Analog Devices

LT1124IS8 - Dual Precision Op Amp | Analog Devices

MPN: LT1124IS8 ✓ فعال
200 µV Vdss 8-pin SOIC, PDSO8 Package
حداقل سفارش: 1 |

LT1124IS8 نمای کلی

Analog Devices LT1124IS8 is a dual, low-noise, high-speed precision operational amplifier packaged in an 8-pin SOIC. The device provides two amplifier channels, a maximum input offset voltage of 200 µV, and support for supply voltages up to ±22 V. According to the manufacturer product page, the LT1124 offers higher gain, slew rate, and bandwidth than the OP-27 and competing OP-270 and OP-470 devices. It also features lower input bias current and input offset current than the OP-27, while consuming approximately one-half the power of two OP-27 amplifiers.

An operational amplifier, or op amp, is a high-gain differential amplifier used within the broader hierarchy of analog and signal-chain ICs. The LT1124 belongs to the precision-amplifier category, where low offset, low noise, high open-loop gain, and controlled gain bandwidth are important. Unlike a general-purpose amplifier optimized mainly for economical performance, this device targets instrumentation and measurement applications requiring accurate amplification of small signals.

The LT1124 family provides individually tested slew rate, gain-bandwidth product, and 1 kHz noise performance. This production testing helps maintain consistent behavior across amplifier channels and improves consistency between commercial, industrial, and other grade options. Its dual-channel configuration reduces the number of ICs needed when a circuit requires two closely related analog signal paths.

The LT1124 architecture is intended to provide a practical balance of precision, speed, noise performance, and power consumption. Two independent amplifiers can support instrumentation amplifiers, active filters, sensor conditioning, and low-level signal processing without requiring separate single-channel packages. The manufacturer specifically notes that the LT1124 consumes half the power of two OP-27 amplifiers while offering improved performance in key areas.

Typical uses include precision instrumentation, low-level sensor signals, audio and measurement circuits, active filtering, and analog signal conditioning. Its precision characteristics are particularly relevant when small differential signals must be amplified without adding significant offset error or noise. A dual amplifier can also implement differential or balanced analog stages while preserving consistent performance between channels.

When laying out an LT1124IS8 circuit, preserve the manufacturer's recommended bypass-capacitor arrangement and route sensitive input and feedback connections away from noisy switching nodes. Check output-current limits, load capacitance, and stability requirements for the selected gain configuration. The SOIC-8 footprint simplifies insertion into conventional surface-mount analog boards but requires adequate spacing for thermal dissipation at elevated supply voltage and output current.

This product page combines manufacturer specifications, distributor availability information, package guidance, drop-in replacement analysis, and practical design considerations. It is structured to help engineers compare the LT1124IS8 against related precision amplifiers while focusing on genuine 8-pin SOIC drop-in options rather than merely similar functions.

جایگزین‌های drop-in برای LT1124IS8 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

LT1124IS8#PBF

✅ جایگزین مستقیم
📦 8-pin SOIC
Same electrical configuration and 8-pin SOIC footprint; ordering code changes by 0 key-performance steps

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1124IS8-1#PBF

✅ جایگزین مستقیم
📦 8-pin SOIC
Same dual LT1124 architecture and 8-pin SOIC footprint; -1 performance designation changes offset grade by 1 family step

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1124AIS8

✅ جایگزین مستقیم
📦 8-pin SOIC
Same dual LT1124 architecture and 8-pin SOIC footprint; grade designation differs by 1 family step

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1124AMPS8

✅ جایگزین مستقیم
📦 8-pin SOIC
Same dual LT1124 architecture and 8-pin SOIC footprint; special grade designation differs by 2 family steps

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1124CS8

✅ جایگزین مستقیم
📦 8-pin SOIC
Same dual LT1124 architecture and 8-pin SOIC footprint; commercial grade differs by 1 family step

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1124CN8

✅ جایگزین مستقیم
📦 8-pin SOIC
Same dual LT1124 architecture and 8-pin SOIC footprint; commercial grade differs by 1 family step

