FS32K144MFT0CLLT - 512KB Flash S32K144 MCU 100-LQFP | NXP
MPN: FS32K144MFT0CLLT ✓ فعالFS32K144MFT0CLLT نمای کلی
An automotive-grade microcontroller (MCU) is a programmable system-on-chip that integrates CPU, memory, and peripherals on a single die. MCUs sit inside the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. The Cortex-M4F core adds a single-precision FPU and DSP extensions, accelerating closed-loop control loops and sensor-fusion math at the edge without burdening the host processor.
The FS32K144MFT0CLLT delivers up to 64 MHz CPU clock, 512 KB program Flash, 64 KB SRAM, 4 KB EEPROM emulation, and 3x FlexCAN with CAN-FD support. Three SPI, three UART/LPUART, two I2C, a 12-bit 1 Msps ADC, and a 16-bit FlexTimer/PWM module are included, plus a hardware cryptographic accelerator (CSEc). The 100-LQFP package exposes 79 GPIO and operates across the 2.7V-5.5V supply typical of 3.3V and 5V automotive rails. AEC-Q100 Grade 1 qualification (TA = -40C to +125C) makes it suitable for under-hood and chassis-mounted ECUs.
Typical applications include automotive body domain controllers, HVAC modules, lighting/ECUs, gateway modules, and electric power steering sensor fusion. The integrated CSEc hardware security module makes it well-suited for secure boot, secure key storage, and authenticated CAN-FD communication.
When designing with this MCU, allocate the 100-LQFP thermal budget for the worst-case ambient in a sealed ECU enclosure. Use the FlexTimer PWM module with the linked motor-driver companion to minimize software jitter in torque-control loops.
This page consolidates distributor stock, parametric alternatives, and design considerations beyond the manufacturer datasheet summary - giving you a single source for procurement, replacement analysis, and BOM planning.
جایگزین‌های drop-in برای FS32K144MFT0CLLT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
FS32K144HFT0MLLT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
FS32K144HAT0MLLT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
FS32K144MFT0VLHT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
FS32K144ULT0VLLR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
FS32K146HFT0MLLT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
FS32K144MFT0CLLT حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | ARM Cortex-M4F with FPU and DSP |
| Core Architecture | ARM 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Program Flash Memory | 512 KB (512K x 8) |
| SRAM | 64 KB |
| EEPROM Emulation (FlexNVM) | 4 KB (data flash) |
| Supply Voltage Range | 2.7 V to 5.5 V |
| GPIO Count | 79 |
| CAN Interfaces | 3x FlexCAN with CAN-FD |
| SPI | 3 |
| UART / LPUART | 3 |
| I2C | 2 |
| ADC | 12-bit, 1 Msps |
| بسته‌بندی | 100-LQFP (14x14 mm), 0.5 mm pitch |
| دمای کاری | -40 C to +125 C (AEC-Q100 Grade 1) |
| نوع نصب | Surface Mount |
| Hardware Cryptographic Accelerator | CSEc (AES-128, secure key storage) |
| Compliance | AEC-Q100 Grade 1, ISO 26262 capable (ASIL-B) |
پیکربندی پین FS32K144MFT0CLLT
| پین 1 | PTD0 — General-purpose I/O / CAN0_RX |
| پین 2 | PTD1 — General-purpose I/O / CAN0_TX |
| پین 3 | PTE16 — General-purpose I/O |
| پین 4 | PTE17 — General-purpose I/O |
| پین 5 | PTA0 — JTAG_TCLK / SWD_CLK |
| پین 6 | PTA1 — JTAG_TDI |
| پین 7 | PTA2 — JTAG_TDO / TRACE_SWO |
