CY7C65630-56LTXAT USB 2.0 Hub Controller | Infineon
MPN: CY7C65630-56LTXAT ✓ فعالCY7C65630-56LTXAT نمای کلی
A USB hub controller is an interface integrated circuit that coordinates communication between a USB host and one or more downstream USB ports. It belongs to the broader USB interface controller family, which sits between external connectors and the system bus. The controller manages port transactions, connection behavior, and downstream-device connectivity while allowing the USB ports to operate as a controlled hub within a larger embedded or computing system.
The CY7C65630-56LTXAT is specifically associated with the EZ-USB HX2LP low-power USB 2.0 hub controller family. The manufacturer describes the related CY7C65630-56LTXC configuration as a four-port Single-TT hub configurable with GPIOs, LED indicators, and EEPROM support. The AT suffix identifies the target ordering variant used in the verified listings, while the exact electrical limits, clock requirements, port configuration options, and operating-temperature limits should be confirmed in the manufacturer documentation for the complete ordering code.
Typical use cases include USB hub expansion in industrial equipment, automotive electronics, embedded systems, printers, storage peripherals, and other USB 2.0 products. The 56-QFN surface-mount package is suitable for compact designs where board area and connector density matter. Because the controller manages multiple USB signal domains, layout should provide controlled impedance routing, short high-speed traces, solid ground-plane continuity, and appropriate placement of bypass and termination components.
The main design consideration is firmware and USB signal-integrity compatibility. Hub behavior depends on correct host enumeration, port configuration, power-management settings, and firmware initialization. Validate the complete design against the USB 2.0 electrical requirements, including differential impedance, ESD protection, connector routing, and cable or enclosure effects, rather than evaluating only the controller datasheet in isolation. This page combines the verified product identity, package information, ordering context, application guidance, and replacement considerations to support engineering selection and sourcing.
جایگزینهای drop-in برای CY7C65630-56LTXAT — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای CY7C65630-56LTXAT (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Package Type, EEPROM Support, Temperature Grade, Product Type.
CY7C65630-56LTXC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←CY7C65630-56LTXCT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←CY7C65630-56LTXA
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←CY7C65630-56LTXAT مشخصات
| Product Type | USB 2.0 hub controller |
| USB Version | USB 2.0 |
| USB Speed Support | Full-Speed and High-Speed |
| Operating Supply | 3.3 V |
| بستهبندی | 56-pin QFN (8 mm x 8 mm) |
| نوع نصب | Surface Mount |
| Number of Downstream Ports | 4 ports for the related CY7C65630-56LTXC configuration |
| Hub Topology | Single-TT for the related CY7C65630-56LTXC configuration |
| GPIO Configuration | Configurable for the related CY7C65630-56LTXC configuration |
| LED Indicator Support | Configurable for the related CY7C65630-56LTXC configuration |
| EEPROM Support | Configurable for the related CY7C65630-56LTXC configuration |
| Automotive Qualification | AEC-Q100 |
| Device Family | EZ-USB HX2LP USB 2.0 hub controller family |
راهنمای پیکربندی پین CY7C65630-56LTXAT 56-pin qfn (8 mm x 8 mm)
پیکربندی پین برای CY7C65630-56LTXAT (پکیج 56-pin qfn (8 mm x 8 mm)). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای CY7C65630-56LTXAT.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
CY7C65630-56LTXAT مناسب است برای 6 کاربردs: Automotive USB Hub, Industrial USB Expansion, Embedded USB Storage Hub, USB-to-Serial Service Interface, Medical and Diagnostic Peripheral Hub, USB Networking and Communication Gateway.
Automotive USB Hub
The CY7C65630-56LTXAT fits automotive USB hub designs requiring a compact 56-pin QFN controller and a 3.3 V operating supply. Its USB 2.0 Full-Speed and High-Speed capability allows a host connection to coexist with multiple downstream peripherals, including service interfaces, media devices, or diagnostic equipment. The AEC-Q100 listing makes it a relevant starting point for qualified vehicle electronics, although production design approval must confirm the exact temperature grade and ordering suffix. Layout should use short, impedance-controlled USB pairs, solid grounding, and ESD protection positioned near external connectors. Firmware must also validate enumeration, suspend behavior, port limits, and fault recovery under the vehicle’s power and bus conditions.
پیشنهادی
Industrial USB Expansion
The CY7C65630-56LTXAT can serve as the central interface in industrial equipment that needs multiple USB 2.0 ports and managed host communication. Its 56-pin QFN package supports compact board layouts, while the related four-port Single-TT configuration provides a practical architecture for downstream connections. This makes the controller relevant for test equipment, data acquisition systems, printers, industrial service consoles, and peripheral-control products. In an industrial enclosure, keep USB differential routing away from switching-power nodes and high-current motor paths, maintain a continuous ground plane, and provide surge and ESD protection at externally accessible connectors. Validate suspend, current-limit, brownout, and re-enumeration behavior across the complete system power profile.