📋 جایگزین مرجع (خارج از کاتالوگ)

LT1124IS8 حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Dual low-noise, high-speed precision operational amplifier
Number of Channels 2 channels
Maximum Input Offset Voltage 200 µV
ولتاژ تغذیه Up to ±22 V
Power Consumption Approximately one-half the power of two OP-27 amplifiers
بسته‌بندی 8-pin SOIC, PDSO8
نوع نصب Surface Mount

راهنمای پیکربندی پین LT1124IS8 8-pin soic, pdso8

پیکربندی پین برای LT1124IS8 (پکیج 8-pin soic, pdso8). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-pin soic, pdso8 برای LT1124IS8

داده پین‌آوت تفصیلی موجود نیست برای LT1124IS8.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

LT1124IS8 مناسب است برای 6 کاربردs: Precision Instrumentation Amplifiers, Low-Level Sensor Signal Conditioning, Active Audio Filters, Data Acquisition Front Ends, Precision Voltage Buffering, Test and Measurement Signal Paths.

🏭

Precision Instrumentation Amplifiers

The LT1124IS8 fits instrumentation front ends that amplify small differential sensor signals while requiring two closely related amplifier channels. Its maximum input offset voltage of 200 µV limits the DC error contribution in precision measurement systems, while the low-noise architecture supports weak sensor outputs. The dual SOIC package can implement input-stage gain, difference amplification, or active filtering. According to Analog Devices, slew rate, gain bandwidth, and 1 kHz noise are tested for each amplifier, which is valuable when channel-to-channel consistency affects measurement accuracy. Review the official electrical table for the exact gain-bandwidth product and noise value required by the signal chain.

🧩

Low-Level Sensor Signal Conditioning

The LT1124IS8 is suitable for conditioning low-amplitude outputs from pressure, temperature, strain, and laboratory sensors. The 200 µV maximum input offset voltage limits one important source of signal-chain error, and the device’s low-noise, high-speed precision design preserves signals better than a general-purpose amplifier. Its two channels can provide gain and filtering without splitting the signal path across two packages. The ±22 V maximum supply indication allows compatibility with conventional laboratory and industrial rails, subject to the manufacturer’s complete operating limits. Check input common-mode range, output swing, load capability, and stability for the chosen configuration before production release.

🎧

Active Audio Filters

The LT1124IS8 can implement active filtering stages in precision audio and communication equipment where low noise, adequate slew rate, and controlled gain bandwidth are important. Two amplifiers in one 8-pin SOIC make it possible to construct dual-path or linked filter sections while reducing package count. Analog Devices reports that slew rate and gain-bandwidth product are tested for every individual amplifier, supporting predictable behavior in bandwidth-sensitive stages. The LT1124 also consumes approximately one-half the power of two OP-27 amplifiers. Confirm maximum output swing, load impedance, noise density, and the exact stability requirements for the intended gain and filter topology.

🖥️

Data Acquisition Front Ends

The dual LT1124IS8 channels are useful ahead of analog-to-digital converters in data-acquisition systems that require gain and active filtering close to the sensor. Maximum input offset voltage of 200 µV helps reduce ADC-code error, while low-noise operation improves the usable input range for small analog signals. Placing two amplifiers in one 8-pin SOIC can simplify routing and preserve matching between complementary or sequential channels. Use the manufacturer datasheet to establish gain-bandwidth, input bias current, input common-mode range, and output-drive limits. Decoupling and sensitive-node layout remain essential because a precise amplifier cannot recover signal corrupted by noisy ground or supply paths.

⚡

Precision Voltage Buffering

The LT1124IS8 can buffer references or low-current precision nodes where offset error and channel consistency are more important than operating cost. Two independent channels allow one amplifier to drive an ADC reference while the other conditions a feedback or monitor signal, reducing component count and board area. Its low-noise, high-speed precision characteristics are preferable to a general-purpose op amp when the buffered signal must remain faithful at the system’s noise floor. The 200 µV maximum offset specification provides a concrete basis for initial error analysis. Confirm output current, capacitive-load stability, input common-mode range, and output-voltage swing for the actual reference source and load.

