M2GL090-1FG676 - 86K IGLOO2 FPGA with 425 I/O | Microchip
MPN: M2GL090-1FG676 ✓ فعالM2GL090-1FG676 نمای کلی
An FPGA is a digital semiconductor whose logic, interconnects, and I/O behavior are configured after manufacture. In the device hierarchy, an FPGA sits above fixed-function logic and below application-specific SoCs. Its reconfigurable fabric allows designers to implement parallel processing, control logic, protocol handling, signal conditioning, and interface bridging in one device while shortening board-development cycles.
The M2GL090 belongs to the IGLOO2 family and is identified as a low-density FPGA offering 86K logic elements. Its 425 I/O provide substantial board-level connectivity, while the 1.2 V supply specification identifies it as a modern low-voltage programmable-logic device. The 676-ball FBGA package supports fine-pitch, high-density assembly but requires careful PCB layout, via-in-pad-compatible manufacturing, and thermal analysis.
Technically, the IGLOO2 architecture is suited to designs that benefit from reconfigurable hardware rather than repeated firmware changes alone. The verified component listings identify 86,316 cells, 425 I/O, and the M2GL090 series designation. Detailed RAM, flash, PLL, I/O-standard, security, and performance values are not included in the supplied source data and should be confirmed in the official M2GL090 documentation before design release.
Typical uses include industrial control, factory automation, communications infrastructure, embedded instrumentation, and compact control systems that need many parallel I/O and moderate programmable-logic density. The large I/O count can also simplify connections among sensors, relays, converters, memory, and external processors when board space is constrained.
The primary design consideration is PCB manufacturability. A 676-ball FBGA requires a fine-pitch land pattern, adequate solder-mask and paste control, and power and ground distribution that minimizes voltage drop. Designers should also verify every bank supply, configuration interface, and I/O standard against the official packaging and pin-description guide.
This page consolidates verified distributor specifications, an exact industrial-temperature variant, same-family drop-in candidates, comparison parameters, and practical assembly guidance. It extends the basic catalog data with design-focused context while clearly separating verified facts from parameters that still require manufacturer-document confirmation.
جایگزین‌های drop-in برای M2GL090-1FG676 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای M2GL090-1FG676 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Logic Elements.
M2GL090-1FG676I
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL090-FG676
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←M2GL090T-1FG676
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL090TS-1FG676
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
M2GL090-FGG676
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←M2GL090-1FG676 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | IGLOO2 low-density FPGA |
| Series | M2GL090 |
| Programmable Cells | 86,316 cells |
| Logic Elements | 86,184 LE |
| Number of I/O | 425 I/O |
| ولتاژ تغذیه کاری | 1.2 V |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | +85 °C |
| بسته‌بندی | 676-ball FBGA |
| Package Designation | FPBGA-676 |
| سبک نصب | SMD/SMT |
| Packaging | Tray |
| Manufacturer | Microchip Technology |
| Product Category | FPGA - Field Programmable Gate Array |
راهنمای پیکربندی پین M2GL090-1FG676 fpbga-676
پیکربندی پین برای M2GL090-1FG676 (پکیج fpbga-676). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای M2GL090-1FG676.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
M2GL090-1FG676 مناسب است برای 6 کاربردs: Industrial Automation Controller, Communications and Protocol Bridging, Test and Measurement Instrumentation, Embedded Security and Access Control, Industrial Networking Gateway, Low-Power Embedded Control Platform.
Industrial Automation Controller
The M2GL090-1FG676 fits industrial automation systems that combine many discrete inputs and outputs with programmable control logic. Its verified 425 I/O can support sensor inputs, actuator outputs, interlocks, counters, and machine sequencing, while 86,316 cells provide substantially more logic capacity than a small CPLD. The device operates from a 1.2 V supply in a 676-ball FBGA package, allowing control, timing, and communications functions to be consolidated on one fine-pitch PCB. Its cataloged 0 °C to +85 °C range suits commercial-temperature factory equipment. Confirm the complete power architecture, I/O standards, and timing margins in Microchip's official M2GL090 documentation before production release.
پیشنهادی
Communications and Protocol Bridging
The M2GL090-1FG676 is suitable for compact communications equipment requiring parallel interfaces, protocol conversion, and extensive programmable logic. Its 425 I/O provide connections for multiple data buses, control signals, status indicators, and configuration interfaces, while the 86,316-cell fabric can implement parallel-to-serial logic, packet routing, and data framing. Placing these functions in the 1.2 V IGLOO2 device can reduce reliance on separate glue logic. The 676-ball FBGA package demands careful high-speed layout, but its fine-pitch connectivity supports compact routing. Signal-integrity, supported I/O standards, and timing constraints should be verified against the manufacturer pin and timing documentation.
پیشنهادی
Test and Measurement Instrumentation
The M2GL090-1FG676 can serve in data-acquisition and test-instrument front ends where many parallel signals must be sampled, conditioned, and routed. Its 425 I/O permit connection of sensors, counters, triggers, capture signals, and digital interfaces, while 86,316 cells support timing, state machines, and parallel processing. The 1.2 V device supports integration with modern mixed-signal systems without implementing the complete instrument as fixed-function logic. The 676-ball FBGA footprint provides dense connectivity but requires a high-quality assembly process and careful return-path planning. Verify acquisition-edge performance, I/O voltage compatibility, clocking resources, and thermal behavior using the official IGLOO2 documentation.
