Broadcom

BCM53134OIFBG - 5-Port Gigabit Ethernet Switch | Broadcom

MPN: BCM53134OIFBG ✓ فعال
10/100/1000BASE-T Rds(on) 256-FBGA (11 x 11 mm) Package 10/100/1000 Mb/s Speed
حداقل سفارش: 1 |

BCM53134OIFBG نمای کلی

The Broadcom BCM53134OIFBG is a low-power Gigabit Ethernet switch controller with four full-duplex 10/100/1000BASE-T Ethernet transceivers and two PHY-less interfaces in a 256-FBGA package measuring 11 x 11 mm. It supports connectivity at 10, 100, and 1000 Mb/s and provides an RGMII interface for connection to a CPU or router chip.

An Ethernet switch controller is a semiconductor that coordinates traffic between multiple network ports and an upstream processor. Within the product hierarchy, the BCM53134OIFBG belongs to the Ethernet switch controller class, then interface ICs, then integrated circuits. Its combination of integrated copper Ethernet PHYs and PHY-less ports allows one device to support both physical network connections and high-speed links to a host processor.

The manufacturer datasheet identifies four full-duplex 10/100/1000BASE-T transceivers and two PHY-less CPU or router interfaces. One RGMII interface can be configured as an IMP, or In-Band Management port. The device also supports IEEE 802.3 Ethernet operation and SPI configuration connectivity. These characteristics make the controller suitable for consolidated network-edge equipment rather than a single-port interface design.

The BCM53134OIFBG combines four Gigabit Ethernet PHYs with two processor-facing interfaces in one package. Full-duplex operation permits simultaneous transmission and reception on each copper port, while selectable 10, 100, and 1000 Mb/s speeds support legacy and modern network endpoints. The RGMII host interface provides a conventional parallel Ethernet connection to a router, application processor, or other switching entity.

Typical uses include home gateways, routers, Ethernet switches, network interface controllers, and embedded network equipment. A port can be connected through its integrated 10/100/1000BASE-T transceiver, while the two PHY-less interfaces provide flexibility when the board uses external magnetics, optical PHYs, or a direct processor link. The SPI interface supports configuration access, and the IMP option adds an in-band management path for suitable system architectures.

PCB design should preserve the manufacturer’s recommended high-speed trace geometry, controlled-impedance routing, reference planes, and separation between Ethernet and processor-facing interfaces. Because the device integrates multiple PHYs and digital interfaces in a 256-FBGA package, power delivery, via distribution, thermal management, and decoupling require careful implementation. Use the manufacturer’s pin-description and layout guidance when assigning every ball and supplying the power rails.

This page consolidates the BCM53134OIFBG’s functional architecture, verified package information, pricing reference, application guidance, and replacement considerations into an engineering-focused resource. It also distinguishes the target device from closely related BCM53134 ordering variants so engineers can assess replacement compatibility without assuming that a shared family name guarantees pin compatibility.

جایگزین‌های drop-in برای BCM53134OIFBG — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

BCM53134MIFBG

✅ جایگزین مستقیم
📦 256-FBGA (11 x 11 mm)
Same BCM53134 family, four 10/100/1000BASE-T PHYs, two PHY-less interfaces, RGMII and SPI; ordering-code and option differences require final ball-map review

📋 جایگزین مرجع (خارج از کاتالوگ)

BCM53134OIFBG حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Gigabit Ethernet switch controller
Integrated Ethernet PHYs 4 full-duplex PHYs
PHY-less Interfaces 2 interfaces
Supported Copper Ethernet Speeds 10/100/1000 Mb/s
Copper Ethernet Standards 10/100/1000BASE-T
Duplex Operation Full duplex
Processor Interface RGMII
In-Band Management Port One RGMII interface configurable as IMP
Configuration Interface SPI
Ethernet Standard IEEE 802.3
بسته‌بندی 256-FBGA (11 x 11 mm)
نوع نصب Surface mount
Moisture Sensitivity Level MSL 3
وضعیت RoHS Compliant
Number of I/O Interfaces 6 interfaces: 4 integrated PHYs and 2 PHY-less interfaces

