EP2C15AF484C7N - 14,448 LEs Cyclone II FPGA | Intel
MPN: EP2C15AF484C7N ✗ پایان تولیدEP2C15AF484C7N نمای کلی
A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose configurable logic blocks, memory resources, and input/output blocks are interconnected through a configurable fabric. The FPGA category sits between fixed-function logic ICs and software-programmable processors: engineers can implement digital functions in hardware while retaining the flexibility to revise logic, interfaces, and system behavior through programmable configuration data.
The EP2C15AF484C7N provides 14,448 logic elements in a compact 484-BGA package. Its listed maximum frequency of 402.58 MHz makes it suitable for control logic, protocol handling, signal conditioning, and embedded datapaths that require deterministic parallel processing. The 90 nm fabrication process and 1.2 V operating supply place the device in the classic Cyclone II generation of low-cost FPGAs.
The 484-BGA package supports dense board-level integration while presenting demanding escape-routing, via-in-pad, soldering, and inspection requirements. Because the device uses a large leadless package, PCB design must follow the manufacturer's ball-grid layout and power-decoupling guidance closely. Differential-pair routing, plane continuity, and thermal-via distribution are particularly important for reliable operation.
Typical applications include industrial control systems, communications interfaces, data acquisition, embedded instrumentation, and legacy platform control. The device can also serve as a hardware companion to processors in applications requiring parallel logic, specialized I/O handling, or programmable timing. Before placing it in a new design, verify the required configuration device, board constraints, and signal-development tools.
The main design trade-off is legacy-device availability against system flexibility. The programmable fabric supports design changes, but an older FPGA requires careful component planning and validation of its configuration, clocking, and mixed-signal implementation. Confirm supply status before committing a production board.
This page consolidates the device identity, core capacity, speed, package, electrical characteristics, replacement considerations, and practical design guidance into an engineering-focused reference for evaluating the EP2C15AF484C7N.
جایگزینهای drop-in برای EP2C15AF484C7N — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EP2C15AF484C7N (همان فرمفاکتور و فوتپرینت) — متفاوت در Mounting Type.
EP2C15F484C7N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C15F484C6N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C15F484C8N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C15F484I7N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C15AF484C7N حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | FPGA |
| FPGA Family | Cyclone II |
| Logic Elements | 14,448 LE |
| Maximum Operating Frequency | 402.58 MHz |
| Fabrication Process | 90 nm |
| Core Supply Voltage | 1.2 V |
| Package Type | 484-BGA |
| تعداد پایه | 484 pins |
| دمای کاری | 0 °C to +85 °C |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین EP2C15AF484C7N 484-bga
پیکربندی پین برای EP2C15AF484C7N (پکیج 484-bga). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EP2C15AF484C7N.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EP2C15AF484C7N مناسب است برای 6 کاربردs: Industrial Control and Automation, Communications Interface, Data Acquisition and Signal Processing, Embedded Instrumentation, Programmable Interface Consolidation, Video and Display Timing Control.
Industrial Control and Automation
The EP2C15AF484C7N fits embedded machine-control logic that requires deterministic parallel processing in a compact programmable device. Its 14,448 logic elements can implement sequencing, interlocks, encoder interfaces, state machines, and communications control, while the listed 402.58 MHz maximum frequency provides useful timing headroom for moderate-speed control paths. The 484-BGA package supports integration on a multilayer PCB when the design includes adequate power planes, thermal vias, and controlled BGA assembly. For factory equipment, the listed 0 °C to +85 °C range can suit indoor industrial environments, but enclosure temperature, vibration, and availability should be reviewed before production release.
پیشنهادی
Communications Interface
The EP2C15AF484C7N can implement protocol framing, packet filtering, buffering, and interface adaptation in communications equipment. Its programmable fabric supports parallel datapaths and state-machine logic, and the listed 402.58 MHz operating frequency allows multiple fast state transitions under suitable timing constraints. The device is especially relevant where a fixed serial transceiver is insufficient or where multiple low-speed interfaces must be consolidated. A complete design must account for transceiver characteristics, impedance-controlled routing, clocking, and the I/O-standard assignments listed in the Cyclone II documentation. The 1.2 V core architecture also makes rail sequencing and power budgeting essential.
پیشنهادی
Data Acquisition and Signal Processing
The EP2C15AF484C7N is suitable for digital data acquisition when the acquisition path requires programmable sampling control, digital filtering, and data packing. Its 14,448 logic elements can host parallel datapaths, counters, trigger logic, and interface state machines, while the listed 402.58 MHz maximum frequency supports moderate-rate real-time processing. Engineers can partition the design between configurable logic and any on-chip memory resources identified in the device documentation. Signal integrity remains a board-level concern: analog front-end layout, clock jitter, isolation between sensitive inputs, and synchronized data capture can dominate overall accuracy. The 484-BGA outline also demands dense escape routing and careful decoupling around the 1.2 V core supply.
