M2GL060-VF400I - 56.5K LEs, 400-BGA FPGA | Microchip
MPN: M2GL060-VF400I ✓ فعالM2GL060-VF400I نمای کلی
An FPGA is a reconfigurable digital semiconductor in which the logic, routing, and I/O behavior are defined after fabrication. Within the semiconductor hierarchy, the M2GL060 belongs to the programmable-logic device class, combining a configurable logic fabric, embedded memory, and peripheral interfaces on one integrated circuit. This integration allows one device to replace combinations of fixed-function logic, often reducing board area and simplifying product revisions.
The IGLOO2 family combines non-volatile configuration storage with programmable logic. A 400-pin VFBGA package provides extensive board-level connectivity, while 207 I/O positions support interfaces to external memories, converters, communications circuits, and control peripherals. The 56.5K logic-element count gives the design substantial parallel processing capacity without moving to a larger FPGA architecture. On-chip configuration flash also allows the device to retain its programmed logic during normal power-off operation.
Microchip describes the M2GL060 as an in-production device for cost-optimized FPGA applications. The product family targets communications, industrial, medical, defense, and aviation markets, including Gigabit Ethernet or dual PCI Express control planes, bridging, video and image processing, I/O conversion, system management, and secure connectivity. These applications benefit from programmable hardware that can be updated without changing the PCB when field requirements evolve.
The 400-pin package requires careful signal-integrity and layout planning. Designers should preserve the device's recommended power and ground distribution, use manufacturer-referenced ball assignments, and confirm that external interfaces match the selected bank voltage. Because the package exposes 207 I/O positions, connector density, bank assignment, and high-speed routing can determine whether a particular board layout fits the target application.
Before finalizing a design, verify the exact M2GL060-VF400I ordering code, supported I/O standards, speed grade, temperature grade, and power requirements against the Microchip datasheet and packaging user guide. A hardware-equivalent suffix does not necessarily preserve every commercial or environmental qualification, so confirm the complete part number before committing it to a production BOM.
This product summary combines the manufacturer family documentation, packaging guidance, device status, and manufacturer ordering information with practical considerations for PCB implementation, qualification, and sourcing. It is intended to accelerate early architecture decisions while directing detailed verification to the authoritative Microchip documents.
جایگزین‌های drop-in برای M2GL060-VF400I — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای M2GL060-VF400I (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package.
M2GL060-VFG400I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL060-VF400I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 56.5K LEs |
| User I/O | 207 I/O |
| Embedded SRAM | 32 KB |
| Core Supply Voltage | 1.2 V |
| بسته‌بندی | 400-pin VFBGA, 17 mm x 17 mm |
| Package Ball Pitch | 0.8 mm |
| نوع نصب | Surface mount |
| Configuration Technology | Fourth-generation flash-based FPGA fabric |
| Product Status | In production |
| Communications Interfaces | High-performance communications interfaces |
| Embedded Memory | 32 KB embedded SRAM |
| On-Chip Configuration Memory | Flash-based configuration storage |
| RoHS Compliance | RoHS compliant |
راهنمای پیکربندی پین M2GL060-VF400I 0.8 mm
پیکربندی پین برای M2GL060-VF400I (پکیج 0.8 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای M2GL060-VF400I.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
M2GL060-VF400I مناسب است برای 6 کاربردs: Industrial Control and System Management, Communications Interface Bridging, Video and Image Processing, I/O Expansion and Protocol Conversion, Secure Connectivity and Control Plane, Medical and Defense Instrumentation.
Industrial Control and System Management
The M2GL060-VF400I fits industrial control and system-management designs that need deterministic parallel logic, extensive external connectivity, and non-volatile configuration. Its 56.5K logic elements can support concurrent state machines, interlocks, data acquisition control, alarm logic, and communication-interface coordination, while 207 I/O positions provide ample connections to sensors, actuators, memory, and industrial converters. The 1.2 V core supply and 400-pin VFBGA package suit compact control assemblies where component count must be reduced. Flash-based configuration retains the programmed logic when power is removed, which is useful for equipment that must resume a defined control state after an interruption. Use the manufacturer’s I/O-bank, pin-description, and decoupling guidance to establish compatible voltage domains and a reliable power distribution network.
پیشنهادی
Communications Interface Bridging
The M2GL060-VF400I is suited to communications bridging because the IGLOO2 device combines 56.5K logic elements with high-performance communications interfaces and 207 I/O positions. Parallel data paths, protocol conversion, buffering, endianness conversion, and control-plane logic can be consolidated into a single programmable device. The 400-pin VFBGA exposes enough ball positions for parallel buses and multiple external interfaces, while the flash-based fabric permits field updates to protocol logic or system behavior. Designers should verify supported I/O standards and voltage assignments for each bank in the M2GL060 family documentation, then constrain all high-speed paths and complete timing analysis in the implementation toolchain.
پیشنهادی
Video and Image Processing
The M2GL060-VF400I can implement parallel video or image-processing functions where fixed-function logic would require several devices or a later PCB revision. The 56.5K logic elements are useful for pixel pipelines, timing generators, color-space conversion, thresholding, filtering, and interface timing, while 207 I/O positions support parallel image data and control signals. Its non-volatile flash configuration allows a deployed system to be updated with revised algorithms or interface behavior. The 400-pin VFBGA requires careful escape-routing because its 0.8 mm ball pitch limits access between adjacent pads. Confirm the device’s supported I/O standards, bank voltages, timing constraints, and performance grades before using the part in a video pipeline.