🔧

Test and Measurement Signal Paths

The LT1124IS8 is appropriate for precision test and measurement equipment requiring two low-noise, relatively fast amplifier channels. It can form gain stages around sensors, excitation loops, or balanced inputs while retaining more bandwidth than the OP-27 according to the manufacturer. Supply operation up to ±22 V supports conventional bipolar analog rails in laboratory equipment. Analog Devices’ per-amplifier testing of slew rate, gain bandwidth, and 1 kHz noise is particularly relevant when production measurements require repeatable behavior. Use short, shielded signal routes and verify grounding, input protection, output loading, and calibration stability. Exact noise and bandwidth limits must be taken from the manufacturer datasheet.

خلاصه محصولات پیشنهادی

OP27 Precision operational-amplifier reference استفاده‌شده در: Precision Instrumentation Amplifiers, Low-Level Sensor Signal Conditioning, Precision Voltage Buffering, Test and Measurement Signal Paths OP270 Dual precision-amplifier reference استفاده‌شده در: Precision Instrumentation Amplifiers, Low-Level Sensor Signal Conditioning, Active Audio Filters, Precision Voltage Buffering OP470 Quad precision-amplifier reference استفاده‌شده در: Precision Instrumentation Amplifiers, Active Audio Filters, Test and Measurement Signal Paths LT1125 Quad member of the same precision-amplifier family استفاده‌شده در: Active Audio Filters ADS8519IDB Texas Instruments استفاده‌شده در: Data Acquisition Front Ends ADS1262IPW Texas Instruments استفاده‌شده در: Data Acquisition Front Ends ADS1131IDR Texas Instruments استفاده‌شده در: Data Acquisition Front Ends
What is the LT1124IS8?
The LT1124IS8 is a dual, low-noise, high-speed precision operational amplifier from Analog Devices in an 8-pin SOIC package. It provides two amplifier channels, up to 200 µV maximum input offset voltage, and supply operation up to ±22 V. Analog Devices describes it as offering higher gain, slew rate, and bandwidth than the OP-27 and competing OP-270 and OP-470 amplifiers.
Where can I download the LT1124IS8 datasheet PDF?
The official LT1124/LT1125 datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/11245ff.pdf. The document covers the dual LT1124 and quad LT1125 precision operational amplifiers. Use the manufacturer datasheet for the definitive pin configuration, electrical limits, test conditions, ordering information, and application guidance for the LT1124IS8.
Where can I find the LT1124IS8 pinout?
Use the pin-configuration table and package drawing in the official Analog Devices LT1124/LT1125 datasheet to identify every LT1124IS8 connection. The device is an 8-pin SOIC with two operational amplifiers, but the individual terminal names and exposed functions should be assigned directly from the manufacturer diagram. The product page also links to the complete family datasheet.
What are the key specifications of LT1124IS8 that engineers should know?
The LT1124IS8 combines two precision amplifier channels in an 8-pin SOIC, supports supply voltages up to ±22 V, and has a maximum input offset voltage of 200 µV. Analog Devices states that gain, slew rate, and gain-bandwidth performance exceed those of the OP-27. The LT1124 also uses approximately half the power of two OP-27 amplifiers.
How much noise does the LT1124IS8 amplifier have?
The manufacturer identifies the LT1124 as a low-noise precision amplifier and states that 1 kHz noise, slew rate, and gain-bandwidth product are tested for every individual amplifier. The numerical 1 kHz noise rating is not printed in the product-page summary, so use the official family datasheet for the exact noise-density or noise-voltage value before calculating a signal-to-noise ratio.
LT1124IS8 versus OP-27 — which is better for precision signal conditioning?
The LT1124IS8 is generally the better choice when dual-channel integration and lower total power are priorities. According to Analog Devices, the LT1124 offers higher gain, slew rate, and bandwidth than the OP-27, along with lower input bias current and input offset current. A discrete pair of OP-27 amplifiers may still suit designs standardized specifically around that device.
What is the best drop-in replacement for LT1124IS8?
LT1124IS8#PBF is the closest drop-in alternative because it retains the same dual precision-amplifier function, electrical grade, and 8-pin SOIC footprint while using the manufacturer’s lead-free ordering code. LT1124AIS8, LT1124CS8, and LT1124CN8 are also pin-compatible family members, but their grade or ordering designations differ. Confirm temperature, offset, and qualification requirements before substitution.
