ICS1523MT - 250MHz Video Clock Synthesizer | Renesas
MPN: ICS1523MT ✓ فعالICS1523MT نمای کلی
A video clock synthesizer is a timing IC that generates, divides, delays, or phases a reference clock so downstream video-processing circuits operate from a controlled timing source. In the broader semiconductor hierarchy, the ICS1523MT belongs to the clock and timing IC category and supports power-management, display, broadcast, and video-conversion systems where predictable phase relationships and programmable timing are required.
The main feature of the ICS1523MT is its I2C-programmable delay. This allows a system controller to adjust timing behavior over a serial interface rather than relying on fixed external delay components. The part is specifically suited to phase-controlled clock synthesis, where the relationship between a generated clock and an external reference must be managed precisely. Its video-clock orientation makes it useful in professional video, broadcast, monitoring, and genlocking equipment.
The ICS1523MT is identified as a 24-SOIC device with a 0.295 inch, or 7.50 mm, width. The suffix MT distinguishes this ordering code from other package or temperature-related variants of the ICS1523 family. Because clock timing performance depends on reference-clock quality, board layout, output loading, and supply stability, designers should preserve short clock paths and provide the decoupling recommended by the manufacturer datasheet.
Typical applications include high-resolution video timing, line-locked systems, genlocked broadcast equipment, video capture and conversion systems, and multi-standard video infrastructure. The I2C control interface is especially useful in systems where timing calibration must be adjusted dynamically during setup or when different video formats require different phase relationships.
Designers should verify the complete electrical limits, register map, clock-input requirements, output characteristics, and recommended application circuit against the Renesas datasheet before layout release. The principal trade-off is that programmable delay adds control complexity, but it can reduce discrete timing hardware and improve system calibration flexibility.
This page combines the verified ICS1523MT product identity, package information, clock-synthesizer classification, datasheet links, application guidance, and drop-in alternatives for engineers evaluating a PCB-compatible replacement.
جایگزینهای drop-in برای ICS1523MT — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ICS1523MT (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Phase Control, Product Type.
ICS1523M
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ICS1523MLF
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ICS1523MLFT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ICS1523MT مشخصات
| Product Type | Video Clock Synthesizer |
| Manufacturer | Renesas Electronics |
| Nominal Maximum Frequency | 250 MHz |
| Control Interface | I2C |
| Programmable Delay | Yes |
| Clock Generation Type | Frequency synthesizer |
| Application | Video clock synthesis |
| بستهبندی | 24-SOIC (0.295 inch, 7.50 mm width) |
| Package Pin Count | 24 pins |
| نوع نصب | Surface mount |
| Phase Control | Supported |
| Line Locking | Supported |
| Genlocking | Supported |
راهنمای پیکربندی پین ICS1523MT 24 pins
پیکربندی پین برای ICS1523MT (پکیج 24 pins). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای ICS1523MT.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ICS1523MT مناسب است برای 6 کاربردs: High-Resolution Video Timing, Line-Locked Video Systems, Genlocked Broadcast Equipment, Video Capture and Conversion, Professional Video Infrastructure, Display and Timing Control.
High-Resolution Video Timing
The ICS1523MT fits high-resolution video timing systems that need a controlled clock source with adjustable phase or delay. Its 250 MHz nominal clock capability and I2C-programmable delay allow a controller to tune timing during system setup instead of relying on fixed passive delay networks. The device can be placed in the clock-generation path between the system reference and video-processing logic. Because timing accuracy depends on reference quality and board geometry, keep the clock route short, use a stable reference source, and verify output phase and load behavior on the target PCB.
پیشنهادی
Line-Locked Video Systems
Line-locked systems require the internal video timing to remain phase-aligned with an incoming reference. The ICS1523MT is intended for line-locked high-resolution video use and provides phase-controlled clock synthesis with I2C-programmable delay. This allows calibration or format-dependent adjustments to be made from system firmware. In implementation, characterize the reference input and required clock outputs on the target board, keep the timing path isolated from high-current switching nodes, and validate locking behavior across every supported video format before production use.
