EP4CE10F17C8LN - 10,320 Logic Element FPGA | Altera
MPN: EP4CE10F17C8LN ✓ فعالEP4CE10F17C8LN نمای کلی
A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic blocks, embedded memory, and configurable input/output resources. The Cyclone IV E family occupies the FPGA category within programmable logic devices and targets cost-sensitive embedded systems requiring flexible parallel processing, interface adaptation, and hardware acceleration without application-specific mask fabrication.
The EP4CE10F17C8LN uses 60 nm process technology and provides 179 configurable I/O positions according to distributor product data. Its 256-terminal package uses a 1 mm ball pitch, supporting compact board layouts while providing high-density I/O access. The device combines 10,320 logic elements with 414 Kb of block RAM, allowing moderate amounts of parallel logic, data buffering, lookup tables, and state-machine functions to be implemented on one device.
The F17 package designation identifies the 17 mm by 17 mm FBGA outline. The commercial-temperature suffix supports operation from 0°C to 85°C, while the lead-free construction is identified in product specifications. These characteristics make the device appropriate for industrial control, communications, instrumentation, embedded processing, and general-purpose programmable-logic designs where a 256-ball footprint is acceptable and the logic capacity matches the design requirement.
Typical uses include parallel data acquisition, protocol bridging, motor and motion control, programmable instrumentation, sensor aggregation, and low-cost embedded control. Engineers can implement multiple finite-state machines, buffer data between subsystems, accelerate repetitive operations, or customize I/O behavior. Designs requiring substantially more logic, memory, clock resources, high-speed transceivers, or user-programmable RAM should use a larger FPGA rather than force the EP4CE10F17C8LN beyond its resource limits.
Power, decoupling, clocking, and configuration determine whether the device operates reliably. Follow the manufacturer’s recommended power-supply topology, place decoupling capacitors close to the relevant supply pins, provide a clean clock source, and verify JTAG configuration and I/O standards against the board-level design. The 1 mm-pitch FBGA also requires careful PCB design, including appropriate pad geometry, solder mask, thermal relief, and assembly process control.
This product overview combines the manufacturer ordering information, package and electrical specifications, resource details, strict same-footprint alternatives, and practical implementation guidance to support component selection, PCB planning, and sourcing decisions.
جایگزینهای drop-in برای EP4CE10F17C8LN — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EP4CE10F17C8LN (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Device Type, Process Technology, Embedded Memory, User I/O.
EP4CE10F17C8N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP4CE10F17C8L
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP4CE10F17C8N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP4CE10F17C9LN
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP4CE10F17C8LN حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Logic Elements | 10,320 elements |
| Logic Blocks | 47 blocks |
| Embedded Block RAM | 414 Kb |
| Process Technology | 60 nm |
| Core Supply Voltage | 1.2 V |
| FPGA Supply Voltage | 1 V nominal |
| Minimum FPGA Supply Voltage | 0.97 V |
| Maximum FPGA Supply Voltage | 1.03 V |
| دمای کاری | 0°C to 85°C |
| بستهبندی | 256-terminal F17 FBGA, 17 mm × 17 mm |
| Package Ball Pitch | 1 mm |
| Terminal Count | 256 terminals |
| I/O Count | 179 I/O |
| نوع نصب | Surface mount |
| Lead-Free Construction | Yes |
راهنمای پیکربندی پین EP4CE10F17C8LN 1 mm
پیکربندی پین برای EP4CE10F17C8LN (پکیج 1 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EP4CE10F17C8LN.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EP4CE10F17C8LN مناسب است برای 6 کاربردs: Industrial Control and Automation, Programmable Data Acquisition, Protocol Bridging and Interface Conversion, Motor and Motion Control, Programmable Instrumentation, Sensor Aggregation and Edge Logic.
Industrial Control and Automation
The EP4CE10F17C8LN fits compact industrial controllers because 10,320 logic elements can implement multiple control loops, state machines, interlocks, and communication adapters while 414 Kb of block RAM provides dedicated data buffering. The 179 I/O positions support digital sensors, actuators, counters, and field-bus logic without requiring a separate programmable-logic device. Its 0°C to 85°C commercial rating is appropriate for many indoor factory equipment installations. Place the 256-ball device where thermal copper and vias can support the calculated power dissipation, and validate timing for the selected C8 speed grade.
پیشنهادی
Programmable Data Acquisition
The EP4CE10F17C8LN can capture and process multiple parallel data streams using its 179 I/O positions and 47 logic blocks. Designers can implement counters, digital filters, trigger logic, format conversion, and first-stage buffering in the FPGA before transferring results to a processor. The 414 Kb of block RAM helps absorb bursts and organize sampled channels without immediately using external memory. The 1.2 V core and 1 V FPGA supplies should be generated according to the recommended topology, while high-speed inputs require careful signal-integrity analysis and board-level timing verification.
پیشنهادی
Protocol Bridging and Interface Conversion
The EP4CE10F17C8LN is suitable for bridging dissimilar digital interfaces by implementing receive and transmit state machines, data alignment logic, and buffering in programmable logic. Its 10,320 logic elements are sufficient for multiple modest-width channels, while 414 Kb of block RAM can support packet buffering and asynchronous clock-domain staging. The device’s 179 I/O provide substantial board connectivity, although designers should confirm voltage-tolerance and interface standards for every assigned pin. The 1 mm-pitch FBGA also requires escape-routing space and assembly-capable PCB design rules.
