CD4040BCM - 12-Bit CMOS Binary Counter | onsemi
MPN: CD4040BCM ✓ فعالCD4040BCM نمای کلی
A binary counter is a sequential digital-logic circuit that records the number of clock transitions applied to it. The CD4040 belongs to the CMOS CD4000 logic family, which extends from counters and dividers into the broader hierarchy of CMOS logic ICs, digital semiconductors, and integrated circuits. Each of the 12 stages divides the preceding clock by two, allowing the component to support a chain of selectable frequency divisions.
The principal features of the CD4040BCM are its 12-stage counter organization, negative-edge clock triggering, binary counter/divider function, and reset control. It is suitable when a design needs multiple divide ratios without using a programmable microcontroller. The 16-SOIC package also supports compact conventional PCB assembly while exposing the counter outputs, clock input, and reset control through the device pins.
Operationally, the CD4040BCM uses master-slave flip-flop stages arranged as a ripple-carry counter. The count advances when the clock changes from a high level to a low level. A high level at the reset control returns the counter to its all-zero state. Because the stages are ripple based, propagation delay accumulates through the chain, so the maximum clock rate and output timing should be evaluated in the context of the longest division path used in the application.
Typical uses include digital frequency division, timing generation, pulse counting, programmable timing interfaces, oscillator and clock-conditioning circuits, and small control systems that need binary state sequencing. The negative-edge trigger also allows the counter to be synchronized carefully with other clocked logic when reset timing and edge relationships are controlled.
PCB design should reserve the pins for power, clock, reset, and all 12 counter outputs according to the manufacturer pin-description table. Keep the clock trace short and route it away from noisy switching nodes. If reset is driven by another circuit, constrain it so that power-up behavior and counter initialization remain deterministic.
This page combines the device's core counter characteristics, package information, application guidance, comparison points, and replacement considerations. It is intended to help engineers determine whether the CD4040BCM matches a required CMOS counter architecture and to plan a qualification review before using an alternate part on an existing board.
جایگزینهای drop-in برای CD4040BCM — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای CD4040BCM (همان فرمفاکتور و فوتپرینت) — متفاوت در Counter Type, Logic Family, Mounting Type, Package.
CD4040BM96
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
CD4040BNSRE4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
CD4040BM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←CD4040BCM حداکثر مقادیر مجاز و مشخصات الکتریکی
| Counter Type | 12-stage binary ripple-carry counter |
| Number of Counter Elements | 1 element |
| Counter Output Width | 12 bit |
| Clock Triggering Edge | Negative edge |
| Logic Family | CMOS CD4000 series |
| عملکرد | Binary counter and divider |
| Number of Counter Stages | 12 stages |
| بستهبندی | 16-SOIC |
| تعداد پایه | 16 pins |
| نوع نصب | Surface-mount package |
راهنمای پیکربندی پین CD4040BCM 16-soic
پیکربندی پین برای CD4040BCM (پکیج 16-soic). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای CD4040BCM.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
CD4040BCM مناسب است برای 6 کاربردs: Fixed Frequency Division, Pulse and Event Counting, Digital Timer and Retrigger, Clock Divider and State Sequencer, Oscillator Monitoring Circuit, Programmable Control Interface.
Fixed Frequency Division
The CD4040BCM suits fixed frequency-divider circuits because its 12-stage ripple architecture provides a sequence of divide-by-two outputs. Each counter stage offers a different division ratio, allowing one clock source to feed several timing domains without a programmable microcontroller. Because the stages are ripple based, cumulative propagation delay should be checked for the longest output path selected. The negative-edge clock trigger also requires the source waveform and timing budget to be evaluated around the falling edge. Use the 16-SOIC package only when the board has been laid out for the manufacturer's pin assignments and verified against the current device documentation.
پیشنهادی
Pulse and Event Counting
The CD4040BCM can count incoming pulses on each negative clock transition and retain the resulting binary state across 12 stages. This makes it appropriate for event accumulators, actuator-cycle counters, and basic industrial control counters where a fixed binary count is sufficient. The counter reset path should be initialized deterministically so a power-up or reset event does not produce an unintended count. For long counting sequences, assess ripple propagation delay and determine whether the application needs the most-significant output at a particular point in the count. The 16-SOIC footprint keeps the implementation compatible with conventional small-outline surface-mount assembly.