راهنمای پیکربندی پین BCM53134OIFBG 256-fbga (11 x 11 mm)

پیکربندی پین برای BCM53134OIFBG (پکیج 256-fbga (11 x 11 mm)). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 256-fbga (11 x 11 mm) برای BCM53134OIFBG

داده پین‌آوت تفصیلی موجود نیست برای BCM53134OIFBG.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

BCM53134OIFBG مناسب است برای 6 کاربردs: Home Gateway, Multi-Port Ethernet Switch, Router CPU Interface, Network Interface Controller, Industrial Network Equipment, Embedded Network Appliance.

🌐

Home Gateway

The BCM53134OIFBG fits a home gateway that must terminate several wired network connections while retaining a fast link to a routing processor. Its four integrated 10/100/1000BASE-T PHYs support copper links at 10, 100, or 1000 Mb/s, and the two PHY-less interfaces provide additional links to a CPU or router chip through RGMII. This consolidation reduces the number of separate Ethernet interface devices in the design. The tradeoff is a demanding 256-FBGA layout with 11 x 11 mm dimensions, so magnetics, controlled-impedance routing, power distribution, and thermal verification must begin during schematic capture rather than after placement.

🌐

Multi-Port Ethernet Switch

The BCM53134OIFBG is appropriate for a compact multi-port Ethernet switch requiring four integrated copper PHY channels and flexibility for upstream connectivity. Each full-duplex 10/100/1000BASE-T transceiver can support a network endpoint, while one RGMII link can operate as an In-Band Management port according to the Broadcom manufacturer datasheet. That architecture supports local traffic handling and management functions without relying on four independent interface ICs. The principal engineering constraint is PCB implementation: Ethernet differential pairs require uninterrupted reference planes and controlled impedance, while the fine-pitch BGA requires dense via distribution and multiple local decoupling connections.

🔧

Router CPU Interface

The BCM53134OIFBG can provide the Ethernet-facing hardware around a router CPU while maintaining two PHY-less paths for upstream or specialized connections. Its RGMII interface offers a parallel processor link, and the manufacturer datasheet confirms that one RGMII connection can be configured as an In-Band Management port for management traffic. This makes the controller useful where copper ports and a management path must coexist. Designers should verify RGMII timing, voltage compatibility, clock topology, and board-level isolation against the processor requirements before assigning the interfaces.

🖥️

Network Interface Controller

The BCM53134OIFBG supports a network interface controller design that needs several 10/100/1000BASE-T endpoints plus flexible host-facing connections. Four integrated full-duplex PHYs handle copper media, and the two PHY-less interfaces avoid adding unnecessary PHY circuitry when a direct digital link is appropriate. The Broadcom manufacturer datasheet also identifies SPI configuration connectivity, providing a dedicated control path for register initialization. Compared with four isolated single-port devices, the consolidated controller can simplify enclosure space and system architecture, but software initialization, PHY calibration, thermal margins, and PCB signal integrity remain design-level responsibilities.

🏭

Industrial Network Equipment

The BCM53134OIFBG can support industrial networking equipment that combines four wired Ethernet endpoints with an upstream controller and management connectivity. Its full-duplex 10/100/1000BASE-T PHYs support legacy 10 Mb/s devices as well as 100 Mb/s and Gigabit endpoints, while the RGMII and IMP options provide additional topology choices. This makes the device relevant to industrial gateways, controllers, and embedded switching subsystems. Before release, confirm the electrical limits, operating temperature grade, environmental qualification, isolation strategy, and thermal performance required by the specific industrial product classification.

