C8051F315-GM - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
MPN: C8051F315-GM ✓ فعالC8051F315-GM نمای کلی
A mixed-signal microcontroller is a semiconductor that combines a digital processor core with analog measurement or control functions on one device. In the system hierarchy, the C8051F315 is an 8-bit MCU, a mixed-signal system-on-chip, and a member of the C8051F31x family. This integration can reduce component count, simplify firmware, and keep sensor or control signals close to the processing logic.
Key features include an 8-bit 8051-compatible core, 25 MHz maximum clock operation, 8 kB of Flash program memory, and 1.25 kB of RAM. The C8051F31x family also provides communication interfaces and four 16-bit timers. A 2.7 V to 3.6 V operating supply range supports low-voltage embedded systems, while the 28-QFN package saves board area compared with larger leaded devices.
The pipelined 8051 architecture reaches 25 MIPS at 25 MHz, providing substantially more processing throughput than the clock rate alone suggests. Silicon Labs positions the C8051F31x as a highly integrated mixed-signal MCU for cost-sensitive embedded systems requiring analog conversion, timers, serial communication, and programmable control in a compact package.
Typical applications include industrial sensor controllers, compact motor-control modules, digital thermometers, building-control interfaces, communication equipment, and small consumer-control products. Its mixed-signal integration is especially useful when a design must acquire an analog input, process it digitally, and operate timers or communications from the same controller.
PCB design should preserve the manufacturer's recommended decoupling and exposed-pad land pattern, because the QFN thermal pad is part of both the package footprint and its heat-dissipation path. Firmware migration among compatible C8051F31x devices should be checked carefully for peripheral availability, interrupt-vector differences, and analog-channel assignments rather than relying only on the package dimensions.
This product overview combines family-level engineering details, verified sourcing information, same-family alternatives, and practical design guidance to support faster component selection. It also highlights the memory, timer, package, and mixed-signal considerations that determine whether the C8051F315-GM fits a given embedded-control design.
جایگزینهای drop-in برای C8051F315-GM — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای C8051F315-GM (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Package Type, RAM, Flash Memory.
C8051F313-GM
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
C8051F312-GM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
C8051F314-GM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
C8051F311-GM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←C8051F310-GM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
C8051F315-GM حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 8-bit mixed-signal microcontroller |
| Processor Core | 8051-compatible CISC core |
| حداکثر فرکانس کلاک | 25 MHz |
| Maximum Throughput | 25 MIPS |
| Flash Memory | 8 kB |
| RAM | 1.25 kB |
| عرض گذرگاه داده | 8 bit |
| Supply Voltage Range | 2.7 V to 3.6 V |
| محدوده دمای کاری | -40 °C to +85 °C |
| Timer Count | 4 x 16-bit timers |
| External Analog Inputs | Up to 13 single-ended or differential inputs |
| بستهبندی | 28-QFN, 5 x 5 mm |
| Package Type | Surface-mount QFN with exposed pad |
| Series | C8051F31x |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین C8051F315-GM surface-mount qfn with exposed pad
پیکربندی پین برای C8051F315-GM (پکیج surface-mount qfn with exposed pad). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای C8051F315-GM.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
C8051F315-GM مناسب است برای 6 کاربردs: Industrial Sensor Controllers, Digital Thermometers and Environmental Monitors, Compact Motor and Valve Control, Communication Interface Modules, Building Control and HVAC Modules, Low-Voltage Consumer Control Products.
Industrial Sensor Controllers
The C8051F315-GM suits compact controllers that acquire analog sensor signals and perform local filtering, thresholding, or state-machine control. Its 25 MHz pipelined 8051-compatible core provides up to 25 MIPS of throughput, while the C8051F31x family supports as many as 13 external single-ended or differential inputs. Four 16-bit timers can support sampling intervals, pulse measurement, motor timing, or service outputs. The 8 kB Flash limit requires a deliberate firmware budget, while 1.25 kB of RAM can hold working buffers and communication state. For industrial deployment, validate analog calibration, input noise, grounding, and enclosure temperature conditions against the final installation environment.
پیشنهادی
Digital Thermometers and Environmental Monitors
A temperature or environmental monitor can use the C8051F315-GM to acquire an analog sensor output, apply calibration, update a display, and report readings over a serial interface. The 25 MHz CPU provides useful response margin for sampling, filtering, and debounce logic, while the four 16-bit timers allow precise periodic sampling without excessive polling. The 2.7 V to 3.6 V operating range suits compact low-voltage designs. With only 1.25 kB of RAM, the firmware should avoid unnecessarily large sample histories and instead use compact buffers. Analog reference stability, sensor excitation, and calibration-table size will directly influence measurement accuracy and should be evaluated together with the MCU resources.
