Maxim Integrated

MAX3221ECTE+ - 3V/5V RS-232 Transceiver | Maxim Integrated

MPN: MAX3221ECTE+ ✓ فعال
3.0 V to 5.5 V Vdss 1 A Id 16-pin TQFN Package
حداقل سفارش: 1 |

MAX3221ECTE+ نمای کلی

The Maxim Integrated MAX3221ECTE+ is a 3 V to 5.5 V RS-232 transceiver supporting data rates up to 250 kbps in a 16-pin TQFN package measuring 5 mm by 5 mm. The device combines one RS-232 transmitter, one receiver, ±15 kV ESD protection, and automatic shutdown and wakeup functions in a single integrated interface IC. It is designed for compact equipment requiring a standards-compliant EIA/TIA-232 connection between a host UART and an external data cable.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 levels back into logic-compatible signals. The MAX3221ECTE+ operates from a single 3.0 V to 5.5 V supply, making it suitable for systems using either 3.3 V or 5 V logic. Its automatic shutdown circuitry reduces supply demand when the interface is inactive, while wakeup support allows operation to resume when valid serial data arrives.

The principal electrical features include a maximum data rate of 250 kbps, ±15 kV ESD protection, and a shutdown current of 1 µA. The integrated protection is particularly valuable in industrial control, instrumentation, and data-acquisition equipment where an RS-232 connector may be exposed to electrostatic discharge. The device also supports EIA/TIA-232 and V.28/V.24 communication requirements while presenting a compact, board-space-efficient interface to the host controller.

MAX3221ECTE+ combines a transmitter and receiver in one package, avoiding separate logic-level conversion devices for each direction. The 5 mm by 5 mm TQFN footprint supports dense control boards, but its exposed pad requires careful PCB layout and adequate thermal dissipation. Charge-pump circuitry internally develops the positive and negative RS-232 voltage levels needed by the transmitter, so the application circuit requires the external components and connections specified by the manufacturer datasheet.

Typical uses include industrial serial controllers, test and measurement equipment, POS terminals, embedded serial bridges, and isolated or long-distance RS-232 links. At 250 kbps, the interface is fast enough for moderate-speed telemetry and configuration traffic while maintaining compatibility with conventional RS-232 ports. For designs operating from 5 V, the wide 3.0 V to 5.5 V supply range also provides flexibility when the host uses a lower-voltage rail.

Use the manufacturer pin description and application circuit when assigning the TQFN land pattern, connecting the exposed pad, and placing bypass or charge-pump capacitors. Keep the interface path away from sensitive analog signals, provide a low-impedance ground connection, and keep external cables and connectors as short as practical. ESD protection reduces connector risk but does not replace correct grounding, shielding, and surge-protection design.

This page consolidates the device specifications, verified package information, sourcing guidance, drop-in alternatives, and practical RS-232 layout considerations. It also distinguishes the electrically useful alternatives from package or temperature options that require additional design review before substitution.

جایگزین‌های drop-in برای MAX3221ECTE+ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX3221ECTE+ (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type.

Analog Devices
Package: 16-pin TQFN, 5 mm x 5 mm
Product Type: RS-232 Transceiver
مقایسه با MAX3221ECTE+ →

MAX3221EETE+

✅ جایگزین مستقیم
📦 16-pin TQFN
Identical stated 3.0 V to 5.5 V supply, 250 kbps rate, and ±15 kV ESD rating; ordering suffix may change temperature or shipping details

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX3221ECTE+ مشخصات

Product Type Single RS-232 transceiver
Transmitter Count 1
Receiver Count 1
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
RS-232 Driver Output Current 1 A
ESD Protection ±15 kV
Shutdown Supply Current 1 µA
Communication Standard EIA/TIA-232 and V.28/V.24
Automatic Shutdown and Wakeup Yes
محدوده دمای کاری 0 °C to 70 °C
بسته‌بندی 16-pin TQFN
Package Dimensions 5 mm × 5 mm
نوع نصب Surface mount
Packing Method Tape reel

راهنمای پیکربندی پین MAX3221ECTE+ 5 mm × 5 mm

پیکربندی پین برای MAX3221ECTE+ (پکیج 5 mm × 5 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 5 mm × 5 mm برای MAX3221ECTE+

داده پین‌آوت تفصیلی موجود نیست برای MAX3221ECTE+.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX3221ECTE+ مناسب است برای 6 کاربردs: Industrial Serial Control Interface, Test and Measurement Equipment, Data Acquisition and Monitoring, Point-of-Sale and Retail Equipment, Communication and Network Equipment, Embedded Serial Port Expansion.

🏭

Industrial Serial Control Interface

The MAX3221ECTE+ fits industrial controllers that exchange commands and telemetry over an RS-232 connection. Its 3.0 V to 5.5 V supply range allows use beside either 3.3 V or 5 V digital logic, while the 250 kbps maximum rate provides ample margin for supervisory and configuration traffic. The integrated ±15 kV ESD protection reduces vulnerability at an accessible connector. Place the transceiver close to the connector, maintain a continuous return path, and use the manufacturer charge-pump capacitor layout to achieve reliable operation.

