EP3CLS70U484C7 - Cyclone III LS FPGA 70K LE UFBGA-484
MPN: EP3CLS70U484C7 ✓ فعالEP3CLS70U484C7 نمای کلی
A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as memory blocks, DSP blocks, and high-speed transceivers. FPGAs sit in the broader programmable logic device (PLD) hierarchy, alongside CPLDs, and are positioned between fixed-function ASICs and software-driven microcontrollers for applications requiring hardware parallelism, deterministic latency, and post-production flexibility. The Cyclone III LS family specifically optimizes for low static and dynamic power, making it the lowest-power member of the Cyclone III generation.
Key features of the EP3CLS70U484C7 include 70,208 logic elements, approximately 3.07 Mbits of embedded RAM, dedicated 18x18 multipliers for DSP, and 4 phase-locked loops (PLLs) for clock management. The 484-ball UFBGA package provides 278 usable user I/Os and a compact 19 mm x 19 mm body, suitable for space-constrained boards. The LS variant adds dedicated security and anti-tamper features, including configuration bitstream encryption and JTAG security, which distinguishes it from the standard Cyclone III family.
Technically, the device supports multiple I/O standards (LVTTL, LVCMOS, SSTL, HSTL, LVDS, and PCI), on-chip termination (OCT), and hot-socketing capability, allowing live insertion into backplane systems. The 65 nm process, combined with an efficient clock network and low-leakage transistors, reduces total power consumption by up to 50% compared to earlier 90 nm Cyclone II devices.
Typical applications include industrial motor control, video processing pipelines, low-cost test and measurement equipment, communications protocol bridging, and portable or battery-powered embedded systems. The anti-tamper features make the LS family particularly attractive for defense, secure communications, and industrial control designs requiring bitstream confidentiality.
When designing with this FPGA, ensure adequate power decoupling (typically 100 nF and 10 uF bulk caps per supply rail), follow Intel's recommended PCB layout guidelines for BGA packages, and use the Quartus II design software for synthesis, place-and-route, and configuration bitstream generation. Verify that your chosen configuration mode (AS, PS, JTAG, or FPP) is supported by the U484 device variant.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a consolidated reference for sourcing and substitution decisions.
جایگزین‌های drop-in برای EP3CLS70U484C7 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای EP3CLS70U484C7 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Process Technology, Operating Temperature, Embedded Memory, Logic Elements.
EP3CLS100U484C7
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP3CLS100U484C7N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP3CLS70F484C7
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP3CLS70F484C7N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP3C80U484C7
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP3C80U484C7N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP3C55U484C7
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP3CLS70U484C7 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Family | Cyclone III LS |
| Logic Elements | 70,208 |
| Embedded Memory (bits) | 3,068,928 |
| User I/O Count | 278 |
| بسته‌بندی | 484-ball UFBGA (U484, 19x19 mm) |
| Core Supply Voltage | 1.2 V |
| Process Technology | 65 nm low-power CMOS |
| Maximum Internal Frequency | 437.5 MHz |
| PLLs | 4 |
| Global Clock Networks | 20 |
| Configuration Schemes | AS, PS, JTAG, FPP |
| دمای کاری | 0C to +85C (commercial, C7 speed grade) |
| Speed Grade | 7 |
| وضعیت RoHS | Compliant |
| نوع نصب | Surface Mount (BGA) |
| سطح MSL | 3 |
راهنمای پیکربندی پین EP3CLS70U484C7 484-ball ufbga (u484, 19x19 mm)
پیکربندی پین برای EP3CLS70U484C7 (پکیج 484-ball ufbga (u484, 19x19 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای EP3CLS70U484C7.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
EP3CLS70U484C7 مناسب است برای 6 کاربردs: Industrial Motor Control, Video Processing Pipelines, Low-Cost Test and Measurement, Communications Protocol Bridging, Portable / Battery-Powered Embedded Systems, Secure Defense and Industrial Control.
Industrial Motor Control
The EP3CLS70U484C7 fits industrial motor control designs due to its 437.5 MHz maximum internal frequency, dedicated 18x18 multipliers for Park/Clark transforms and PID loops, and 278 user I/Os supporting LVDS encoder feedback and SSTL memory interfaces. The Cyclone III LS low-power architecture reduces thermal dissipation in sealed IP65 enclosures, while the 65 nm process keeps junction temperatures within industrial 0C to +85C operating limits. Four on-chip PLLs allow precise generation of PWM carrier frequencies and resolver excitation signals. The dedicated security features (bitstream AES encryption) protect proprietary motor-control firmware from reverse engineering, a critical requirement in competitive servo-drive markets.
پیشنهادی
Video Processing Pipelines
The EP3CLS70U484C7 enables real-time video processing at resolutions up to 1080p60 thanks to its 70,208 logic elements and 3.07 Mbits of embedded RAM, sufficient for line buffers, frame buffers, and intermediate pixel-domain storage. The 278 I/Os support parallel CMOS camera interfaces (typically 16-24 bits at 148.5 MHz for HD-SDI) and BT.656 / BT.1120 streaming inputs. Embedded 18x18 multipliers accelerate 2D FIR filters, scaling kernels, and color-space conversion (RGB to YCbCr). The LS variant's bitstream encryption protects licensed video codec IP (H.264 baseline, MJPEG) embedded in the fabric, valuable for surveillance OEMs.
پیشنهادی
Low-Cost Test and Measurement
The EP3CLS70U484C7 is well-matched to mid-range test and measurement instruments such as data loggers, protocol analyzers, and logic analyzers with up to 200 channels. The 70K logic elements accommodate complex trigger sequencers and protocol decode state machines, while the 278 I/Os provide sufficient channels for mixed-signal probing. PLLs generate precise sample clocks from 1 kHz to over 400 MHz. The low-power 65 nm process enables fanless benchtop instrument designs. Cyclone III LS security protects proprietary calibration constants and measurement IP from extraction, important for ISO 17025 accredited calibration laboratories.
