the PCB.
Where to buy ATTINY45-20MU online?
Use the Request a Quote form on this page to request ATTINY45-20MU availability, quantity breaks, and delivery information. The exact orderable device is a 20 MHz ATtiny45 in a 20-QFN-EP package, so quotations should identify ATTINY45-20MU clearly and state the desired production quantity. This avoids confusion with the reel-order suffix ATTINY45-20MUR or other ATtiny speed and package variants.
What is the price of ATTINY45-20MU?
Current commercial terms for ATTINY45-20MU are available through the Request a Quote form on this page. Submit the required quantity and packaging preference so the quote can reflect the exact ATTINY45-20MU orderable part rather than a related ATtiny45 variant. The 20 MHz speed grade, 20-QFN-EP package, and exact suffix should remain unchanged to prevent substitution of a device with different electrical or mechanical characteristics.
What is the lead time for ATTINY45-20MU?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with the exact package, order quantity, production schedule, and required delivery destination. The quotation request should specify ATTINY45-20MU, the 20-QFN-EP package, and whether the parts are needed in tray or tape-and-reel presentation so the response reflects the intended production configuration.
Is ATTINY45-20MU in stock?
Check current inventory through the Request a Quote form on this page and provide the required quantity and delivery date. The ATTINY45-20MU is an active catalog configuration with a 4 x 4 mm 20-QFN-EP package, but availability can change by package presentation and order volume. Do not approve a substitution without checking that the quoted part retains the ATTINY45-20MU order code, 20 MHz grade, and exposed-pad footprint.
What can replace ATTINY45-20MU without changing the PCB?
ATTINY85-20MU is the closest same-package upgrade because it retains a 20 MHz AVR rating and the 20-QFN-EP footprint while increasing Flash memory. ATTINY44A-MUR is another Microchip family option listed for the site, but its different device characteristics and reel-order suffix require validation before use. A genuine drop-in replacement must preserve the footprint, power pins, reset behavior, programming interface, clock requirements, and all peripheral assignments used by the PCB.
When should I choose ATTINY45-20MU over ATTINY85-20MU?
Choose ATTINY45-20MU when the application fits within 4 KB of Flash, 256 bytes of EEPROM, and 256 bytes of SRAM. Choose ATTINY85-20MU when firmware growth would exceed the ATTINY45 memory budget or when extra program storage simplifies the implementation. Both devices target compact AVR designs, but the larger memory of the ATtiny85 provides more room for protocol handling, state machines, tables, and future firmware growth.
Is ATTINY45-20MU suitable for a compact sensor controller?
The ATTINY45-20MU is suitable for a compact sensor controller when its six I/O lines and memory resources satisfy the design. It provides six general-purpose I/O lines, 4 KB of Flash, 256 bytes of EEPROM, and 256 bytes of SRAM at up to 20 MHz. Its small 4 x 4 mm package supports dense layouts, but engineers should budget SRAM carefully if the sensor driver buffers samples or maintains communication state.
Can ATTINY45-20MU be used for USB projects?
The ATTINY45 can support projects involving software USB, but the ATTINY45-20MU does not provide a dedicated hardware USB controller. Such designs depend on the AVR software USB implementation and therefore place greater demands on the 20 MHz CPU, Flash, and SRAM budget. Verify the selected USB library, boot configuration, signal timing, and available memory against the manufacturer documentation before committing the very small device to a new USB design.
What is the best Microchip equivalent for ATTINY45-20MU?
ATTINY85-20MU is the closest Microchip family equivalent because it uses the same 20 MHz speed grade and 20-QFN-EP package while providing more Flash memory. It is the appropriate choice when the PCB can accept the larger memory footprint but the installed firmware must remain within the ATTINY85’s limits. Validate peripheral compatibility, fuse settings, timing assumptions, and programming procedures before treating it as a production drop-in replacement.

