M2GL005-1FG484 - 6K LEs, 209 I/O FPGA | Microchip
MPN: M2GL005-1FG484 ✓ فعالM2GL005-1FG484 نمای کلی
An FPGA is a programmable semiconductor in which the logic interconnect and digital functions can be configured after fabrication. The M2GL005 belongs to the IGLOO2 family, which combines low-density flash FPGA resources with general-purpose logic functions. Within the product hierarchy, it is an FPGA, then a programmable-logic IC, then a semiconductor. This positioning makes the device useful when fixed-function logic would require excessive board space or frequent redesign.
The IGLOO2 architecture provides 6,060 logic elements and 209 I/O, giving the design substantially more external connectivity than a small programmable logic device. Its flash configuration technology allows the programmed function to be retained without a separate configuration PROM. A 484-BGA package also supports dense routing and fine-pitch PCB layouts, although it requires careful escape-routing and assembly planning.
M2GL005 devices are intended for functions such as protocol bridging, I/O expansion, signal conversion, system management, and secure connectivity. The 209-I/O count can consolidate parallel digital interfaces, control interfaces, and communications logic into one device. Because the target package contains 484 balls, its electrical performance depends on correct bank voltage planning, clean power distribution, and controlled rise time across all supply rails.
The 1.2 V core requirement makes board-level sequencing important in systems that also operate external interfaces at higher voltages. Designers should use the manufacturer pin-description tables when assigning every ball, especially configuration pins, dedicated pins, banks, and supply pins. The IGLOO 2 packaging and pin-description guide referenced by Microchip is the appropriate document for PCB land patterns and bank assignments.
For new layouts, follow the package-specific ball map rather than relying on a generic BGA symbol. Place decoupling capacitors at every supply ball where the recommended layout permits, route high-speed nets with short return paths, and preserve the 1.0 mm terminal pitch shown for this package family. Programming, configuration density, clocking, and I/O standards must be checked against the exact device variant before schematic release.
This page combines the manufacturer product information, package and pin documentation, sourced replacement options, and application-specific design guidance. It also distinguishes the IGLOO2 M2GL005 options by package suffix and qualification coding, helping engineers identify a board-compatible replacement without overlooking device-temperature, speed-grade, or qualification requirements.
جایگزین‌های drop-in برای M2GL005-1FG484 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای M2GL005-1FG484 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Device Type, Logic Elements, Package.
M2GL005-FG484
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←M2GL005-1FGG484
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL005-1FGG484I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL005-FGG484
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←M2GL005-FGG484I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL005S-1FGG484I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL005-1FG484 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | IGLOO2 flash field-programmable gate array |
| Logic Elements | 6,060 cells |
| User I/O | 209 I/O |
| Core Supply Voltage | 1.2 V |
| بسته‌بندی | 484-pin FBGA |
| Ball Terminal Pitch | 1.000 mm |
| Package Shape | Square |
| Seated Height | 2.4400 mm |
| نوع نصب | Surface mount |
| Configuration Technology | Flash FPGA |
| Programmable Logic Density | 6 KLE |
| Target Package Type | 484-BGA |
| Manufacturer Status | In Production |
| Speed Grade | -1 |
راهنمای پیکربندی پین M2GL005-1FG484 484-bga
پیکربندی پین برای M2GL005-1FG484 (پکیج 484-bga). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای M2GL005-1FG484.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
M2GL005-1FG484 مناسب است برای 6 کاربردs: Protocol Bridging, Industrial I/O Expansion, Communications Equipment, Signal and Data Conversion, Secure Connectivity, Embedded System Management.
Protocol Bridging
The M2GL005-1FG484 is well suited to protocol bridging because its 6,060 logic elements can implement multiple interface state machines, while 209 I/O provide substantial connectivity for parallel data buses and control signals. A bridge design can place two differently timed interfaces on opposite sides of the FPGA, with the core running from 1.2 V. In the 484-BGA package, the high pin count supports compact escape routing, but bank-specific voltage limits must be checked before assigning mixed-voltage interfaces. Program the bridge logic into the flash FPGA and validate timing, contention, and reset behavior across all supported operating conditions.
پیشنهادی
Industrial I/O Expansion
For industrial I/O expansion, the M2GL005-1FG484 can consolidate many digital lines that would otherwise require separate buffers or fixed-function logic. Its 209 user I/O and 6,060 logic elements provide enough resources for input conditioning, output latching, counters, and diagnostic functions in one programmable device. The 1.2 V core simplifies integration with modern FPGA power structures, while the 484-BGA footprint minimizes board perimeter. Engineers should partition I/O into the correct voltage banks, provide deterministic power-up behavior, and verify industrial temperature and qualification requirements for the selected M2GL005 ordering code.