پیشنهادی
Digital Timer and Retrigger
The CD4040BCM can serve as the counting element in a digital timer or retriggerable interval circuit. Clock transitions advance the binary count, while the reset input establishes a repeatable starting state. In such a circuit, component tolerances, propagation delay, and the clock generator's timing accuracy determine the practical interval accuracy. The 12-stage capacity supports long count intervals or multiple tap points, allowing different delay thresholds to be selected from the counter outputs. Designers should define reset release behavior carefully so the timer does not begin counting before the intended trigger condition. The manufacturer pin table should govern signal routing and test-point placement.
پیشنهادی
Clock Divider and State Sequencer
The CD4040BCM is useful when a system must divide one clock into several slower binary-derived timing signals. Selecting different output stages produces powers-of-two intervals, which can coordinate sampling windows, display updates, or control-state transitions. The negative-edge trigger means the clock source should have a clean falling transition and acceptable edge shape. Since the counter is a ripple design, output transitions are not simultaneous, so downstream circuitry should not assume zero relative delay between stages. The 16-SOIC package offers a practical pin count for the 12 outputs plus control and supply functions, while the reset connection provides a defined initialization point for the sequencer.
پیشنهادی
Oscillator Monitoring Circuit
The CD4040BCM can monitor an oscillator by counting clock transitions and exposing different divided states for comparison or fault detection. In an oscillator-monitoring circuit, each negative transition advances the counter, allowing the system to distinguish a running clock from a stopped or improperly scaled signal. The monitored waveform should meet the device's input timing requirements, and the maximum operating clock frequency must be checked before the oscillator frequency is accepted. Reset can provide a repeatable monitoring interval. This application benefits from the counter's 12 binary stages because multiple observation points are available without requiring a microcontroller to decode every transition.
پیشنهادی
Programmable Control Interface
The CD4040BCM can act as a simple binary state counter within a programmable control interface. External logic can observe the 12 counter outputs, decode a selected stage, and initiate an action after a defined number of events. This architecture is useful when a small fixed-state controller is preferable to a microcontroller. Reset behavior must be coordinated with the surrounding control logic to avoid racing between the counter and command decode. Timing paths should account for the negative-edge trigger and the propagation delay through each selected ripple stage. The 16-SOIC package supports compact placement, but every signal should be assigned from the manufacturer pin-description table rather than inferred from a similar counter.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای CD4040BCM — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | CD4040BM96 | CD4040BNSRE4 | CD4040BM |
|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | onsemi | onsemi | onsemi | onsemi |
| Counter Type | Binary ripple-carry counter | 12-stage CMOS ripple-carry counter | 12-stage CMOS counter | 12-stage CMOS counter |
| Number of Counter Stages | 12 stages | 12 stages | 12 stages | 12 stages |
| Counter Output Width | 12 bit | 12 bit | 12 bit | 12 bit |
| Clock Triggering Edge | Negative edge | Negative edge | Negative edge | Negative edge |
| Logic Family | CMOS CD4000 series | CMOS CD4000 series | CMOS CD4000 series | CMOS CD4000 series |
| Counter Function | Counter and divider | Counter and divider | Counter | Counter |
| Reset Function | Resets counter to all-zero state | Resets counter to all-zero state | Reset control | Reset control |
تفاوتهای کلیدی
- Preserves the core counter architecture within the onsemi family (در مقابلCD4040BM96)
- Maintains negative-edge counting behavior (در مقابلCD4040BNSRE4)
- Retains the 12-bit binary state and 16-SOIC footprint (در مقابلCD4040BM)
یادداشتهای طراحی
Route the clock as a short, continuous trace and keep it away from switching-node copper and high-current return paths. The CD4040BCM advances on the negative clock transition, so source ringing, slow falling edges, or coupling near the falling edge can shift the effective count instant. Use a ground reference plane, minimize stub branches, and place any required clock-conditioning circuitry close to the device. Validate the delivered waveform at the IC pin rather than relying only on the signal measured at the oscillator.
Do not assume that all 12 outputs change at the same instant. The ripple arrangement means propagation delay accumulates through the selected stages, and the relative timing of the counter outputs must be included in downstream timing calculations. If a later stage triggers another device, use that stage's actual worst-case transition timing and add board propagation delay. Applying a reset pulse that violates the required pulse width or setup timing may also produce an unreliable initialization sequence.
Assign every connection from the manufacturer pin-description table before laying out the PCB. Provide a continuous ground reference and place the device's supply bypass structure at the package pins using the layout guidance in the manufacturer documentation. The 12 counter outputs, clock, reset, supply, and ground connections should be checked against the final netlist, especially when reusing a layout that was designed for a differently ordered CD4040 family member.
اطلاعات انطباق
Confirm material and environmental compliance for the exact ordering code and current manufacturer documentation.