CD40163BD - 4-Bit Binary Counter, 12 MHz, 16-CDIP | Harris
MPN: CD40163BD ✗ پایان تولیدCD40163BD نمای کلی
A CMOS binary counter is a digital logic device that increments or decrements a four-bit count on command. Clocked inputs determine when the internal state changes, while control inputs can determine whether the device counts, loads a preset value, holds its current state, or resets the count. The CD40163BD therefore sits within the hierarchy of counter ICs, digital logic ICs, and general-purpose semiconductor devices.
The principal operating characteristics are a 3 V to 18 V supply range, a maximum listed operating frequency of 12 MHz, positive-edge counting, and a 4-bit counting element. Its 16-CDIP construction provides a through-hole package suitable for industrial, control, and legacy electronic assemblies. The component is also identified as RoHS-compliant in the manufacturer-related catalog information.
CD40163 counters are designed for synchronous operation, allowing multiple counter sections to share a common clock and update in a coordinated manner. This characteristic is useful when a system divides a master clock into several related binary count phases. The CD40160B through CD40163B family is described as pin-compatible with the corresponding 74LS160 through 74LS163 counter series, providing useful context for legacy system upgrades.
Typical uses include digital timing generation, frequency division, event sequencing, programmable pulse and timing systems, industrial counters, and control logic that requires repeatable four-bit binary states. The 3 V to 18 V operating range also permits operation across common supply arrangements found in legacy CMOS equipment, although each system must maintain valid input levels for its supply voltage.
The primary design consideration is preserving the counter's synchronous control behavior and avoiding invalid clock and control-input combinations. PCB design should provide adequate supply bypassing and clean clock routing because propagation delays affect how closely multiple counters can update. The 16-CDIP footprint requires through-hole placement, making mechanical compatibility more important than package miniaturization for new compact designs.
This product record combines the exact CD40163BD ordering information, electrical and package attributes, related-family guidance, source links, and application-focused engineering context to support component identification, legacy maintenance, and board-level design decisions.
جایگزینهای drop-in برای CD40163BD — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینCD40163BD حداکثر مقادیر مجاز و مشخصات الکتریکی
| Counter Type | Binary counter |
| Counting Element Count | 1 element |
| Counter Width | 4 bits |
| Clock Edge | Positive edge |
| Supply Voltage Range | 3 V to 18 V |
| Maximum Operating Frequency | 12 MHz |
| Logic Family | CD4000 CMOS |
| Counting Mode | Synchronous programmable binary counter |
| Package Type | 16-CDIP |
| تعداد پینها | 16 pins |
| نوع نصب | Through-hole |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین CD40163BD 16-cdip
پیکربندی پین برای CD40163BD (پکیج 16-cdip). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای CD40163BD.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
CD40163BD مناسب است برای 6 کاربردs: Digital Frequency Divider, Industrial Sequence Controller, Programmable Timing Module, Legacy Test and Measurement Equipment, Event Counter and Batch Divider, Embedded Digital Control.
Digital Frequency Divider
The CD40163BD can divide a periodic clock into lower-frequency states because it is a 4-bit binary counter with positive-edge operation and a listed maximum operating frequency of 12 MHz. Connect the clock source to the clock input and use the four count outputs to derive predictable binary sequences. Synchronous counting is valuable when downstream circuitry must observe coordinated count transitions rather than delayed ripple transitions. Designers should verify clock pulse width, setup timing, and load-control timing in the family datasheet, and they should use a clean clock route to minimize counting errors.
پیشنهادی
Industrial Sequence Controller
The CD40163BD is suited to repeatable four-step sequencing in industrial control equipment because each of its four binary outputs represents one count state. A common clock can coordinate the sequence, while load and reset controls can establish a repeatable starting point. The 3 V to 18 V supply range supports common legacy CMOS control environments. Engineers should define every count-state transition, account for propagation delay between control and clock signals, and validate the 12 MHz frequency limit against the actual clock and load timing.