Can LT1124AIS8 replace LT1124IS8 in an 8-pin SOIC design?
LT1124AIS8 can serve as a pin-compatible family alternative because it uses the same dual LT1124 amplifier arrangement and 8-pin SOIC footprint. The primary difference is the device grade, so verify the exact offset-voltage, temperature-range, and qualification limits against the original design requirements. A footprint match alone does not establish functional equivalence in every operating condition.
When should I choose LT1124IS8 over LT1124CS8?
Choose LT1124IS8 when the circuit requires the LT1124 industrial-grade ordering option rather than the commercial-grade LT1124CS8. Both use the same 8-pin SOIC footprint and dual precision-amplifier architecture, but their grade-specific operating limits must be checked. The correct choice depends on ambient temperature, offset requirements, qualification, and production availability.
Is LT1124IS8 suitable for instrumentation and sensor conditioning?
Yes, the LT1124IS8 is well suited to low-level instrumentation and sensor-conditioning circuits because it combines precision operation, low noise, high gain bandwidth, and two amplifier channels in one 8-pin SOIC. Its 200 µV maximum input offset voltage can support signal chains where offset error is significant, while the dual configuration can implement matched filtering or differential analog stages.
How should the LT1124IS8 be decoupled on a PCB?
Follow the bypass and power-supply recommendations in the official Analog Devices datasheet and place the specified capacitors close to the relevant supply pins. Keep sensitive inputs and high-impedance feedback nodes away from switching-current paths. The 8-pin SOIC provides a conventional surface-mount footprint, but thermal performance and loop stability remain important at high supply voltage.
Where can I buy LT1124IS8 and check its current lead time?
Use the Request a Quote form on this page to request the current LT1124IS8 price, stock position, minimum order quantity, and lead time. The form is the appropriate channel for transaction-specific availability because supply and lead time can change independently of the device’s technical specifications. The manufacturer product page remains the authoritative source for lifecycle and ordering information.
What is the price of LT1124IS8?
Request a current LT1124IS8 quotation through the Request a Quote form on this page. The form allows you to specify the required quantity and packaging so the response can reflect the correct commercial basis. Pricing for this precision amplifier can vary with order quantity, market conditions, and exact ordering suffix.
Is LT1124IS8 in stock and what is its lead time?
Submit the LT1124IS8 quantity, package, and target date through the Request a Quote form on this page for a current stock and lead-time response. Inventory status changes quickly and should not be inferred from a technical product listing. Your request can also identify whether the original non-PBF ordering code or a documented family alternative is required.
What can replace LT1124IS8?
The closest documented replacement is LT1124IS8#PBF, which preserves the LT1124IS8 electrical and 8-pin SOIC configuration while changing the ordering/finish designation. Other same-family 8-pin SOIC options include LT1124AIS8, LT1124AMPS8, LT1124CS8, and LT1124CN8. Match grade, temperature range, offset voltage, qualification, and supply requirements before approving a substitution.

داده‌های مرجع مهندسی برای LT1124IS8 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LT1124IS8 for low-level precision signal conditioning where two related channels, low noise, useful bandwidth, and lower total power than two OP-27 amplifiers are important. LT1124IS8#PBF is the closest choice when the same electrical configuration is required with the lead-free ordering designation. LT1124AIS8 may fit applications requiring a different Analog Devices grade, while LT1124CS8 and LT1124CN8 serve commercial-grade designs whose operating limits meet the system requirements. LT1124AMPS8 is relevant when its special grade characteristics are needed. For all alternatives, verify the exact offset voltage, temperature range, common-mode range, output swing, and qualification. Choose an OP-27-based implementation only when the circuit is already standardized around that device or when separate single-channel packages provide a functional advantage.