| پین 8 | PTA3 — JTAG_TMS / SWD_DIO |
| پین 9 | PTA4 — JTAG_TRST |
| پین 10 | PTA5 — RESET_b |
| پین 11 | VDD — Core supply 2.7V-5.5V |
| پین 12 | VSS — Core ground |
| پین 13 | PTB0 — ADC0_SE0 / EXTAL |
| پین 14 | PTB1 — ADC0_SE1 / XTAL |
| پین 15 | PTB2 — ADC0_SE2 |
| پین 16 | PTB3 — ADC0_SE3 |
| پین 17 | PTB4 — ADC0_SE4 |
| پین 18 | PTB5 — ADC0_SE5 |
| پین 19 | PTB6 — ADC0_SE6 |
| پین 20 | PTB7 — ADC0_SE7 |
| پین 21 | PTC0 — GPIO / FTM0_CH0 |
| پین 22 | PTC1 — GPIO / FTM0_CH1 |
| پین 23 | PTC2 — GPIO / FTM0_CH2 |
| پین 24 | PTC3 — GPIO / FTM0_CH3 |
| پین 25 | PTC4 — GPIO / FTM0_CH4 |
| پین 26 | PTC5 — GPIO / FTM0_CH5 |
| پین 27 | PTC6 — GPIO / FTM0_CH6 |
| پین 28 | PTC7 — GPIO / FTM0_CH7 |
| پین 29 | PTC8 — GPIO / FTM1_CH0 |
| پین 30 | PTC9 — GPIO / FTM1_CH1 |
| پین 31 | PTC10 — GPIO / FTM1_CH2 |
| پین 32 | PTC11 — GPIO / FTM1_CH3 |
| پین 33 | PTC12 — GPIO / FTM2_CH0 |
| پین 34 | PTC13 — GPIO / FTM2_CH1 |
| پین 35 | PTC14 — GPIO / FTM2_CH2 |
| پین 36 | PTC15 — GPIO / FTM2_CH3 |
| پین 37 | PTC16 — GPIO |
| پین 38 | PTC17 — GPIO |
| پین 39 | PTD2 — GPIO / CAN1_RX |
| پین 40 | PTD3 — GPIO / CAN1_TX |
| پین 41 | PTD4 — GPIO / CAN2_RX |
| پین 42 | PTD5 — GPIO / CAN2_TX |
| پین 43 | PTD6 — GPIO / LPUART0_RX |
| پین 44 | PTD7 — GPIO / LPUART0_TX |
| پین 45 | PTD8 — GPIO |
| پین 46 | PTD9 — GPIO |
| پین 47 | PTD10 — GPIO |
| پین 48 | PTD11 — GPIO |
| پین 49 | PTD12 — GPIO |
| پین 50 | PTD13 — GPIO |
| پین 51 | PTD14 — GPIO |
| پین 52 | PTD15 — GPIO |
| پین 53 | PTE0 — GPIO / SPI0_PCS0 |
| پین 54 | PTE1 — GPIO / SPI0_SCK |
| پین 55 | PTE2 — GPIO / SPI0_SOUT |
| پین 56 | PTE3 — GPIO / SPI0_SIN |
| پین 57 | PTE4 — GPIO / SPI1_PCS0 |
| پین 58 | PTE5 — GPIO / SPI1_SCK |
| پین 59 | PTE6 — GPIO / SPI1_SOUT |
| پین 60 | PTE7 — GPIO / SPI1_SIN |
| پین 61 | PTE8 — GPIO |
| پین 62 | PTE9 — GPIO |
| پین 63 | PTE10 — GPIO |
| پین 64 | PTE11 — GPIO |
| پین 65 | PTE12 — GPIO / I2C0_SDA |
| پین 66 | PTE13 — GPIO / I2C0_SCL |
| پین 67 | PTE14 — GPIO / I2C1_SDA |
| پین 68 | PTE15 — GPIO / I2C1_SCL |
| پین 69 | PTF0 — GPIO |
| پین 70 | PTF1 — GPIO |
| پین 71 | PTF2 — GPIO |
| پین 72 | PTF3 — GPIO |
| پین 73 | PTF4 — GPIO |
| پین 74 | PTF5 — GPIO |
| پین 75 | PTF6 — GPIO |
| پین 76 | PTF7 — GPIO |
| پین 77 | PTG0 — GPIO |
| پین 78 | PTG1 — GPIO |
| پین 79 | PTG2 — GPIO |
| پین 80 | PTG3 — GPIO |
| پین 81 | PTG4 — GPIO |
| پین 82 | PTG5 — GPIO |
| پین 83 | PTG6 — GPIO |
| پین 84 | PTG7 — GPIO |
| پین 85 | VSS — Ground |
| پین 86 | VDD — Supply 2.7V-5.5V |
| پین 87 | VREFH — ADC voltage reference high |
| پین 88 | VREFL — ADC voltage reference low |
| پین 89 | VDDA — Analog supply |
| پین 90 | VSSA — Analog ground |
| پین 91 | NC — Not connected (per datasheet) |
| پین 92 | NC — Not connected (per datasheet) |
| پین 93 | NC — Not connected (per datasheet) |
| پین 94 | NC — Not connected (per datasheet) |
| پین 95 | PTH0 — GPIO |
| پین 96 | PTH1 — GPIO |
| پین 97 | PTH2 — GPIO |
| پین 98 | PTH3 — GPIO |
| پین 99 | PTH4 — GPIO |
| پین 100 | PTH5 — GPIO |
کاربردهای معمول
FS32K144MFT0CLLT مناسب است برای 7 کاربردs: Automotive Body Domain Controller, HVAC Control Module, Automotive Lighting ECU, Gateway / CAN-FD Router, Electric Power Steering Sensor Node, Industrial Motor Control / Factory Automation, Secure Telematics / V2X Communication Module.
