EP2C20AF484A7N - 18,752-Cell 90 nm FPGA | Altera | Automotive
MPN: EP2C20AF484A7N ✓ فعالEP2C20AF484A7N نمای کلی
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel control logic, interfaces, signal processing, and protocol handling in one reconfigurable device. Its high I/O count and embedded memory also make it suitable for systems requiring several independent data paths.
The EP2C20AF484A7N provides 18,752 logic cells, 315 I/O, and 239,616 bits of embedded memory for the Cyclone II architecture. Its listed maximum frequency of 402.58 MHz supports moderate clock rates, while the 1.2 V core supply reduces power requirements in compact embedded systems. The 484-ball BGA package provides a dense surface-mount interface, although its fine ball pitch complicates inspection, assembly, and prototype rework. The automotive temperature designation supports applications where operating conditions extend beyond ordinary commercial environments.
Technical suitability depends on the target clock, I/O standards, memory interface, pin assignment, and available logic and routing resources. Because this device belongs to the mature Cyclone II generation, engineers should preserve the original Quartus project, pin constraints, and programming file when maintaining an existing platform. Legacy intellectual property, software models, and development tools may also require version-compatible environments. The BGA package demands careful pad layout, reflow control, and inspection to obtain reliable assembly yield.
Typical uses include industrial control systems, automotive electronics, communications infrastructure, embedded signal processing, and test equipment. The 315 available I/O allow numerous external connections, while the embedded memory supports buffering, packet handling, and local data storage. For low-pin-count designs, a smaller-package member of the Cyclone II family may reduce board area; for designs needing greater logic capacity or faster performance, another family member may be more appropriate. Device selection should therefore be based on verified resource utilization rather than the maximum device rating alone.
A critical design step is to compile the complete design for the exact EP2C20AF484A7N speed, temperature, and package selections before PCB release. Verify the pinout, differential I/O requirements, power rails, decoupling, configuration pins, clock inputs, and JTAG connections against the manufacturer datasheet. Check assembly capability against the 484-BGA geometry, and perform continuity, boundary-scan, and functional tests after board fabrication.
This page combines the available device parameters, source links, application guidance, and package-aware engineering considerations with a structured assessment of likely drop-in alternatives. It is intended to accelerate engineering review while preserving the importance of device-specific configuration, qualification, assembly, and lifecycle verification.
جایگزینهای drop-in برای EP2C20AF484A7N — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EP2C20AF484A7N (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Logic Elements, Programmable Logic Type.
EP2C20AF484C7N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C20AF484I7N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C20AF484C8N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C20AF484I8N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP2C20AF484A8N
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
EP2C20AF484A7N حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Cyclone II field-programmable gate array (FPGA) |
| Logic Elements | 18,752 cells |
| Embedded Memory | 239,616 bits |
| I/O Count | 315 I/O |
| Maximum Frequency | 402.58 MHz |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| بستهبندی | 484-pin FBGA |
| Ball Count | 484 balls |
| Terminal Type | Ball |
| Package Shape | Square |
| نوع نصب | Surface mount |
| Temperature Grade | Automotive |
| Automotive Qualification | AEC-Q100 |
| Programmable Logic Type | SRAM-configured programmable logic |
راهنمای پیکربندی پین EP2C20AF484A7N square
پیکربندی پین برای EP2C20AF484A7N (پکیج square). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EP2C20AF484A7N.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EP2C20AF484A7N مناسب است برای 6 کاربردs: Automotive Electronic Control Units, Industrial PLC and Automation Controllers, Communications and Network Interface Equipment, Embedded Signal and Data Processing, Instrumentation and Test Equipment, Secure Industrial and Automotive Gateways.
Automotive Electronic Control Units
The EP2C20AF484A7N fits vehicle electronic control units that require programmable logic alongside numerous peripheral connections. Its 18,752 logic elements and 239,616 bits of embedded memory provide capacity for state machines, sensor conditioning logic, communication routing, and fault-management functions. The 315 I/O allow dense integration of switches, sensors, actuators, and vehicle-network interfaces without moving all logic into multiple fixed-function devices. The automotive grade and AEC-Q100 designation are important for harsh-temperature programs, although the final ECU must still pass its own environmental, EMC, and functional-safety validation.