پیشنهادی
Embedded Security and Access Control
The M2GL090-1FG676 is appropriate for access-control and embedded security controllers that require substantial parallel I/O and configurable logic. Its 425 I/O can support readers, lock controls, indicators, network-facing interfaces, and event-processing functions, while 86,316 cells allow protocol handling and decision logic to be consolidated. Reconfigurable logic also permits controlled updates to algorithms and interface behavior. The target's cataloged 0 °C to +85 °C range supports commercial-temperature indoor equipment. Because security qualifications and cryptographic implementation details were not included in the supplied data, engineers must separately verify device security features, configuration protections, and any applicable compliance requirements before using the FPGA as a security boundary.
پیشنهادی
Industrial Networking Gateway
The M2GL090-1FG676 fits industrial gateway designs that translate between multiple digital interfaces and require extensive parallel connectivity. Its 425 I/O support status signals, control outputs, memory interfaces, and protocol I/O, while 86,316 cells allow routing and packet transformation to be implemented in programmable hardware. This can reduce processor workload and provide deterministic hardware-level handling. Operating from a 1.2 V supply supports integration into modern embedded systems, but the 676-ball FBGA package requires controlled impedance routing, solid return paths, and precise power-plane design. Network timing, supported I/O standards, transceiver requirements, and environmental limits must be validated against the official device documentation and the selected network specifications.
پیشنهادی
Low-Power Embedded Control Platform
The M2GL090-1FG676 supports embedded control platforms where a microcontroller handles software while the FPGA manages parallel I/O, specialized timing, or an accelerator function. The verified 86,316 cells and 425 I/O allow substantial hardware assistance without requiring a larger external logic device, and the 1.2 V operating supply fits contemporary power architectures. System partitioning can improve responsiveness by moving repetitive or timing-sensitive operations into the FPGA fabric. The fine-pitch 676-ball FBGA package complicates assembly and prototype rework, so PCB design must account for escape routing, simultaneous switching noise, and component placement. Actual power consumption, available RAM, configuration methods, and clock resources remain subject to official data-sheet confirmation.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای M2GL090-1FG676 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | M2GL090-1FG676I | M2GL090-FG676 | M2GL090T-1FG676 | M2GL090TS-1FG676 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA |
| Series | M2GL090 IGLOO2 | M2GL090 IGLOO2 | M2GL090 IGLOO2 | M2GL090 IGLOO2 | M2GL090 IGLOO2 |
| Special Features | Reconfigurable IGLOO2 FPGA | Reconfigurable IGLOO2 FPGA | Reconfigurable IGLOO2 FPGA | Reconfigurable IGLOO2 FPGA | Reconfigurable IGLOO2 FPGA |
تفاوت‌های کلیدی
- Exact verified resource configuration (در مقابلM2GL090-1FG676I)
- Explicit commercial-temperature cataloging (در مقابلM2GL090-1FG676I)
- High I/O density in a 676-ball package (در مقابلM2GL090-FG676)
- Substantial programmable logic for embedded control (در مقابلM2GL090-FG676)
یادداشت‌های طراحی
Treat the 676-ball FBGA as a fine-pitch assembly, not a conventional peripheral BGA. Use the official Microchip package drawing and pin-description guide to establish the land pattern, ball map, and mechanical tolerances. Place decoupling capacitors close to the relevant supply pins and connect every ground ball according to the manufacturer recommendation. Confirm the PCB fabricator's ball-pitch, via-in-pad, solder-mask, and paste-capability requirements before releasing artwork.
The verified operating supply is 1.2 V, but the package still requires a carefully designed power distribution network. Separate analog and digital supply paths where the device supports them, keep high-current return paths continuous, and use multiple connection points between each rail and its corresponding package balls. Validate voltage tolerance, sequencing, startup current, and external-regulator headroom using the official M2GL090 documentation; those detailed limits are not present in the supplied source data.
Route clocks and high-speed interfaces on controlled-impedance layers with continuous reference planes and the shortest practical paths. Avoid placing test points or package changes directly beneath sensitive nets, and maintain adequate clearance from switching-power stages. For each external signal, confirm the supported voltage standard, drive strength, slew behavior, and timing constraints in the manufacturer documentation. The 425 I/O count does not imply that every pin supports every I/O standard or operates at the same maximum rate.
Do not substitute an ordering variant based only on the IGLOO2 family name and 676-ball package. M2GL090-1FG676I is the closest verified candidate, but its exact temperature limits, configuration behavior, and complete ordering information must be checked. Also verify that the source design's bitstream remains valid across the substitution, that the PCB ball map is identical, and that supply sequencing is unchanged. These checks prevent a nominal drop-in candidate from becoming an unqualified production substitution.
اطلاعات انطباق
The supplied web data does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because no automotive qualification claim was supplied.