پیشنهادی
Communications Protocol Bridging
The EP3CLS70U484C7 excels at industrial communications bridging between protocols such as EtherCAT, PROFINET, CANopen, Modbus TCP, and serial interfaces, leveraging its 70K logic elements and 3.07 Mbits of embedded memory for frame buffering. The four PLLs allow independent clock domains for each protocol stack. The 278 I/Os support multiple MII/RGMII Ethernet PHYs, SPI flashes, UART transceivers, and CAN-FD controllers in parallel. The Cyclone III LS bitstream encryption protects OEM protocol firmware stacks from cloning, critical for industrial gateway vendors competing against reference designs.
پیشنهادی
Portable / Battery-Powered Embedded Systems
The EP3CLS70U484C7's 65 nm low-power process and Cyclone III LS architecture deliver up to 50% lower static power than the prior 90 nm Cyclone II generation, making it suitable for handheld instruments, portable medical devices, and battery-powered field equipment. The 70K logic elements support complete system-on-chip integration including processor soft-cores (Nios II), custom peripherals, and signal processing pipelines in a single device. The compact 19x19 mm U484 BGA package suits space-constrained handheld form factors. Hot-socketing capability simplifies battery-pack hot-swap designs.
پیشنهادی
Secure Defense and Industrial Control
The EP3CLS70U484C7 targets defense, aerospace, and critical infrastructure applications requiring bitstream confidentiality and tamper resistance. The Cyclone III LS family adds AES-128/256 bitstream encryption, JTAG port disable, and tamper-detection pins, all absent in the standard Cyclone III line. The 70K logic elements support encryption accelerators, secure boot logic, and command-authentication state machines for SCADA and secure communications systems. The 65 nm process and 278 I/Os in the U484 package enable system consolidation while maintaining cryptographic isolation between security domains.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای EP3CLS70U484C7 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | EP3CLS100U484C7 | EP3CLS100U484C7N | EP3CLS70F484C7 | EP3CLS70F484C7N | EP3C80U484C7 | EP3C80U484C7N | EP3C55U484C7 |
|---|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | UFBGA-484 (U484) | UFBGA-484 (U484) - same | UFBGA-484 (U484) - same | FBGA-484 (F484) - pin-compatible | FBGA-484 (F484) - pin-compatible | UFBGA-484 (U484) - same | UFBGA-484 (U484) - same | UFBGA-484 (U484) - same |
| Logic Elements | 70,208 | 100,448 | 100,448 | 70,208 | 70,208 | 81,264 | 81,264 | 55,856 |
| Embedded Memory (bits) | 3,068,928 | 4,437,888 | 3,068,928 | 2,810,880 | 2,396,160 | |||
| User I/O Count | 278 | 278 | 278 | 278 | 278 | |||
| Family / Security | Cyclone III LS (security) | Cyclone III LS (security) | Cyclone III LS (security) | Cyclone III (standard) | Cyclone III (standard) | |||
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | |||
| Temperature Grade | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) |
تفاوت‌های کلیدی
- Embedded security features not present in standard Cyclone III (در مقابلEP3C80U484C7)
- Higher logic density at same price tier vs standard Cyclone III (در مقابلEP3C55U484C7)
- Pin-compatible with 100K LE upgrade path (در مقابلEP3CLS100U484C7)
یادداشت‌های طراحی
Decouple each power pin (VCCINT, VCCA, VCCD_PLL, VCCIO banks 1-8) with 100 nF ceramic caps placed within 100 mils of the respective ball. Add 10 uF bulk caps at each supply rail entry point. Estimated: at 50% toggle rate and typical utilization, total core current is approximately 500-800 mA at 1.2 V; budget 1.5 A per rail during in-rush. Use a TI TPS7A4701 or equivalent LDO for the analog VCCA rail to minimize PLL jitter.
BGA-484 with 1.0 mm pitch requires 4-6 layer PCB stackup with microvia or via-in-pad construction for inner-row ball escape. Use Intel's recommended Cyclone III board design guidelines for layer stackup, impedance control (50 ohm single-ended, 100 ohm differential), and length matching. Estimated: 4 mil trace/space with 8 mil drill microvias achieves clean breakout from inner balls. Apply solder mask defined (SMD) pads for better joint reliability.
Do not leave MSEL[0..3] pins floating; strap them to VCCIO or GND via 10 kohm resistors to select the configuration mode (AS, PS, JTAG, FPP). The CONFIG_DONE, nSTATUS, and nCONFIG pins require external 10 kohm pull-ups to VCCIO. Cyclone III LS security requires MSEL configuration matching the expected bitstream encryption mode, or the device will fail to configure. Verify all JTAG pins (TCK, TMS, TDI, TDO) are routed with impedance-controlled traces if JTAG programming is used in production.
At maximum utilization (70K LE, 50% toggle, 437 MHz), estimated power dissipation is approximately 1.5-2 W. The UFBGA-484 with standard JEDEC JESD51 test board achieves theta_JA around 15-20 C/W. Ensure adequate airflow or thermal vias under the package center pad for reliable operation in sealed enclosures. For commercial 0C to +85C ambient, junction temperature must stay below 100C per Intel's reliability derating curves.
اطلاعات انطباق
RoHS compliant per Intel Cyclone III product family documentation. Lead-free finish per UFBGA package. REACH compliance should be confirmed with Intel for EU-bound shipments. AEC-Q100 not applicable (FPGA not automotive-qualified). Industrial temperature variants (I7 suffix) available separately for harsh-environment designs.