پیشنهادی
Industrial PLC and Automation Controllers
The EP2C20AF484A7N is suitable for compact programmable logic controllers and factory automation modules requiring many digital endpoints. Its 18,752 logic elements can implement multiple parallel control channels, while the listed 402.58 MHz maximum frequency supports moderate-speed timing and communication functions. With 315 I/O, a controller can connect field inputs, relay or transistor drivers, status indicators, and industrial interfaces. Designers should partition timing-critical logic, use the embedded memory for deterministic buffering, and verify that the selected I/O standards and voltage levels match the factory equipment.
پیشنهادی
Communications and Network Interface Equipment
The EP2C20AF484A7N can support communications equipment requiring parallel data processing, protocol conversion, framing, and control. Its 315 I/O provide substantial connectivity for parallel buses, status signals, clocks, and chip-to-chip interfaces, while the 239,616 bits of embedded memory offer local storage for packet buffers or dual-clock crossing structures. A system architect can implement multiple finite-state machines and data paths concurrently. Timing closure remains the main constraint, so clock-domain boundaries, I/O timing constraints, and the available routing resources must be checked in the Quartus compilation.
پیشنهادی
Embedded Signal and Data Processing
The EP2C20AF484A7N offers sufficient configurable logic for parallel signal-processing, sampling control, filtering, and data-format conversion applications. The architecture's 18,752 logic elements allow pipelines and arithmetic functions to be mapped in parallel, while embedded memory can store coefficients, sample windows, or intermediate results. The listed 402.58 MHz maximum frequency provides a useful performance ceiling but does not guarantee that a complete design will achieve that rate. Designers must evaluate pipeline depth, routing congestion, clock uncertainty, and resource utilization for the actual algorithm.
پیشنهادی
Instrumentation and Test Equipment
The EP2C20AF484A7N is adaptable to instrumentation and automated test equipment that must coordinate many sensors, digitizers, and measurement peripherals. Its large I/O count allows acquisition channels, triggers, range-control signals, and communication ports to share one programmable device. Logic elements and embedded memory can implement channel sequencing, calibration tables, and data-path control. For laboratory or service equipment, the automotive qualification provides additional environmental margin, but the design still needs appropriate protection, isolation, grounding, and calibration architecture outside the FPGA.
پیشنهادی
Secure Industrial and Automotive Gateways
The EP2C20AF484A7N can serve as the programmable control core of a gateway that coordinates sensors, local storage, and multiple communications links. The 18,752 logic elements can support protocol translation, access control, command parsing, and supervisory logic, while 315 I/O leave room for status, alarm, and recovery signals. Because programmable devices require careful configuration protection and manufacturing control, developers should use appropriate JTAG access, configuration-file verification, and secure update procedures. The automotive-grade designation is useful for vehicle gateways, but system security validation remains independent of the FPGA's qualification.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EP2C20AF484A7N — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EP2C20AF484C7N | EP2C20AF484I7N | EP2C20AF484C8N | EP2C20AF484I8N | EP2C20AF484A8N |
|---|---|---|---|---|---|---|
| Package | 484-FBGA | 484-FBGA | 484-FBGA | 484-FBGA | 484-FBGA | 484-FBGA |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Temperature Grade | Automotive | Commercial | Industrial | Commercial | Industrial | Automotive |
| Automotive Qualification | AEC-Q100 | Not AEC-Q100 designated | Not AEC-Q100 designated | Not AEC-Q100 designated | Not AEC-Q100 designated | AEC-Q100 |
| Speed Grade | 7 | 7 | 7 | 8 | 8 | 8 |
| Logic Elements | 18,752 cells | 18,752 cells | 18,752 cells | 18,752 cells | 18,752 cells | 18,752 cells |
| I/O Count | 315 I/O | 315 I/O | 315 I/O | 315 I/O | 315 I/O | 315 I/O |
| Embedded Memory | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
تفاوتهای کلیدی
- Automotive-qualified option with dense I/O (در مقابلEP2C20AF484C7N)
- Preserves automotive qualification when changing speed grade (در مقابلEP2C20AF484I8N)
- Same-package migration path with unchanged 484-ball geometry (در مقابلEP2C20AF484A8N)
یادداشتهای طراحی
اطلاعات انطباق
The part is identified as automotive with AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or supplier declaration.