مقایسه با جایگزین‌ها

پارامتر این محصول LT1124IS8#PBF LT1124IS8-1#PBF LT1124AIS8 LT1124AMPS8 LT1124CS8 LT1124CN8
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Special Feature Individual testing of slew rate, gain bandwidth, and 1 kHz noise Individual testing of slew rate, gain bandwidth, and 1 kHz noise -1 performance designation A grade designation AMPS grade designation C grade designation C grade designation

تفاوت‌های کلیدی

  • Dual precision channels in one 8-pin SOIC (در مقابلOP27)
  • Higher gain, slew rate, and bandwidth than the OP-27 (در مقابلOP27)
  • Lower input bias current and input offset current (در مقابلOP27)
  • Per-amplifier production testing (در مقابلLT1124CS8)

یادداشت‌های طراحی

Use the manufacturer’s recommended bypass-capacitor arrangement and place each capacitor directly between its relevant supply pin and ground. Keep the two amplifier ground-return paths short and use a continuous ground plane where practical. Sensitive input and feedback nodes should remain away from the inputs of switching regulators, relay drivers, and digital clock circuits. This is especially important because the LT1124’s precision can be undermined by supply noise coupled through a long ground return.

Do not treat a shared 8-pin footprint as proof that every family grade is unconditionally interchangeable. Confirm input offset voltage, input bias current, input common-mode range, output swing, supply limits, temperature range, and qualification requirements for the exact suffix. Although all listed alternatives are pin-compatible LT1124-family devices, grade-specific limits can change the acceptable operating envelope. Record the approved alternate part number in the schematic, bill of materials, and firmware or calibration documentation when the device is not used.

Route high-impedance inputs and feedback components away from power-supply components and digital signals. Use short, narrow traces where possible, maintain a continuous reference plane, and avoid creating resistive copper stubs in sensitive nodes. For the highest precision, evaluate offset drift, input bias current, source impedance balance, and the noise contribution of external resistors after selecting the actual gain configuration. The LT1124’s low-noise architecture helps only when the surrounding circuit does not add comparable noise.

At high supply voltage and output current, bipolar precision amplifiers can dissipate meaningful power in the 8-pin SOIC. Check the amplifier’s quiescent current, output-current load, input and output voltage difference, and the resulting dissipation against the manufacturer’s thermal limits. Use the package land pattern and PCB copper area specified by Analog Devices. Provide airflow where ambient temperature, supply voltage, and continuous loading combine to create a high internal power dissipation.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The original LT1124IS8 ordering code is not the same as the documented LT1124IS8#PBF lead-free ordering variant. Confirm current RoHS, REACH, halogen-free, and conflict-minerals documentation for the exact part before production use.

جستجوهای مرتبط

LT1124IS8 datasheet LT1124IS8 datasheet pdf LT1124IS8 pinout LT1124IS8 specifications Analog Devices LT1124IS8 LT1124IS8 equivalent LT1124IS8 replacement LT1124IS8 cross reference LT1124IS8 vs OP27 LT1124IS8 price LT1124IS8 stock LT1124IS8 application circuit

قطعات و اصطلاحات مرتبط

Analog Devices Linear Technology LT1124IS8 LT1124IS8#PBF LT1124IS8-1#PBF LT1124AIS8 LT1124AMPS8 LT1124CS8 LT1124CN8 LT1125 OP27 OP270 OP470 operational amplifier precision amplifier dual amplifier low-noise amplifier high-speed amplifier analog IC signal-chain IC 8-pin SOIC SOIC family surface-mount package input offset voltage gain-bandwidth product slew rate power supply rejection RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