DSPIC33FJ32GP202T-I/MM - 16-bit DSC 40 MIPS 32KB Flash QFN-28 | Microchip
MPN: DSPIC33FJ32GP202T-I/MM ✓ فعالDSPIC33FJ32GP202T-I/MM نمای کلی
A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. In the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, providing deterministic single-cycle MAC/DSP instructions plus real-time control peripherals, making it the preferred choice for closed-loop control systems such as motor drives and digital power supplies.
Key features include a modified Harvard 16-bit core executing single-cycle multiply-accumulate operations, up to four high-speed analog comparators with direct output connections, a 10-bit/12-bit ADC for fast analog sampling, and high-speed PWM modules with complementary outputs and dead-time insertion. The device supports In-Circuit Serial Programming (ICSP) and debugging via dedicated PGECx/PGEDx pins.
Architecturally, the dsPIC33FJ core pairs the CPU with a zero-overhead loop, DO and REPEAT instructions, and dual address-generation units, letting a 40 MHz controller sustain filter and control-loop arithmetic typical of 32 kHz to 100 kHz switching power stages. Peripheral Pin Select routes digital peripherals to flexible I/O locations, easing PCB layout.
Typical applications include brushless DC and PMSM motor control, digital SMPS and LLC power converters, LED dimming ballasts, power-factor-correction stages, and general-purpose sensing nodes.
Design consideration: keep the ICSP trace between the programming connector and PGEC/PGED pins short, and always fit the VCAP/VDDCORE stability capacitor; omitting it causes erratic resets.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
جایگزین‌های drop-in برای DSPIC33FJ32GP202T-I/MM — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای DSPIC33FJ32GP202T-I/MM (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Core Architecture, Timers, Package, ADC, RoHS Status.
DSPIC33FJ32GP202T-H/MM
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
DSPIC33FJ32GP302T-I/MM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ64GP202T-I/MM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ128MC802-I/MM
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ16GS502-H/MM
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ12MC202-I/ML
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←DSPIC33FJ32GP202T-I/MM حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | 16-bit dsPIC33F modified Harvard, RISC |
| Maximum CPU Speed | 40 MIPS at 40 MHz |
| Program Memory (Flash) | 32 KB |
| SRAM | 2 KB |
| ولتاژ تغذیه | 3 V to 3.6 V |
| دمای کاری | -40C to +85C |
| بسته‌بندی | 28-QFN-S (6x6 mm) with exposed pad |
| نوع نصب | Surface Mount |
| I/O Ports | Up to 21 I/O on 28-pin package |
| High-Speed Comparators | Up to 4, direct output connection |
| ADC | 10-bit, high-speed, 1 Msps class |
| PWM | High-speed PWM with complementary outputs |
| Timers | Multiple 16-bit timers |
| Programming / Debug | ICSP via PGECx/PGEDx pins |
| ROM Type | Flash |
| Lifecycle Stage | Active |
| وضعیت RoHS | Lead free / RoHS compliant |
| Packaging | Tape and Reel (T suffix) |
پیکربندی پین DSPIC33FJ32GP202T-I/MM
| پین 1 | MCLR — Master clear reset, active low (also programming voltage input) |
| پین 2 | AN0/VREF+/CN2/RB0 — Analog input 0 / ADC positive reference / change notification / port B |
| پین 3 | AN1/VREF-/CN3/RB1 — Analog input 1 / ADC negative reference / change notification / port B |
| پین 4 | AN2/SS1/CN4/RB2 — Analog input 2 / SPI1 slave select / change notification / port B |
| پین 5 | AN3/INDX/CN5/RB3 — Analog input 3 / QEI index / change notification / port B |
| پین 6 | AN4/QEA/IC7/CN6/RB4 — Analog input 4 / QEI channel A / input capture 7 / port B |
| پین 7 | VDD — Positive supply (3.0 V to 3.6 V) |
| پین 8 | AN5/QEB/IC8/CN7/RB5 — Analog input 5 / QEI channel B / input capture 8 / port B |
| پین 9 | AN6/OCFA/PGD/RB6 — Analog input 6 / PWM fault A / ICSP data / port B |
| پین 10 | AN7/PGC/RB7 — Analog input 7 / ICSP clock / port B |
| پین 11 | AN8/RB8 — Analog input 8 / port B |
| پین 12 | AN9/RB9 — Analog input 9 / port B |
| پین 13 | AN10/CVREF/RB10 — Analog input 10 / comparator voltage reference output / port B |
| پین 14 | AN11/RB11 — Analog input 11 / port B |
| پین 15 | VSS — Ground reference |
| پین 16 | AN12/RB12 — Analog input 12 / port B |
| پین 17 | AN13/RB13 — Analog input 13 / port B |
| پین 18 | AN14/RB14 — Analog input 14 / port B |
| پین 19 | AN15/RB15 — Analog input 15 / port B |
| پین 20 | AVDD — Analog positive supply |
| پین 21 | AVSS — Analog ground |
| پین 22 | T1CK/RC0 — Timer 1 external clock input / port C |
| پین 23 | U1RX/SDA/RC1 — UART 1 receive / I2C data / port C |
| پین 24 | U1TX/SCL/RC2 — UART 1 transmit / I2C clock / port C |
| پین 25 | OSC1/CLKI — Oscillator crystal input / external clock input |
| پین 26 | OSC2/CLKO/RC15 — Oscillator crystal output / clock output / port C |
| پین 27 | VCAP/VDDCORE — CPU core regulator stabilizing capacitor pin (external capacitor required) |
| پین 28 | VDD — Positive supply (3.0 V to 3.6 V) |
کاربردهای معمول
DSPIC33FJ32GP202T-I/MM مناسب است برای 6 کاربردs: Brushless DC / PMSM Motor Control, Digital Switch-Mode Power Supplies, LED Lighting and Ballast Control, Industrial Sensing and Automation Nodes, Embedded Control with In-Circuit Programming, Audio and Signal Processing Front Ends.