پیشنهادی
Communications Equipment
The M2GL005-1FG484 can support communications equipment that needs flexible parallel-to-serial logic, framing, filtering, and supervisory functions. With 6,060 logic elements and 209 I/O, it can host multiple protocol channels and board-management tasks while retaining its configuration in flash. The 1.2 V core operates efficiently in modern communication modules, and the 484-BGA package offers dense routing without requiring a large perimeter footprint. Critical implementation details include assigning I/O standards to compatible banks, controlling clock distribution, terminating high-speed interfaces correctly, and verifying the complete timing specification for the exact -1 speed-grade device.
پیشنهادی
Signal and Data Conversion
The M2GL005-1FG484 is applicable to signal and data conversion systems that need programmable widths, timing alignment, buffering, or format transformation. The 209 available I/O reduce the need for external conversion logic, and the 6,060-cell fabric can implement parallel-to-serial, serial-to-parallel, or word-format conversion pipelines. Its flash FPGA configuration allows field updates when logic requirements change, subject to normal programming procedures. Because the package is a 484-ball FBGA on a 1.000 mm pitch, the layout must account for via-in-pad restrictions, soldering process rules, and clean routing from fine-pitch balls to the available board area.
پیشنهادی
Secure Connectivity
The M2GL005-1FG484 can support secure-connectivity and board-access functions by combining programmable protocol logic, data-path control, and device-management features. The 6,060 logic elements are suitable for packet framing, command parsing, authentication-adjacent state handling, and key-loading coordination when those functions are appropriately designed and verified. Its 209 I/O allow multiple external interfaces to converge on one programmable fabric, while flash configuration supports repeatable field deployment. Security claims must be established through the system architecture and validation rather than inferred from the FPGA family name alone.
پیشنهادی
Embedded System Management
The M2GL005-1FG484 fits embedded system-management tasks such as power sequencing, status aggregation, watchdog control, interrupt routing, and board-level fault handling. Its 6,060 logic elements provide capacity for concurrent management functions, and 209 I/O reduce the number of discrete supervisory components. The 1.2 V core is compatible with a structured multi-rail power architecture, while nonvolatile flash configuration simplifies deterministic restart behavior. Because the exact operating-temperature and qualification requirements are not stated for the target ordering code, engineers should confirm those attributes before using the part in temperature-controlled or regulated end equipment.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای M2GL005-1FG484 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | M2GL005-FG484 | M2GL005-1FGG484 | M2GL005-1FGG484I | M2GL005-FGG484 | M2GL005-FGG484I | M2GL005S-1FGG484I |
|---|---|---|---|---|---|---|---|
| Package | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | M2GL005S family |
| Configuration Technology | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA |
| Ordering Suffix | -1FG484 | -FG484 | -1FGG484 | -1FGG484I | -FGG484 | -FGG484I | S-1FGG484I |
تفاوت‌های کلیدی
- High I/O density for a compact low-density FPGA (در مقابلM2GL005-FG484)
- Explicit -1 speed-grade ordering (در مقابلM2GL005-FG484)
- Closest documented same-density package option (در مقابلM2GL005-1FGG484)
یادداشت‌های طراحی
Build the PCB footprint from Microchip's package-specific IGLOO 2 documentation rather than a generic 484-BGA library entry. The package is a square FBGA with a 1.000 mm terminal pitch and a listed seated height of 2.4400 mm. Preserve the documented ball map, distinguish supply, configuration, and user-I/O balls, and follow the manufacturer's assembly and escape-routing recommendations. Verify that the board's via-in-pad and solder-mask rules support the selected assembly process.
Plan the M2GL005-1FG484 around its 1.2 V core supply and the voltage requirements of each I/O bank. Use the manufacturer bank table before assigning external signals, and do not treat every user ball as tolerant of the same voltage. Place local decoupling close to the associated supply balls, provide a low-impedance core rail, and control rail sequencing so input pins never receive an uncontrolled voltage during power-up or power-down. Confirm the final values against the device datasheet.
The target is often confused with M2GL005-1FGG484, M2GL005-FG484, M2GL005-FGG484, and other M2GL005 order codes because their family names and 484-BGA packages are similar. Treat the complete suffix as part of the component identity. Before substitution, compare speed grade, temperature range, qualification, package code, delivery format, and programming requirements. A common footprint does not by itself prove that the alternative meets the original product's operating requirements.
اطلاعات انطباق
The manufacturer listing confirms in-production status for the M2GL005 family but does not provide target-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.