پیشنهادی
Genlocked Broadcast Equipment
The ICS1523MT supports genlocked broadcast and production equipment where multiple video paths must maintain predictable phase relationships. Its 250 MHz-class clock generation and programmable delay make it suitable for centralized timing generation, synchronization, and format conversion. A system designer should use the manufacturer reference configuration to establish input, output, and bypass behavior, then measure phase alignment and stability over the required temperature range. I2C programmability supports controlled commissioning without extensive rework.
پیشنهادی
Video Capture and Conversion
In video capture and conversion equipment, the ICS1523MT can provide the timing reference used to coordinate sampling and processing domains. I2C-programmable delay allows calibration for different capture rates or operating modes, while the 250 MHz nominal specification supports demanding clock architectures. Place the synthesizer where reference and generated clock routing can remain short and deterministic. Validate sampling-edge margin and inter-clock phase behavior in the complete signal chain, not only at the synthesizer output.
پیشنهادی
Professional Video Infrastructure
The ICS1523MT can support professional video infrastructure requiring adjustable clock timing, including monitoring, switching, and multi-format equipment. Programmable delay through I2C simplifies system-level timing calibration and permits configuration changes during production or installation. Its 24-SOIC package supports conventional surface-mount assembly and reuse of an existing video timing board. Thermal and power behavior are modest relative to many processors, but supply decoupling and clock-output loading still require layout attention to preserve signal integrity.
پیشنهادی
Display and Timing Control
Display systems that coordinate multiple pixel or processing clocks can use the ICS1523MT to generate phase-controlled timing with adjustable delay. The I2C interface makes it practical to compensate for board-level timing variation or select timing configurations for different display modes. The device should operate from the reference specified by the Renesas datasheet, with clean supply decoupling and short clock paths. System validation should include frame timing, clock-to-clock phase, output loading, and operation across every supported display refresh rate.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ICS1523MT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ICS1523M | ICS1523MLF | ICS1523MLFT |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 24-SOIC (0.295 inch, 7.50 mm width) | 24-SOIC (0.295 inch, 7.50 mm width) | 24-SOIC | 24-SOIC |
| Product Type | Video Clock Synthesizer | Clock Synthesizer - Video IC | Video Clock Synthesizer | Video Clock Synthesizer |
تفاوتهای کلیدی
- Directly identified drop-in package compatibility (در مقابلICS1523MLF)
- Matching 250 MHz-class video timing identity (در مقابلICS1523M)
- I2C timing adjustment for calibrated video systems (در مقابلICS1523MLFT)
یادداشتهای طراحی
Use the Renesas datasheet application circuit as the foundation for power and signal layout. Place the required input and bypass capacitors close to their designated pins, keep the reference-clock route short, and route clock outputs directly to their loads. Avoid placing the reference or clock traces beneath switching-converter nodes. Because the ICS1523MT is intended for phase-controlled video timing, small routing differences can affect system-level phase margin even when the IC operates within its electrical limits.
Validate clock-edge quality at the downstream load with the output configuration and termination actually used in the design. Maintain a continuous reference-clock path, use the recommended grounding topology, and avoid stubs or unnecessary test pads on sensitive timing nets. For a new PCB, compare measured frequency, phase, and jitter at temperature against the video-system requirement. I2C-programmable delay simplifies calibration, but it does not correct excessive trace loss, crosstalk, or unstable reference-clock behavior.
Do not substitute an ordering code solely because it uses the same 24-SOIC outline. Confirm the exact suffix, temperature range, qualification grade, lifecycle status, pin names, and electrical limits in the manufacturer documentation. For ICS1523MLF and ICS1523MLFT, verify that the change is acceptable for the production program rather than treating package compatibility as complete qualification. Also request the appropriate shipping format because the MT and T suffixes may have different ordering or packing implications.
Design the supply network for low-noise clock operation by following the manufacturer's bypass and decoupling recommendations. Keep switching-regulator loops and high-current outputs spatially separate from the reference and clock paths. Confirm the actual supply voltage and operating current against the datasheet because those values are not established by the available listing excerpt. Use a clean, stable reference source and avoid adding unnecessary load steps near the timing circuitry.
اطلاعات انطباق
The verified product records identify the device and package but do not state specific compliance declarations.