پیشنهادی
Embedded USB Storage Hub
The CY7C65630-56LTXAT is appropriate for embedded systems that consolidate external storage or human-interface peripherals behind a USB 2.0 hub connection. Managed downstream ports allow the host software to enumerate each attached device independently, while GPIO and LED configurability can support port-status indication on the related family configuration. For storage equipment, place the controller and connector paths away from display converters and memory-interface switching nodes, and preserve controlled differential impedance to reduce data errors. Firmware should exercise hot-plug, overrun, suspend, and port-reset paths under sustained transfer traffic. Storage applications should also verify current budgets and thermal rise from all enabled downstream ports rather than considering USB traffic alone.
پیشنهادی
USB-to-Serial Service Interface
The CY7C65630-56LTXAT can support service equipment that exposes multiple USB connections through one upstream host port. The 56-QFN package keeps the controller compact enough for space-constrained instrumentation, while the USB 2.0 Full-Speed and High-Speed interface supports connected control, logging, or configuration peripherals. GPIO can assist with mode indication or connector-status functions where the selected family configuration enables them. Keep externally accessible USB traces away from precision analog sections, maintain connector-to-controller separation appropriate for ESD placement, and verify chassis-ground strategy to prevent surge currents from entering sensitive circuitry. Firmware should report individual port states and recover reliably after an attached device is removed or reset.
پیشنهادی
Medical and Diagnostic Peripheral Hub
The CY7C65630-56LTXAT can organize USB 2.0 peripherals in diagnostic and medical-device platforms where one host must manage several external accessories. The device’s managed hub architecture can isolate port transactions and support downstream status indication through configurable GPIO and LED functions on the related configuration. For medical equipment, retain isolation boundaries defined by the system architecture, avoid routing high-speed USB signals through isolation zones unless specifically designed for that purpose, and place protection components at connector entry points. Firmware and validation should examine enumeration failures, cable faults, sustained-current operation, and recovery after power cycling. Medical-system acceptance also requires verification of applicable safety and EMC procedures beyond the component specifications.
پیشنهادی
USB Networking and Communication Gateway
The CY7C65630-56LTXAT is suitable for communication gateways that need multiple USB 2.0 downstream links to a host processor, including adapters, service nodes, and edge equipment. The compact QFN package allows the interface to be placed close to the connector field, while controlled USB routing supports reliable high-speed communication. In a gateway, maintain uninterrupted ground references under all differential pairs, avoid impedance discontinuities at package and connector escapes, and separate USB clocks and data from switching regulators or Ethernet magnetics. Firmware should track individual port attachment, reset, and over-current events so the host can recover without destabilizing other peripherals. Validate the design with the intended cable lengths, connector types, and operating-temperature conditions.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای CY7C65630-56LTXAT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | CY7C65630-56LTXC | CY7C65630-56LTXCT | CY7C65630-56LTXA |
|---|---|---|---|---|
| Package | 56-pin QFN (8 mm x 8 mm) | 56-pin QFN (8 mm x 8 mm) | 56-pin QFN (8 mm x 8 mm) | 56-pin QFN (8 mm x 8 mm) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Type | USB 2.0 hub controller | USB 2.0 hub controller | USB 2.0 hub controller | USB 2.0 hub controller |
تفاوتهای کلیدی
- Target ordering code is explicitly identified as AEC-Q100 automotive (در مقابلCY7C65630-56LTXC)
- Confirmed 56-pin QFN package footprint (در مقابلCY7C65630-56LTXCT)
- Full-Speed and High-Speed USB 2.0 positioning (در مقابلCY7C65630-56LTXA)
یادداشتهای طراحی
Route each USB differential pair as a short, continuously coupled pair over an uninterrupted ground plane. Avoid plane splits, right-angle escapes, and stubs beneath the controller or connector. Apply the impedance and spacing values specified by the manufacturer and the board stack-up, and match USB routing rules at test points and protection-device locations. High-speed operation depends on signal integrity across the complete host-to-hub and hub-to-connector path.
Place input and output bypass capacitors close to their associated supply pins, with the exposed-pad connection following the package drawing. Preserve short return paths for supply and ground currents so switching or USB activity does not inject noise into other circuit blocks. Confirm every pin assignment, including clock and configuration inputs, against the official 56-pin QFN drawing before fabrication because the package uses dense leads.
Locate ESD or surge protection at externally accessible USB connectors and provide a deliberate return path for surge current into the system ground or chassis structure. Keep protection devices away from sensitive analog sections, and verify that their capacitance does not degrade the intended USB signal integrity. In automotive and industrial products, validate emissions and immunity with the final enclosure, cable set, power supply, and peripheral load.
اطلاعات انطباق
The target is identified as an AEC-Q100 automotive USB 2.0 hub controller. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established for the exact ordering code.