LC4064V-5T100I - 64-Macro CPLD | Lattice Semiconductor
MPN: LC4064V-5T100I ✗ پایان تولیدLC4064V-5T100I نمای کلی
A CPLD, or complex programmable logic device, is a user-programmable digital semiconductor that combines programmable logic blocks, programmable interconnect, and input/output resources into a compact logic solution. In the product hierarchy, the LC4064V-5T100I is a CPLD, a form of programmable logic, within the broader FPGA and CPLD category. Its 64 macro cells provide more integration than basic PAL or GAL devices while retaining nonvolatile configuration and predictable timing.
The principal feature is in-system programmability, allowing the device to be configured through its programming interface without removal from the circuit. The family supports 3.3 V, 2.5 V, and 1.8 V operation, allowing the same logic architecture to serve multiple supply environments. Its 100-pin TQFP package provides a substantial number of user I/O resources for interfacing external memories, control buses, data converters, and industrial peripherals.
The ispMACH 4000V architecture blends the characteristics of Lattice ispLSI 2000 and ispMACH 4A devices. In a typical design, the CPLD performs deterministic control, protocol conversion, address decoding, interface bridging, or launch-data and capture-data functions. Its macro-cell organization is appropriate for compact glue logic around processors, FPGAs, memories, and communication peripherals rather than large DSP or high-speed parallel-processing workloads.
Typical uses include industrial control and factory automation, network-interface logic, instrumentation, embedded system support, and general-purpose product control. The 64 macro cells can consolidate multiple Boolean functions and state-machine sections into one device. Designers should match the design to the device architecture, available I/O, supported supply voltage, timing constraints, and system programming requirements before assigning pins or compiling the final logic.
The principal design considerations are power-supply integrity, correct JTAG or serial programming connections, disciplined I/O assignment, and verification of timing constraints. The I suffix supports industrial-temperature operation, but the complete device should still be evaluated against its absolute maximum and recommended operating conditions in the manufacturer datasheet. Board design should also account for signal-integrity requirements associated with high-speed clock and control nets.
This page organizes the device family information, lifecycle status, drop-in replacement candidates, package details, sourcing options, and practical design guidance. It is intended to help engineers identify whether the LC4064V-5T100I matches an existing ispMACH 4000V design before requesting a formal quotation or reviewing the complete manufacturer documentation.
جایگزینهای drop-in برای LC4064V-5T100I — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LC4064V-5T100I (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Temperature Grade, Product Family.
LC4064V-5TN100I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LC4064V-75TN100C
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LC4064V-75TN100E
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LC4064ZC-5T100I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LC4064C-5T100I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LC4064V-5T100I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000V |
| Macro Cells | 64 macro cells |
| Logic Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Programmability | In-system programmable |
| Supported Supply Voltages | 1.8 V, 2.5 V, or 3.3 V |
| Speed Designation | -5 speed grade |
| Temperature Grade | Industrial grade |
| بستهبندی | 100-pin TQFP |
| نوع نصب | Surface mount |
راهنمای پیکربندی پین LC4064V-5T100I 100-pin tqfp
پیکربندی پین برای LC4064V-5T100I (پکیج 100-pin tqfp). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای LC4064V-5T100I.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LC4064V-5T100I مناسب است برای 6 کاربردs: Industrial Control Logic, Factory Automation Interfaces, Network Interface Support Logic, Test and Measurement Instruments, Embedded Processor Support, Data Acquisition and Signal Conditioning.
Industrial Control Logic
The LC4064V-5T100I fits deterministic industrial control blocks that coordinate sensors, actuators, interlocks, and machine sequencing. Its 64 macro cells can consolidate Boolean equations, counters, state machines, address decoding, and interlock logic into a single 100-pin TQFP device. In-system programmability allows configuration and board test to be handled through the system programming interface without physically removing the package. The industrial-grade suffix suits equipment requiring an extended-temperature option, although the exact limits must be confirmed in the manufacturer documentation. Engineers should use deterministic timing constraints, isolate external signals appropriately, and keep programming access available for production diagnostics.
پیشنهادی
Factory Automation Interfaces
The LC4064V-5T100I can implement protocol conversion and interface logic between factory equipment and higher-level controllers. Its 64 macro cells are useful for converting parallel signals into serial formats, generating timing-qualified control outputs, decoding device addresses, and supervising communication handshakes. The 100-pin TQFP provides enough physical I/O for mixed bus, control, and status connections, while the -5 grade targets faster system timing than the -75 alternatives. Designers should assign pins from the manufacturer table, apply appropriate input thresholds and output loading, and reserve the programming interface for configuration or test access.