پیشنهادی
Motor and Motion Control
The EP4CE10F17C8LN can execute deterministic motion-control functions such as encoder decoding, pulse generation, direction sequencing, and multi-axis coordination. Parallel logic blocks improve responsiveness compared with a general-purpose microcontroller, while embedded RAM can hold calibration tables or position histories. The 179 I/O allow encoder, capture, compare, and fault signals to be connected directly to the FPGA. Commercial systems should verify motor-drive operating conditions against the 0°C to 85°C range, and designers should use the C8 timing margin conservatively for closed-loop control paths.
پیشنهادی
Programmable Instrumentation
The EP4CE10F17C8LN can consolidate measurement, triggering, calibration, and data-formatting functions in a laboratory or test instrument. Its 47 logic blocks can implement timing generators, digital comparators, histogram processing, and communication formatting, while 414 Kb of block RAM supports local sample storage. The 179 I/O simplify simultaneous connection to sensors, counters, display logic, and a communications controller. Because instrument requirements may demand precise clocking and low-noise supply behavior, follow the manufacturer power-network recommendations and use the C9 speed grade only when timing analysis justifies it.
پیشنهادی
Sensor Aggregation and Edge Logic
The EP4CE10F17C8LN can aggregate outputs from multiple sensors before they reach a host processor. Digital filtering, thresholding, timestamping, calibration, and fault detection can run concurrently in programmable logic, reducing host workload and creating deterministic response paths. The device offers 10,320 logic elements for moderate parallel pipelines and 414 Kb of block RAM for local buffering, while 179 I/O permit numerous sensor and communication connections. For deployed IoT equipment, confirm that ambient temperature remains within 0°C to 85°C and assess unused I/O behavior to prevent unnecessary switching activity.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EP4CE10F17C8LN — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EP4CE10F17C8N | EP4CE10F17C8L | EP4CE10F17C8 | EP4CE10F17C9LN |
|---|---|---|---|---|---|
| Brand | Altera Corporation | Altera Corporation | Altera Corporation | Altera Corporation | Altera Corporation |
| Package | 256-terminal F17 FBGA, 17 mm × 17 mm | 256-terminal F17 FBGA, 17 mm × 17 mm | 256-terminal F17 FBGA, 17 mm × 17 mm | 256-terminal F17 FBGA, 17 mm × 17 mm | 256-terminal F17 FBGA, 17 mm × 17 mm |
| FPGA Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Logic Elements | 10,320 elements | 10,320 elements | 10,320 elements | 10,320 elements | 10,320 elements |
| Logic Blocks | 47 blocks | 47 blocks | 47 blocks | 47 blocks | 47 blocks |
| Embedded Block RAM | 414 Kb | 414 Kb | 414 Kb | 414 Kb | 414 Kb |
| Process Technology | 60 nm | 60 nm | 60 nm | 60 nm | 60 nm |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | C8 | C8 | C8 | C8 | C9 |
تفاوتهای کلیدی
- Direct fit within the documented EP4CE10F17C8 ordering family (در مقابلEP4CE10F17C8N)
- Higher timing class available in the same package family (در مقابلEP4CE10F17C9LN)
- Balanced logic, memory, and I/O capacity for embedded control (در مقابلEP4CE10F17C8L)
یادداشتهای طراحی
Implement the 1.2 V core and nominal 1 V FPGA supply networks using the manufacturer-recommended regulator topology, sequencing, and decoupling arrangement. Place the required bulk and high-frequency capacitors adjacent to their designated power balls, with very short ground returns into the appropriate plane. Do not treat the 1 V and 1.2 V figures as interchangeable rails; each represents a distinct supply requirement within the device architecture.
Estimate worst-case dissipation from the actual clock rate, I/O switching activity, resource utilization, supply voltage, and ambient temperature rather than using a generic package power number. Compare that estimate with the allowed junction-temperature rise, then increase top-layer copper, thermal-via density, or board area as needed. The 256-ball F17 package offers many power and ground connections, but their connection quality still depends on via geometry and the PCB’s effective thermal path.
Design the 17 mm × 17 mm, 1 mm-pitch F17 land pattern for the assembly process, including pad-to-mask ratios, trace-width limits, solder-mask-defined versus non-defined pads, via-in-pad rules, and thermal-relief requirements. Reserve clean escape routing for configuration, JTAG, clocks, and high-speed interfaces. Avoid adding test features or keepouts that conflict with the manufacturer’s package drawing and PCB assembly drawing.
Do not substitute an EP4CE10F17C8-family part solely because the package name matches. Confirm the complete ordering code, speed grade, commercial or industrial temperature range, termination or environmental suffix, lead-free status, configuration method, and supply requirements. In particular, EP4CE10F17C9LN uses a different speed class and should be selected only after timing analysis shows that the C8 grade is inadequate.
اطلاعات انطباق
The product listing identifies the EP4CE10F17C8LN as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are unknown. AEC-Q100 is not applicable to this general-purpose commercial-temperature FPGA ordering code.