🔧

Embedded Network Appliance

The BCM53134OIFBG fits embedded appliances that expose several copper Ethernet connections while using a local application processor for traffic management. Four integrated Gigabit PHYs reduce component count at the network edge, and the two PHY-less ports permit direct RGMII links when an external PHY, specialized interface, or additional processor connection is needed. The Broadcom manufacturer datasheet identifies SPI for configuration and optional In-Band Management operation. For a compact appliance, the 256-FBGA package creates a demanding assembly process, making land-pattern inspection, stencil qualification, X-ray inspection, and careful BGA power delivery central to manufacturing readiness.

What is BCM53134OIFBG?
The BCM53134OIFBG is a Broadcom Gigabit Ethernet switch controller with four full-duplex 10/100/1000BASE-T transceivers and two PHY-less interfaces in a 256-FBGA package. According to the manufacturer datasheet, one of the two RGMII interfaces can be configured as an In-Band Management port, allowing the device to combine copper network ports with processor-facing connectivity.
How many Ethernet ports does BCM53134OIFBG support?
The BCM53134OIFBG supports four integrated 10/100/1000BASE-T Ethernet PHYs plus two PHY-less interfaces. The four copper-facing ports operate in full duplex at 10, 100, or 1000 Mb/s, while the two PHY-less interfaces connect to a CPU or router chip. According to the Broadcom manufacturer datasheet, one RGMII interface can also serve as an IMP management port.
What interfaces are available on BCM53134OIFBG?
The BCM53134OIFBG provides RGMII connectivity for CPU or router entities, an SPI configuration interface, four integrated copper Ethernet PHYs, and two PHY-less interfaces. According to the Broadcom manufacturer datasheet, one RGMII interface may be configured as an In-Band Management port. This mix supports both standalone network termination and direct upstream-processor integration.
What package does BCM53134OIFBG use?
The BCM53134OIFBG uses a 256-FBGA package measuring 11 x 11 mm. Broadcom identifies the BCM53134 family as an IEEE 802.3 interface device with four 10/100/1000BASE-T transceivers and two PHY-less interfaces. The land pattern and ball assignment must be taken directly from the manufacturer pin table before PCB routing.
Where can I download the BCM53134OIFBG datasheet PDF?
The BCM53134OIFBG datasheet PDF is available through the Broadcom product-brief documentation and the manufacturer-hosted document mirrored in the product records. The document identifies four full-duplex Gigabit Ethernet transceivers, two PHY-less CPU or router interfaces, and optional In-Band Management operation through RGMII. Use the manufacturer document for electrical limits, register details, and the authoritative ball map.
Where can I find the BCM53134OIFBG pinout?
The BCM53134OIFBG pin assignment is found in the manufacturer’s 256-FBGA ball map and pin-description table. Because this is a fine-pitch BGA with 256 balls, use that table for every power, ground, Ethernet, RGMII, SPI, management, clock, and configuration connection. Do not infer ball functions from a generic package drawing or from another BCM53134 ordering code without comparing the manufacturer data.
Can BCM53134OIFBG support Gigabit Ethernet?
Yes, the BCM53134OIFBG supports 1000 Mb/s operation on each of its four integrated Ethernet transceivers, as well as 10 and 100 Mb/s rates. The Broadcom manufacturer datasheet describes the integrated PHYs as full-duplex 10/100/1000BASE-T devices. Two additional PHY-less interfaces provide upstream or special-purpose connectivity beyond the four integrated copper ports.
What is the difference between BCM53134OIFBG and BCM53134MIFBG?