پیشنهادی
Programmable Timing Module
The CD40163BD can form the counting element of a programmable timing module by loading a binary value and allowing the counter to advance to a terminal count. The four count outputs can be decoded to create timing intervals, state indicators, or delayed control events. Its positive-edge clocking and synchronous architecture help produce repeatable state changes. Because the exact load and reset timing are family-level functional requirements, the circuit must follow the CD40163B datasheet and include suitable reset initialization before the timing sequence begins.
پیشنهادی
Legacy Test and Measurement Equipment
The CD40163BD is useful in legacy test and measurement equipment when a system requires a reliable binary event count synchronized to an external trigger. Its four count outputs can represent elapsed measurement intervals, channel selections, or timing positions. The 16-CDIP package allows direct insertion into repair boards designed for through-hole logic, while the 3 V to 18 V supply range accommodates established CMOS power rails. Technicians should check signal rise times, clock timing, and grounding when replacing an original counter in high-impedance analog-adjacent circuitry.
پیشنهادی
Event Counter and Batch Divider
The CD40163BD can count recurring events and divide them into groups of 2, 4, 8, or 16 through selected binary outputs. This makes it applicable to batch-control, event-counting, and repetitive-actuation systems. Positive-edge counting provides a defined response to each qualifying clock edge, while synchronous operation helps multiple control stages advance together. The implementation must suppress unwanted transitions, maintain valid logic levels across the 3 V to 18 V operating range, and include a controlled initialization path for repeatable operation after power-on or reset.
پیشنهادی
Embedded Digital Control
The CD40163BD can provide a compact binary state machine in an embedded control design that uses older CMOS logic rather than a microcontroller. The four count outputs form a natural state vector for controlling up to 16 sequential conditions, and the common clock coordinates state transitions. This is especially practical in legacy equipment with existing 16-CDIP logic-board layouts. The design must avoid relying on undocumented timing behavior, use appropriate pull devices where required by the surrounding interface, and keep clock and control traces short enough for reliable operation.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای CD40163BD — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Package | 16-CDIP |
| Brand | Harris Corporation |
| Counter Width | 4 bits |
| Counting Element Count | 1 element |
| Clock Edge | Positive edge |
| Supply Voltage Range | 3 V to 18 V |
| Maximum Operating Frequency | 12 MHz |
| Counting Function | Synchronous programmable binary counter |
| RoHS Status | Compliant |
تفاوتهای کلیدی
- Provides a 4-bit synchronous up-counting state machine (در مقابلCD40162BMS)
- Uses synchronous parallel loading rather than the asynchronous load behavior of CD40161BMS (در مقابلCD40161BMS)
- Combines a 3 V to 18 V supply range with a listed 12 MHz operating frequency (در مقابلCD40163BMS)
یادداشتهای طراحی
Route the clock to the CD40163BD as a short, direct trace with a stable return path. Clock edges must meet the rise-time, pulse-width, and setup requirements stated in the CD40160B through CD40163B family datasheet. Avoid routing the clock adjacent to noisy switching nodes or long analog inputs, because the 12 MHz operating limit describes the counter's logic capability but does not eliminate sensitivity to a poorly conditioned clock waveform.
Place the 16-CDIP device in the orientation specified by the manufacturer pin diagram and preserve adequate spacing for insertion and inspection. Because this is a through-hole package, verify the board's hole pattern and pin numbering before fabrication rather than relying on the generic dimensions of a standard DIP. Verify that board-level clearances and connector orientation preserve access to the counter for legacy repair or replacement.
Do not treat the CD40163, CD40162, and CD40161 counters as interchangeable merely because they share a family. The CD40163 uses up-counting with its defined synchronous parallel-load behavior, whereas family members differ in count direction or load timing. Reproduce the original control sequence and verify reset, load, clock, and output timing against the family datasheet before substituting a related device in production.
Supply the counter from a clean rail within the specified 3 V to 18 V range. Place local supply decoupling close to the device and keep switching-regulator and high-current return paths away from the clock and control traces. Confirm the actual input transition levels and operating current in the electrical characteristics; the counter can be synchronized correctly at the logic level yet still produce unreliable results if the supply or clock source is noisy.
اطلاعات انطباق
RoHS compliance is identified in the manufacturer-related catalog information. No separate REACH, halogen-free, conflict-minerals, or automotive qualification claim is established for the exact ordering code.