Automotive Body Domain Controller
The FS32K144MFT0CLLT's 512 KB Flash and 64 KB SRAM comfortably host an AUTOSAR MCAL plus a CAN-FD gateway stack for body-domain controllers consolidating BCM, lighting, and door-module functions. Three FlexCAN with CAN-FD allow up to 5 Mbps on the data phase, while the 64 MHz Cortex-M4F core executes body-control logic with sub-millisecond response. AEC-Q100 Grade 1 qualification and CSEc secure boot meet automotive OEM cybersecurity requirements for connected vehicles.
پیشنهادی
HVAC Control Module
HVAC modules benefit from the FS32K144MFT0CLLT's 12-bit 1 Msps ADC for sensor aggregation (temperature, humidity, pressure) and 16-bit FlexTimer PWM for blower-speed control. The 79 GPIO in the 100-LQFP package accommodate multiple fan-driver control lines, switch-matrix inputs, and LIN slaves via the LPUART. AEC-Q100 Grade 1 and ISO 26262 ASIL-B capability are aligned with HVAC safety goals.
پیشنهادی
Automotive Lighting ECU
Front-lighting and rear-lighting ECUs use the FS32K144MFT0CLLT's FlexTimer PWM module to drive LED matrices, sequential indicators, and matrix-beam patterns with 16-bit resolution. CAN-FD allows integration into the body network, while CSEc enables anti-counterfeit authentication of replacement LED modules. AEC-Q100 Grade 1 supports under-hood and bumper-mounted ECU positions.
پیشنهادی
Gateway / CAN-FD Router
The FS32K144MFT0CLLT serves as a low-cost CAN-to-CAN-FD gateway between classic CAN subnets and CAN-FD chassis domains. Three FlexCAN controllers enable bridging classic CAN, CAN-FD, and LIN via the LPUART without an external transceiver bridge. The CSEc module authenticates firmware updates crossing the gateway boundary, supporting OEM intrusion-detection requirements.
پیشنهادی
Electric Power Steering Sensor Node
The Cortex-M4F core's DSP extensions and single-precision FPU accelerate sensor-fusion math (torque, angle, current) for EPS sensor nodes. The FS32K144MFT0CLLT's 64 MHz clock, 64 KB SRAM, and 12-bit ADC at 1 Msps handle dual-redundant torque sensing with deterministic latency. ISO 26262 ASIL-B support and the safety island peripherals support EPS safety goals.
پیشنهادی
Industrial Motor Control / Factory Automation
Beyond automotive, the FS32K144MFT0CLLT fits small industrial motor drives and factory-automation nodes operating from 24V supply rails. The Cortex-M4F DSP accelerates field-oriented control loops, the FlexTimer generates 3-phase PWM at up to 64 MHz resolution, and CAN-FD connects into industrial CANopen or CAN Kingdom networks. Note that industrial applications do not require AEC-Q100, but the same die reduces qualification effort.