BCM53134OIFBG and BCM53134MIFBG are ordering variants within the Broadcom BCM53134 Ethernet switch family. The product records identify BCM53134MIFBG with IEEE 802.3 operation, four 10/100/1000BASE-T PHYs, RGMII, SPI, and a 256-FBGA package. Before treating BCM53134MIFBG as a replacement, verify the complete ball map, configuration interface, ordering options, and lifecycle requirements against the manufacturer documentation.
Can BCM53134MIFBG replace BCM53134OIFBG?
BCM53134MIFBG may be considered for BCM53134OIFBG replacement only after a complete pin and function review. Both parts are identified within the Broadcom BCM53134 family with four Gigabit Ethernet PHYs, two PHY-less interfaces, RGMII, SPI, and a 256-FBGA package, which makes the family relationship strong. Final qualification still requires comparing every ball, clock requirement, strap, register, and ordering option.
What is the best drop-in replacement for BCM53134OIFBG?
The BCM53134MIFBG is the closest verified same-brand BCM53134 alternative because its listing identifies the same four-port 10/100/1000BASE-T architecture, two PHY-less interfaces, RGMII, SPI, and 256-FBGA format. However, no independently verified cross-brand drop-in replacement was established. Treat BCM53134MIFBG as a conditional family alternative and confirm its complete pin map before production use.
Is BCM53134OIFBG suitable for a home gateway or router?
The BCM53134OIFBG is suitable for gateway and router designs requiring four copper Gigabit Ethernet connections plus upstream processor connectivity. Its four full-duplex 10/100/1000BASE-T PHYs, two PHY-less interfaces, RGMII, and optional In-Band Management port align with multi-port network-edge equipment. Board-level suitability also depends on magnetics, impedance control, thermal design, and the required RGMII timing.
When should I choose BCM53134OIFBG over another Ethernet switch controller?
Choose BCM53134OIFBG when the design needs four integrated 10/100/1000BASE-T PHYs and two additional PHY-less interfaces in a 256-FBGA package. The Broadcom manufacturer datasheet confirms RGMII and SPI connectivity, including optional IMP operation. Select another controller when it offers a more appropriate package, power budget, port count, software model, or qualified supply path for the target product.
Is BCM53134OIFBG in stock and what is its lead time?
Current stock and a production lead time should be confirmed through the Request a Quote form on this page. The BCM53134OIFBG is shown in current distributor catalogs, but that alone does not establish a fixed quantity available for every order. The quote request can confirm exact MPN status, package form, order quantity, and the lead time associated with the requested configuration.
Where can I buy BCM53134OIFBG online?
The BCM53134OIFBG can be requested through the Request a Quote form on this page. The form is the appropriate route for confirming exact MPN availability, acceptable order quantities, current delivery timing, and shipment details. The BCM53134OIFBG is a cataloged Broadcom interface IC with a manufacturer datasheet and a 256-FBGA package.
What are the key specifications of BCM53134OIFBG?
The BCM53134OIFBG combines four full-duplex 10/100/1000BASE-T Ethernet transceivers, two PHY-less CPU or router interfaces, RGMII, SPI, and optional In-Band Management in a 256-FBGA package measuring 11 x 11 mm. According to the Broadcom manufacturer datasheet, the architecture supports IEEE 802.3 networking while consolidating copper ports and upstream connectivity in one device.
What Broadcom Ethernet equivalent can replace BCM53134OIFBG?
No verified cross-brand drop-in equivalent is established for the BCM53134OIFBG. The closest identified family alternative is the Broadcom BCM53134MIFBG, which shares the four-port Gigabit Ethernet, RGMII, SPI, and 256-FBGA architecture. Because an Ethernet switch controller depends on exact ball mapping, clocking, management features, and board constraints, do not substitute a competing manufacturer solely from broad port-count and speed similarities.