داده‌های مرجع مهندسی برای ATTINY45-20MU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ATTINY45-20MU for compact embedded-control products whose firmware fits within 4 KB of Flash and whose working data fits within 256 bytes of SRAM. Its six I/O lines are sufficient for modest sensing, actuation, status indication, and programming requirements. Choose ATTINY85-20MU when the PCB footprint may remain unchanged but firmware growth, additional timers, or larger data structures make the ATtiny45 memory budget inadequate. Consider ATTINY44A-MUR when a 24 MHz clock rating and 4 KB Flash are useful, while accounting for its reel-order designation and validating peripheral compatibility. Neither same-package option is automatically a functional substitute: firmware behavior, fuse settings, reset timing, peripheral use, clock requirements, and exposed-pad construction must be reviewed before production approval.

مقایسه با جایگزین‌ها

پارامتر این محصول ATTINY85-20MU ATTINY44A-MUR
Package 20-QFN-EP (4 x 4 mm) 20-QFN-EP (4 x 4 mm) 20-QFN-EP (4 x 4 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz 24 MHz
Flash Memory 4 KB 8 KB 4 KB
EEPROM Memory 256 bytes 256 bytes 256 bytes
SRAM 256 bytes 256 bytes 256 bytes
General-Purpose I/O Lines 6 lines 6 lines 6 lines
General-Purpose Working Registers 32 registers 32 registers 32 registers
Timer/Counters 1 timer/counter with compare modes 2 timers/counters with compare modes 2 timers/counters with compare modes
Programming Method In-system programming and ICSP In-system programming and ICSP In-system programming and ICSP

تفاوت‌های کلیدی

  • Lower memory requirement for small control tasks (در مقابلATTINY85-20MU)
  • Matching 20 MHz performance in a smaller-memory configuration (در مقابلATTINY85-20MU)
  • Higher clock rating with the same 4 KB program-memory class (در مقابلATTINY44A-MUR)

یادداشت‌های طراحی

Assign the PCB footprint from the 20-QFN-EP package drawing rather than a generic 20-QFN land pattern. Confirm the exposed-pad dimensions, perimeter-terminal pitch, pin-one orientation, and paste recommendations in the manufacturer package documentation. Place the decoupling capacitor beside the supply terminal and provide an unobstructed thermal path through the exposed pad. Incorrect exposed-pad geometry can affect soldering, electrical performance, and heat dissipation even when the peripheral pin assignments are correct.

Keep the ICSP programming interface accessible and preserve the reset path for production programming. Route programming and clock-sensitive nets away from switching nodes and high-current actuator drivers. The ATTINY45-20MU has only six general-purpose I/O lines, so early pin assignment prevents avoidable rerouting: account for alternate peripheral functions, pull resistors, user controls, status indicators, ground return paths, and the programming interface before releasing the schematic.

Do not select ATTINY85-20MU solely because it uses the same footprint; it doubles Flash from 4 KB to 8 KB and can alter timing, resource use, and firmware behavior. Likewise, verify the fuse configuration, boot mode, clock source, and reset behavior of every alternate before production use. The 256-byte SRAM limit is particularly important because stack consumption, buffers, and communication state can exhaust memory even when the linked Flash image appears small.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact orderable part.

جستجوهای مرتبط

attiny45 pinout attiny45 datasheet attiny45 vs attiny85 attiny45 arduino attiny45 price attiny45 programming attiny45 usb ATTINY45-20MU datasheet ATTINY45-20MU pinout ATTINY45-20MU equivalent ATTINY45-20MU replacement ATTINY45-20MU footprint Microchip ATTINY45-20MU ATTINY45-20MU application circuit ATTINY45-20MU vs ATTINY85-20MU

قطعات و اصطلاحات مرتبط

Microchip Technology ATTINY45-20MU ATtiny45 ATTINY85-20MU ATTINY44A-MUR AVR architecture 8-bit RISC microcontroller embedded microcontroller TinyAVR in-system programmable Flash EEPROM SRAM general-purpose I/O timer/counter In-Circuit Serial Programming ICSP 20-QFN-EP QFN package family surface-mount package exposed thermal pad Functional Safety FuSa 20 MHz clock sensor node actuator controller
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