Brushless DC / PMSM Motor Control
The DSPIC33FJ32GP202T-I/MM fits BLDC and PMSM drives because its 40 MIPS 16-bit core executes field-oriented-control arithmetic with single-cycle MAC instructions, while the high-speed PWM generates complementary outputs with programmable dead time for the three-phase inverter. The fast ADC samples phase currents and the DC bus each PWM cycle, and the up-to-four high-speed comparators give hardware cycle-by-cycle overcurrent protection that acts without CPU latency. In a typical 20-50 kHz drive, the CPU closes current loops in firmware while the comparator handles fault shutdown at nanosecond-class response. Designers should reserve the PGEC/PGED pins for ICSP debugging access and fit the mandatory VCAP capacitor on pin 27. The 32 KB flash holds sensorless or sensored control firmware with room for a bootloader.
پیشنهادی
Digital Switch-Mode Power Supplies
For digital SMPS and LLC converters, the DSPIC33FJ32GP202T-I/MM provides the high-speed PWM with dead-time insertion needed for half-bridge and full-bridge power stages, plus a fast ADC that samples output voltage and current at the switching frequency for PI control-loop closure at 40 MIPS. The integrated comparators implement hardware current limiting between PWM cycles, protecting the MOSFETs during transient faults without firmware delay. A 3.0-3.6 V rail powers the controller directly from a small bias winding or LDO, and the 6x6 mm QFN fits compact controller areas near the gate-driver circuitry. Keep ICSP traces short per Microchip data sheet 70290J so production programming does not disturb the power stage layout, and decouple VDD/VDDCORE as specified to prevent control-loop jitter.
پیشنهادی
LED Lighting and Ballast Control
In LED drivers and electronic ballasts, the DSPIC33FJ32GP202T-I/MM generates dimming PWM and phase-control waveforms from the high-speed PWM modules while the ADC monitors current and temperature feedback, supporting constant-current regulation and thermal foldback. The 40 MIPS core runs average-current-mode control loops efficiently, and the analog comparators provide fast overcurrent trip for shorted-string events. Its industrial -40C to +85C range suits enclosed luminaires and outdoor drivers, and the 32 KB flash accommodates dimming curves, DALI-style protocol handlers, and a firmware bootloader for field updates. The small 6x6 mm QFN-S package fits inside standard driver housings. Recommended practice is to route the sensitive ADC inputs away from the PWM switching nodes and use the exposed pad as a solid ground connection.
پیشنهادی
Industrial Sensing and Automation Nodes
The DSPIC33FJ32GP202T-I/MM serves as the controller in industrial sensor nodes and small automation modules, where its 40 MIPS core handles filtering and scaling of ADC samples, the multiple 16-bit timers coordinate sampling and communication timing, and Peripheral Pin Select routes UART or other digital functions to the most convenient pins for the PCB. The up-to-four high-speed comparators implement window or threshold alarms in hardware, offloading the CPU. With 32 KB flash and 2 KB SRAM, it hosts protocol stacks and calibration routines while retaining margin, and industrial -40C to +85C operation suits factory-floor cabinets. Power comes from a clean 3.3 V rail; designers should use a solid ground plane on the exposed pad and keep analog inputs on AN0-AN15 short and filtered for measurement accuracy.