داده‌های مرجع مهندسی برای BCM53134OIFBG — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the BCM53134OIFBG when a design needs four integrated full-duplex 10/100/1000BASE-T ports, two additional PHY-less interfaces, and an RGMII connection to a host processor in a 256-FBGA package. Its optional In-Band Management configuration is useful for systems that need a management path alongside network traffic. BCM53134MIFBG is the closest identified same-brand family alternative because it shares the four-PHY, two-PHY-less-interface, RGMII, and SPI architecture; it is appropriate for consideration only after the complete ball map and option differences are verified. No independently confirmed cross-brand drop-in replacement was identified, so a competing controller should be selected only when the product requires a different package, port count, power profile, software ecosystem, qualification, or supply arrangement. For any substitution, verify RGMII timing, clocking, management features, PHY behavior, thermal limits, and PCB compatibility.

مقایسه با جایگزین‌ها

پارامتر این محصول BCM53134MIFBG
Brand Broadcom Broadcom
Package 256-FBGA (11 x 11 mm) 256-FBGA (11 x 11 mm)
Integrated Ethernet PHYs 4 full-duplex PHYs 4 full-duplex PHYs
PHY-less Interfaces 2 interfaces 2 interfaces
Supported Ethernet Speeds 10/100/1000 Mb/s 10/100/1000 Mb/s
Copper Ethernet Type 10/100/1000BASE-T 10/100/1000BASE-T
Processor Interface RGMII RGMII
Configuration Interface SPI SPI
Ethernet Standard IEEE 802.3 IEEE 802.3

تفاوت‌های کلیدی

  • Combines four copper PHYs and two PHY-less links in one package (در مقابلBCM53134MIFBG)
  • Supports processor-facing RGMII connectivity (در مقابلBCM53134MIFBG)
  • Provides an In-Band Management option (در مقابلBCM53134MIFBG)

یادداشت‌های طراحی

Route all Ethernet differential pairs as controlled-impedance, tightly coupled pairs over a continuous reference plane. Keep PHY-to-magnetics paths short, minimize vias, and follow the manufacturer’s recommended RGMII trace topology. Because the 256-FBGA package includes both analog Ethernet functions and high-speed digital interfaces, isolate the PHY sections logically and physically to reduce coupling between copper links and the CPU-facing RGMII signals.

Follow the manufacturer’s power-plane, via-array, and decoupling recommendations for every supply ball. Place local high-frequency ceramic decoupling close to the device and use adequate bulk capacitance on each rail, with via distribution arranged to minimize package and via inductance. Verify startup sequencing, voltage limits, and supply-noise sensitivity in simulation because incorrect rail distribution can affect Ethernet transceiver performance and RGMII timing.

Evaluate junction temperature under worst-case Ethernet activity and processor-interface traffic. The 256-FBGA package relies heavily on board copper and via structures for heat removal, so provide uninterrupted ground planes, thermal vias, and adequate enclosure ventilation where applicable. Confirm the package-specific thermal data against the manufacturer datasheet before assigning a maximum ambient temperature or designing a fanless enclosure.

Do not treat a family ordering code as proof of drop-in compatibility. For BCM53134MIFBG, compare every BGA ball, power rail, strap, clock input, reset behavior, management function, and configuration option with BCM53134OIFBG before changing the BOM. Also validate magnetics, cable reach, auto-negotiation behavior, firmware initialization, and management-port configuration so the hardware substitution does not introduce system-level incompatibility.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS compliance is identified in the product record for BCM53134OIFBG. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is identified for this exact MPN.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

BCM53134OIFBG datasheet BCM53134OIFBG specifications BCM53134OIFBG pinout BCM53134OIFBG datasheet pdf BCM53134OIFBG equivalent BCM53134OIFBG replacement BCM53134OIFBG cross reference BCM53134OIFBG vs BCM53134MIFBG BCM53134OIFBG price BCM53134OIFBG stock Broadcom BCM53134OIFBG BCM53134OIFBG 256 FBGA BCM53134OIFBG RGMII switch BCM53134OIFBG router application What can replace BCM53134OIFBG?

قطعات و اصطلاحات مرتبط

Broadcom BCM53134OIFBG BCM53134MIFBG Gigabit Ethernet switch controller Ethernet switch controller Interface IC Integrated circuit Semiconductor 10/100/1000BASE-T Gigabit Ethernet PHY RGMII SPI In-Band Management port IEEE 802.3 256-FBGA BGA package Surface mount Full duplex PHY-less interface Managed network equipment Home gateway Router RoHS MSL 3 Magnetics
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