پیشنهادی
I/O Expansion and Protocol Conversion
The M2GL060-VF400I is a strong candidate for I/O expansion and protocol conversion because its 207 user I/O positions and multiple programmable logic banks can accommodate legacy parallel logic alongside newer serial interfaces. Engineers can implement latch banks, level-formatting logic, bus arbitration, status registers, and protocol state machines in one device instead of combining several fixed-function ICs. The 56.5K logic-element capacity also provides room for diagnostics and control around each interface. Use the exact 400-ball assignment from Microchip’s packaging guide to identify bank membership and avoid conflicts between incompatible voltage standards. Validate every external transceiver’s direction, drive strength, and timing requirements against the corresponding M2GL060 bank characteristics.
پیشنهادی
Secure Connectivity and Control Plane
The M2GL060-VF400I can serve as a programmable secure-connectivity and control-plane device for communications, industrial, and defense-related subsystems. Its 56.5K logic elements allow authentication sequencing, packet pre-processing, command filtering, state tracking, and peripheral control to be implemented in flash-configured logic. The 400-pin package offers extensive connections to secure transceivers, memory, and control processors, while the IGLOO2 architecture avoids an external configuration PROM. Designers should partition sensitive logic according to the implementation tool’s supported design methods, review the appropriate security documentation, and confirm that the selected ordering suffix meets the deployment’s environmental and procurement requirements. Timing closure and external interface verification remain essential before production release.
پیشنهادی
Medical and Defense Instrumentation
The M2GL060-VF400I fits programmable instrumentation and embedded control systems that require high logic density, extensive I/O, and field-reconfigurable behavior. Potential functions include sensor conditioning control, acquisition sequencing, timing generation, data packing, fault monitoring, and communication framing. Its 32 KB of embedded SRAM supports buffering and working data, while 207 I/O positions can connect converters, memories, and interface devices. Because medical and defense deployments can impose extended-temperature, radiation, or qualification requirements beyond the standard ordering code, engineers must verify the exact grade and applicable certification for each program. The 400-pin VFBGA also demands a disciplined escape-routing and plane-integrity strategy to preserve signal and power performance.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای M2GL060-VF400I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | M2GL060-VFG400I |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 400-pin VFBGA, 17 mm x 17 mm | 400-pin VFBGA, 17 mm x 17 mm |
| Package Ball Pitch | 0.8 mm | 0.8 mm |
| FPGA Family | IGLOO2 | IGLOO2 |
| Logic Elements | 56.5K LEs | 56.5K LEs |
| User I/O | 207 I/O | 207 I/O |
| Embedded SRAM | 32 KB | 32 KB |
| Core Supply Voltage | 1.2 V | 1.2 V |
| Configuration Technology | Flash-based FPGA fabric | Flash-based FPGA fabric |
تفاوت‌های کلیدی
- Dense programmable logic in a compact 400-pin package (در مقابلM2GL060-VFG400I)
- On-chip flash configuration removes a separate configuration PROM (در مقابلM2GL060-VFG400I)
- Extensive high-pin-count connectivity for parallel and mixed interfaces (در مقابلM2GL060-VFG400I)
یادداشت‌های طراحی
Create the 400-pin VFBGA footprint from Microchip’s package mechanical drawing rather than a generic BGA outline. The 17 mm x 17 mm body and 0.8 mm ball pitch require exact pad and solder-mask geometry. Because each row of balls is separated by only 0.8 mm, use the recommended escape-routing pattern, preferably with through vias or microvias placed according to the manufacturer’s land pattern. Validate the complete stack-up with signal-integrity and power-integrity simulations before fabrication.
Follow the datasheet’s recommended core and I/O supply topology, including the required voltage for each bank and the placement of decoupling and bulk capacitance. The M2GL060-VF400I uses a 1.2 V core supply, while external interfaces may require other bank voltages. Treat each supply domain as a separate power plane and avoid routing high-current return paths through the same areas used for sensitive logic. Confirm steady-state and transient current against the design’s clocking, I/O activity, and environmental assumptions.
Assign user I/O by bank and voltage compatibility using the manufacturer’s pin-description guide. Apply source-synchronous, parallel-bus, and high-speed serial constraints consistently in the layout and timing analysis. The 0.8 mm pitch package offers limited escape-routing space, so reserve routing channels before placing external support components. Keep clocks away from noisy power-conversion regions and use the shortest practical return paths beneath high-speed traces.
Do not treat M2GL060-VF400I and M2GL060-VFG400I as automatically interchangeable based only on their shared 400-pin package. Before substitution, compare the complete ordering codes for speed, temperature, commercial status, and any other suffix-specific attributes. Also verify the numbered ball assignments, supported I/O standards, and bank voltage requirements for the exact device. A correct footprint does not compensate for an incorrect function, grade, or I/O configuration.
اطلاعات انطباق
The cross-reference comparison identifies the target as RoHS compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were established for the exact ordering code.