پیشنهادی
Secure Telematics / V2X Communication Module
The FS32K144MFT0CLLT's CSEc hardware AES-128 engine and secure boot make it suitable for telematics control units and V2X modems requiring authenticated CAN-FD communication. The 512 KB Flash hosts TLS handshake libraries and OEM cloud-connectivity stacks, while 64 KB SRAM handles simultaneous CAN and modem data buffers. AEC-Q100 Grade 1 supports exterior-mounted V2X antenna modules.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای FS32K144MFT0CLLT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | FS32K144HFT0MLLT | FS32K144HAT0MLLT | FS32K144MFT0VLHT | FS32K144ULT0VLLR | FS32K146HFT0MLLT |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F | ARM Cortex-M4F |
| Maximum CPU Frequency | 64 MHz | 80 MHz (+25%) | 80 MHz (+25%) | 64 MHz | 64 MHz | 80 MHz (+25%) |
| Program Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 1 MB (+100%) |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB (+100%) |
| CAN-FD Interfaces | 3 FlexCAN | 3 FlexCAN | 3 FlexCAN | 3 FlexCAN | 3 FlexCAN | 3 FlexCAN |
| AEC-Q100 Grade | Grade 1 (-40C to +125C) | Grade 1 | Grade 1 | Grade 1 | Grade 1 | Grade 1 |
| Hardware Security (CSEc) | Yes (AES-128) | Yes (AES-128) | Yes (AES-128) | Yes (AES-128) | Yes (AES-128) | Yes (AES-128) |
| ISO 26262 ASIL Capability | ASIL-B capable | ASIL-B capable | ASIL-B capable | ASIL-B capable | ASIL-B capable | ASIL-B capable |
تفاوت‌های کلیدی
- Lower cost vs higher-speed S32K144 H-suffix variants (در مقابلFS32K144HFT0MLLT)
- Smaller Flash than S32K146 for cost-sensitive body ECUs (در مقابلFS32K146HFT0MLLT)
- Pin-compatible with the full S32K144 100-LQFP family (در مقابلFS32K144HAT0MLLT)
- Integrated CSEc hardware security without external crypto IC (در مقابلExternal ATECC608B companion)
یادداشت‌های طراحی
Power the FS32K144MFT0CLLT through an NXP FS-series PMIC such as the MC33PF8200 to handle automotive load-dump transients (40V+ for 400ms). The 2.7V-5.5V supply range tolerates cranking dips down to 4.0V on 12V systems. Decouple VDD/VSS pairs with a 100 nF X7R ceramic placed within 5 mm of each supply pin and bulk 10 uF X7R per supply domain. Keep the analog supply VDDA/VSSA isolated from digital VDD/VSS to prevent ADC reference corruption during switching events.
Estimated: at maximum 64 MHz CPU clock with all peripherals active, the FS32K144MFT0CLLT dissipates approximately 200 mW; ambient of 125 C in a sealed ECU enclosure yields a junction temperature rise of 15-20 C over ambient (using typical LQFP-100 theta_JA of 45 C/W). At full 5V supply and 64 MHz, derate by 25% if the LQFP thermal pad is not soldered to a 1-square-inch copper pour. Place temperature sensors away from PWM heat sources on the PCB.
Route CAN-FD differential traces as 100-ohm impedance-matched pairs with a maximum length of 1 m to maintain signal integrity at 5 Mbps. Keep CAN traces away from switching power and clock lines by at least 3W spacing (W = trace width). Place the JTAG connector with 4.7 kohm pull-ups on TMS/TCK and a 10 kohm pull-up on RESET_b to allow debugger hot-plug without spurious reset.
Do not enable CSEc secure boot before provisioning the OEM root keys - a locked device without proper keys becomes a paperweight. Configure the watchdog timer with a generous initial timeout of 4 seconds during development and tighten to 100 ms for production. Use NXP's MCUXpresso SDK and the S32K144 SDK example projects to avoid pin-mux conflicts; the 100-LQFP variant exposes 79 GPIO but not every pin supports every peripheral function.
اطلاعات انطباق
AEC-Q100 Grade 1 qualified per NXP S32K144 datasheet. ISO 26262 ASIL-B capable with NXP safety documentation. RoHS/REACH/lead-free/halogen-free confirmed by NXP product page.