پیشنهادی
Network Interface Support Logic
The LC4064V-5T100I is suitable for deterministic network-support functions such as data routing, packet framing, command decoding, and status multiplexing around a host processor or larger programmable-logic device. The ispMACH 4000V family's in-system programmability makes it practical to adapt the same board for protocol revisions or manufacturing test. Its 100-pin package supports a combination of user I/O and fixed configuration functions, but the complete pin list must be checked before assigning high-speed or multiplexed signals. Clock-domain crossing, output timing, and configuration-pin handling require conservative timing constraints and careful PCB routing.
پیشنهادی
Test and Measurement Instruments
In test and measurement equipment, the LC4064V-5T100I can consolidate trigger routing, mode sequencing, display or front-panel control, instrument-bus decoding, and acquisition-system support logic. The 64-macro-cell device provides a practical balance between integration and predictable timing, while in-system programming supports repeatable configuration during production. Its industrial-grade designation can be useful in laboratory and industrial environments, but designers must confirm operating-temperature limits and supply tolerances. Critical timing paths should be constrained in the design tool, and unused I/O pins should follow the manufacturer's termination and power-up guidance.
پیشنهادی
Embedded Processor Support
The LC4064V-5T100I can serve as a companion CPLD around a processor by implementing address decoding, chip-select generation, interrupt arbitration, bus-width adaptation, and peripheral glue logic. Its 64 macro cells allow multiple control functions to be consolidated without occupying the main processor's programmable resources. The in-system programming capability is useful when a production board must be configured or tested through the same programming chain used during development. Pin assignment must account for dedicated programming and power pins, and the replacement of an active processor with a CPLD should be checked for boot-time, level-shifting, and bus-timing constraints.
پیشنهادی
Data Acquisition and Signal Conditioning
The LC4064V-5T100I can implement deterministic acquisition-control logic, sample sequencing, trigger conditioning, and interface multiplexing in embedded measurement systems. The 100-pin TQFP provides a mix of user I/O and fixed functions for connecting converters, memories, status indicators, and host interfaces. The -5 speed grade is useful when control paths must meet tighter timing than the -75 devices, but analog signal conditioning remains outside the CPLD's function and requires separate input-protection and filtering stages. Validate acquisition timing against the converter interface, constrain all synchronous paths, and observe power-up states for safety-sensitive equipment.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LC4064V-5T100I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LC4064V-5TN100I | LC4064V-75TN100C | LC4064V-75TN100E | LC4064ZC-5T100I | LC4064C-5T100I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Product Family | ispMACH 4000V | LC4064V family | LC4064V family | LC4064V family | LC4064ZC family | LC4064C family |
| Speed Designation | -5 | -5 | -75 | -75 | -5 | -5 |
| Temperature Designation | I suffix, industrial option | I suffix, industrial option | C suffix | E suffix | I suffix, industrial option | I suffix, industrial option |
تفاوتهای کلیدی
- Faster speed designation within the 100-pin LC4064 family (در مقابلLC4064V-75TN100C)
- Closest same-family ordering match (در مقابلLC4064V-5TN100I)
- Established 64-macro-cell ispMACH 4000V positioning (در مقابلLC4064ZC-5T100I)
یادداشتهای طراحی
Do not treat every 100-pin LC4064-family device as an automatic substitute. Confirm that fixed programming pins, power pins, ground pins, I/O standards, user I/O availability, and package dimensions match the original board. The -75 alternatives use a slower timing designation than the -5 target, so even a mechanically compatible replacement can fail an existing setup-time or clock-frequency requirement.
Route the configuration interface and its associated signals as a dedicated programming path, using the manufacturer's reference circuit and termination guidance. Keep programming-access components away from long unprotected traces that could introduce noise during configuration. Verify connector orientation and voltage levels on the assembled board before attempting in-system programming, because incorrect interface voltage can damage the CPLD.
Design separate, low-impedance supply and ground connections and follow the manufacturer pinout for every power and ground connection. Check whether the board requires one supply configuration or supports the family's 1.8 V, 2.5 V, and 3.3 V operating options; those values are supply choices, not simultaneously required rails. Decouple each supply according to the datasheet guidance and include margin for inrush during configuration.
Constrain clock and synchronous I/O paths in the design tool, and treat unused inputs according to the manufacturer's recommendation. The -5 grade provides a timing advantage over the -75 alternatives, but timing closure still depends on board-level clock skew, load, and I/O standards. Validate the final design with post-route timing analysis and suitable test patterns rather than relying only on estimated performance.
Before committing to an obsolete device or its replacement, archive the programmed bitstream, pin assignment, timing constraints, and programming procedure. A mechanically compatible replacement must also accept the existing configuration method and preserve the original design's power-up behavior. A small qualification board can expose supply, configuration, and interface differences before the replacement is used in volume production.
اطلاعات انطباق
The industrial suffix identifies the temperature option but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. This is a programmable digital IC rather than an automotive-qualified device based on the available documentation.