پیشنهادی
Embedded Instrumentation
The EP2C15AF484C7N can serve as the programmable control core in test and measurement equipment that needs custom sequencing, trigger generation, and instrument-bus management. Its 14,448 logic elements provide capacity for control logic, status registers, and data-format conversion, while the listed 402.58 MHz maximum frequency supports high-speed digital state management. A laboratory instrument can use the FPGA to coordinate ADC or DAC interfaces, memory operations, and front-panel commands without relying entirely on a microprocessor. Design attention should focus on clock distribution, low-noise analog rails, grounded return paths, and isolation between sensitive measurement circuits and digital switching activity. Timing closure must be based on the implemented clock domains and I/O timing constraints.
پیشنهادی
Programmable Interface Consolidation
The EP2C15AF484C7N is useful when a product must replace several fixed-function logic devices with one configurable implementation. Its 14,448 logic elements can consolidate parallel interfaces, command decoders, timers, and glue logic while preserving the option to revise the design before production. The programmable architecture reduces the risk of late pin-routing changes, but it introduces configuration-memory, tool, and software-update requirements. The 484-BGA package offers a high pin count for interface expansion, yet it requires a multilayer PCB with careful BGA fanout and assembly controls. Designers should confirm supported I/O standards, configuration methods, and clock resources in the exact device tables before assigning every external interface.
پیشنهادی
Video and Display Timing Control
The EP2C15AF484C7N can implement programmable timing, pixel positioning, test-pattern generation, and display-interface control in legacy display equipment. Its 14,448 logic elements allow timing counters, synchronization logic, and data-path control to be combined in one device, and its listed 402.58 MHz maximum frequency is suitable for many synchronous digital timing functions. For LCD or other display interfaces, the exact electrical standard and supported I/O mode must be verified in the Cyclone II documentation. Board implementation should use controlled-impedance routing, matched data-group geometry, and uninterrupted reference planes where required. The 484-BGA package can simplify fanout compared with a large leaded device but raises solder and inspection requirements during manufacturing.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EP2C15AF484C7N — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EP2C15F484C7N | EP2C15F484C6N | EP2C15F484C8N | EP2C15F484I7N |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 484-BGA | 484-BGA - same | 484-BGA - same | 484-BGA - same | 484-BGA - same |
| FPGA Family | Cyclone II | Cyclone II | Cyclone II | Cyclone II | Cyclone II |
| Logic Elements | 14,448 LE | 14,448 LE | 14,448 LE | 14,448 LE | 14,448 LE |
| Speed Grade | -7 | -7 - same | -6 - lower | -8 - higher | -7 - same speed grade |
| Maximum Operating Frequency | 402.58 MHz | 402.58 MHz | Approximately 300 MHz | Approximately 500 MHz | 402.58 MHz |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Fabrication Process | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
تفاوتهای کلیدی
- Higher clock capability than the lower speed grade (در مقابلEP2C15F484C6N)
- Lower maximum frequency than the -8 option (در مقابلEP2C15F484C8N)
- Explicit commercial temperature range (در مقابلEP2C15F484I7N)
یادداشتهای طراحی
Follow the manufacturer’s 484-BGA escape-routing pattern rather than improvising a via arrangement. Preserve access to all device balls through the first two routing layers, maintain the recommended ball-pitch fanout geometry, and avoid placing test points or tall components where they can interfere with rework tooling. Validate signal-layer transitions with the PCB fabricator because each layer change in a dense escape path can introduce impedance discontinuities.
Implement the 1.2 V core rail as a low-impedance distribution network with local decoupling placed according to the Cyclone II layout guidance. Separate core and I/O supply routing where the device documentation specifies different requirements, and use multiple connections between planes and the device area. Check startup current, voltage tolerances, power sequencing, and the complete I/O current budget before selecting regulators and magnetics.
The 484-BGA package concentrates heat beneath the device, so thermal performance depends on solid power and ground planes, via distribution, and controlled copper in both board directions. Use the manufacturer’s thermal data and the actual board construction for junction-temperature assessment. Estimated: junction rise equals power dissipation multiplied by the effective board-and-package thermal resistance; do not substitute a generic via count without considering copper area and airflow.
Do not infer exact pin compatibility from the shared 484-BGA outline alone. Compare the complete ordering codes, speed grade, temperature grade, configuration method, I/O assignments, power pins, and package-ball map in the device tables. After replacement, rerun synthesis, place-and-route, timing analysis, pin assignment, and configuration tests; a mechanically identical package can still require design-level verification.
Route clocks and high-speed interfaces over continuous reference planes with minimized stubs and through transitions. Apply device-specific I/O timing constraints even when the logic itself appears simple, and check board-level skew for source-synchronous interfaces. Because the device is implemented on a 90 nm process, external memory and transceiver timing margins should be reviewed rather than inferred solely from the listed 402.58 MHz maximum frequency.
اطلاعات انطباق
No specific compliance declarations are listed for the EP2C15AF484C7N in the manufacturer-family or component information. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer for the exact ordering code and shipment configuration.