پیشنهادی
Compact Motor and Valve Control
The C8051F315-GM can manage small motors, valves, or relays where four dedicated 16-bit timers and mixed-signal feedback are valuable. Timer resources can establish fixed-frequency drive, capture pulse or position information, and coordinate actuator timing, while the 25 MIPS core can execute state logic, fault detection, and communication handling. Its 28-QFN 5 x 5 mm package helps reduce board area in space-constrained modules. The available 8 kB Flash and 1.25 kB RAM require concise control code and limited buffering. Pin assignment, exposed-pad soldering, output drive capability, and any inductive-load transient path must be designed for the actual actuator rather than inferred solely from the MCU family name.
پیشنهادی
Communication Interface Modules
The C8051F315-GM is appropriate for small protocol-conversion or equipment-control modules that need local processing beside a serial interface. Its 25 MHz 8051-compatible core can handle framing, commands, timers, and supervisory logic, while the mixed-signal resources allow status or sensor data to be integrated without a separate analog controller. The 1.25 kB RAM limit favors streaming protocols and short packet buffers over large frame accumulation. Firmware developers should confirm the required UART, SPI, or other communication resources and their alternate pin assignments for the selected -GM package. A level-shifting or protection strategy may also be needed when the module interfaces with industrial logic outside the 2.7 V to 3.6 V MCU supply domain.
پیشنهادی
Building Control and HVAC Modules
A compact building-control module can use the C8051F315-GM to read mixed inputs, operate timers, and manage outputs for heating, cooling, or occupancy functions. The C8051F31x family's support for up to 13 external single-ended or differential inputs allows several sensor channels to share one controller, while four 16-bit timers provide scheduling and pulse timing. The 28-QFN footprint supports dense terminal or sensor modules. Firmware should include debounce, fault detection, and safe-state behavior for actuator failures, while the 8 kB Flash limit encourages compact tables and modular code. Production validation should cover sensor accuracy, electrical isolation where required, thermal conditions in the enclosure, and communication continuity during power transitions.
پیشنهادی
Low-Voltage Consumer Control Products
The C8051F315-GM can serve as the central controller in a small consumer appliance, accessory, or configurable control product where a 3.3 V-class supply and compact footprint are desired. Its 25 MHz processing speed supports responsive button handling, display updates, motor timing, and serial configuration, while the integrated mixed-signal resources reduce the need for separate sensing circuitry. The 8 kB Flash and 1.25 kB RAM are adequate for focused applications but require disciplined code and data sizing. Firmware must handle power-button behavior, brownout recovery, and actuator limits. The QFN exposed pad should be connected and soldered according to the manufacturer's land pattern so electrical and thermal performance remain consistent.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای C8051F315-GM — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | C8051F313-GM | C8051F312-GM | C8051F314-GM | C8051F311-GM | C8051F310-GM |
|---|---|---|---|---|---|---|
| Package | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) | 28-QFN (5 x 5 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Processor Architecture | 8-bit 8051-compatible pipelined core | 8-bit 8051-compatible core | 8-bit 8051-compatible core | 8-bit 8051-compatible core | 8-bit 8051-compatible core | 8-bit 8051-compatible core |
تفاوتهای کلیدی
- Provides 1.25 kB of RAM for working data and communication buffers (در مقابلC8051F312-GM)
- Combines four 16-bit timers with a 25 MIPS core (در مقابلC8051F313-GM)
- Uses the same compact 28-QFN 5 x 5 mm footprint as the leading same-family candidates (در مقابلC8051F311-GM)
یادداشتهای طراحی
Use the exposed pad and thermal-via arrangement from the manufacturer land pattern exactly as specified for the 28-QFN package. The exposed pad is part of the electrical footprint and must connect to the appropriate ground or supply connection described in the C8051F31x datasheet. Place the device-side decoupling capacitors close to their designated pins and preserve short return paths for analog signals to reduce supply disturbance and measurement error.
Do not assume that two devices in the same 28-QFN family are interchangeable merely because their packages match. Compare Flash capacity, RAM, timer count, analog-channel assignments, communication peripherals, interrupt vectors, and port multiplexing in the family datasheet. After selecting a candidate, rebuild the firmware, verify startup and reset behavior, and test every analog and communication path before using it as a production replacement.
Design the 2.7 V to 3.6 V supply rail with transient margin for analog conversion and peripheral activity. Check the selected external capacitors for effective capacitance across temperature and DC-bias derating. Keep the analog reference and sensor return paths compact, and isolate noisy switching or actuator nodes from sensitive inputs. Brownout behavior and the controller's safe output states should be validated under worst-case supply sag.
اطلاعات انطباق
RoHS compliance is identified in the component listing. REACH, AEC-Q100, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the manufacturer.