پیشنهادی
Embedded Control with In-Circuit Programming
For products requiring field or production-line firmware updates, the DSPIC33FJ32GP202T-I/MM supports In-Circuit Serial Programming and debugging through its dedicated PGECx/PGEDx pins, allowing the flash to be reprogrammed while soldered to the board. Microchip data sheet 70290J explicitly recommends keeping ICSP traces short, which simplifies bed-of-nails programming fixtures and reduces signal-integrity risk during programming. The 32 KB flash supports a small bootloader plus application image, enabling field upgrades over UART. The mandatory VCAP capacitor on the VDDCORE pin must be fitted close to pin 27 for reliable erase/write cycles. Development tooling includes MPLAB X IDE, the XC16 compiler, PICkit and ICD programmers, and the Explorer 16/32 board with a device PIM, so a complete low-cost toolchain supports prototyping through production.
پیشنهادی
Audio and Signal Processing Front Ends
The DSPIC33FJ32GP202T-I/MM can act as a compact DSP engine for audio front ends and acoustic sensing, executing FIR/IIR filters with single-cycle DSP multiply-accumulate instructions at 40 MIPS, enough for low-channel-count real-time processing. The high-speed ADC digitizes microphone or line-level signals (with external front-end conditioning), and the comparators provide fast threshold detection for acoustic event flags. Its 6x6 mm QFN-S footprint and 3.3 V single-supply operation simplify integration into compact mixed-signal boards alongside codec or amplifier stages. With 32 KB flash, filter coefficient tables and signal-chain firmware fit with margin, and 2 KB SRAM supports moderate block-based processing. Keep the analog ground return on the exposed pad quiet and separate PWM switching current from the ADC reference path to preserve signal-to-noise performance.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای DSPIC33FJ32GP202T-I/MM — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | DSPIC33FJ32GP202T-H/MM | DSPIC33FJ32GP302T-I/MM | DSPIC33FJ64GP202T-I/MM | DSPIC33FJ128MC802-I/MM | DSPIC33FJ16GS502-H/MM | DSPIC33FJ12MC202-I/ML |
|---|---|---|---|---|---|---|---|
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 32 KB | 32 KB | 32 KB | 64 KB | 128 KB | 16 KB | 12 KB |
| CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS class | 40 MIPS |
| Operating Temperature | -40C to +85C (I grade) | -40C to +125C (H grade) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
تفاوت‌های کلیدی
- Extended-temperature drop-in sibling available (در مقابلDSPIC33FJ32GP202T-H/MM)
- CAN-capable upgrade in the same footprint (در مقابلDSPIC33FJ32GP302T-I/MM)
- Balanced flash-to-cost point in a 32KB-class family (در مقابلDSPIC33FJ64GP202T-I/MM)
یادداشت‌های طراحی
Solder the exposed pad of the 28-QFN-S to a grounded copper pour with an array of thermal vias; this pad is the primary ground return for the digital core, and a floating pad causes erratic analog performance and EMI. Decouple both VDD pins (7, 28) and AVDD (20) with 0.1 uF ceramics placed within 2 mm of each pin, plus one bulk 4.7-10 uF per rail. Keep the analog ground island tied to the exposed pad at a single point.
The VCAP/VDDCORE pin (27) requires its external stabilizing capacitor for the internal core regulator - omitting it is the most common cause of random resets on dsPIC33FJ boards. Also keep ICSP traces between the programming header and PGEC/PGED pins short, as Microchip data sheet 70290J recommends, and do not load the MCLR pin with large capacitance that slows reset response. Avoid using VDDCORE as an external supply rail.
When using the ADC on AN0-AN15, route PWM and gate-driver traces away from analog inputs and use the AVDD/AVSS pins as a quiet analog supply with an RC or ferrite filter from the digital 3.3 V rail. Comparator inputs used for cycle-by-cycle current limiting should be Kelvin-connected at the current-sense resistor so switching noise does not cause false trips. Peripheral Pin Select lets you move digital functions to pins far from noisy nodes - exploit this during layout instead of fixing noise in firmware.
Estimated: at 40 MIPS the dsPIC33FJ core typically draws on the order of tens of milliamps from the 3.3 V rail (tens-to-low-hundreds of microwatts per MHz class); budget roughly 150-250 mW worst case and verify with Microchip's power estimation tool in MPLAB X for your exact clock configuration. Size the 3.3 V regulator with 2x margin for I/O source current driving LEDs or gate-driver inputs, and power AVDD through an RC filter to improve ADC accuracy.
اطلاعات انطباق
Lead free / RoHS compliant per yic-electronics listing and Microchip product data. REACH, halogen-free, and conflict-minerals status not stated in verified data.