🖥️

Test and Measurement Equipment

The MAX3221ECTE+ is appropriate for programmable instruments and test systems that need a compact host-to-instrument serial link. A 250 kbps interface supports moderate-speed commands and measurement data without requiring a separate level converter for each signal direction. Its ±15 kV ESD protection is useful on bench equipment where users repeatedly connect external cables. Keep the connector and transceiver separated from sensitive analog sections, provide solid grounding, and verify that the 0 °C to 70 °C ordering option matches the instrument environment.

🧩

Data Acquisition and Monitoring

The MAX3221ECTE+ can bridge a controller UART to an RS-232 monitoring network where cable reach exceeds the logic-level interface range. The device's automatic shutdown and wakeup behavior helps control standby demand, while its 250 kbps capability is suitable for periodic telemetry and configuration records. The exposed-pad TQFN package needs an uninterrupted ground connection and adequate copper area for reliable heat spreading. Confirm capacitor placement and line-driver enable behavior against the manufacturer application circuit before production release.

🔧

Point-of-Sale and Retail Equipment

The MAX3221ECTE+ suits compact retail peripherals that use an RS-232 port for configuration, service, or legacy equipment integration. Its small 5 mm by 5 mm TQFN footprint leaves more PCB area than a larger SOIC transceiver, and the 3.0 V to 5.5 V operating range supports common embedded-controller supplies. The ±15 kV ESD rating helps protect a user-accessible port, although the enclosure, connector shell, and protective ground remain important. Validate the exact temperature grade required for the deployed retail environment.

🌐

Communication and Network Equipment

The MAX3221ECTE+ is useful in communication equipment that exposes an RS-232 service or management port alongside Ethernet, wireless, or embedded control functions. The integrated transmitter and receiver reduce the footprint needed for a bidirectional serial interface, and operation from a single 3.0 V to 5.5 V rail simplifies system power planning. Its 250 kbps maximum rate is appropriate for management and diagnostic traffic rather than high-throughput bulk transfer. Route the protected cable interface away from high-speed digital clocks and switching-node power stages.

📱

Embedded Serial Port Expansion

The MAX3221ECTE+ provides a compact way to add a standards-compliant RS-232 port to a microcontroller or application processor that otherwise exposes only UART logic levels. A 250 kbps link supports configuration logs, firmware-service traffic, and routine control commands. Automatic shutdown and wakeup can reduce demand during idle periods, while ±15 kV ESD protection improves robustness at a service connector. Ensure the host UART voltage levels match the transceiver thresholds and follow the manufacturer guidance for bypass, charge-pump, and exposed-pad connections.

What is the MAX3221ECTE+?
The MAX3221ECTE+ is a single-channel RS-232 transceiver combining one transmitter, one receiver, automatic shutdown, and ±15 kV ESD protection. According to the Maxim Integrated product information, it operates from 3.0 V to 5.5 V, supports data rates up to 250 kbps, and is offered in a 16-pin TQFN package measuring 5 mm by 5 mm. It converts host UART logic levels to RS-232 levels and converts received RS-232 signals back to logic levels.
What is the operating voltage of MAX3221ECTE+?
The MAX3221ECTE+ operates from 3.0 V to 5.5 V. This range supports 3.3 V and 5 V systems without requiring a separate RS-232 line-driver supply. The manufacturer lists the MAX3221E family as a 3 V-powered EIA/TIA-232 and V.28/V.24 communications interface, with automatic shutdown and wakeup functions. Confirm the complete operating limits, decoupling requirements, and logic thresholds in the manufacturer datasheet before finalizing the power architecture.
How fast is the MAX3221ECTE+ RS-232 interface?
The MAX3221ECTE+ supports RS-232 data rates up to 250 kbps. That bandwidth is suitable for UART-based configuration, telemetry, control, and data-transfer links that do not require higher signaling speeds. The 250 kbps figure is the device's stated maximum interface rate; the actual usable system rate also depends on the connected UART, cable characteristics, grounding, noise margin, and receiver timing. Use the manufacturer application guidance when setting baud-rate margins.
What ESD protection does MAX3221ECTE+ provide?
The MAX3221ECTE+ provides ±15 kV ESD protection on its RS-232 interface. The protection rating is a key feature for equipment with an accessible serial connector because electrostatic discharge can otherwise damage the transceiver or the connected controller. ESD protection does not eliminate the need for a solid ground, suitable connector grounding, cable routing discipline, or additional surge protection. Confirm which pins carry the stated rating in the manufacturer datasheet.
What package does MAX3221ECTE+ use?
The MAX3221ECTE+ uses a 16-pin TQFN surface-mount package with dimensions of 5 mm by 5 mm. The compact package includes an exposed thermal pad that must be connected according to the manufacturer layout guidance. A TQFN footprint is not interchangeable with SOIC, SSOP, or smaller TQFN packages without changing the PCB land pattern. Use the package drawing and pin-description table when assigning tracks and vias.
Where can I download the MAX3221ECTE+ datasheet PDF?
The MAX3221ECTE+ datasheet PDF is available from the Maxim Integrated MAX3221E product-page resources and from the listed documentation link. The document provides the electrical characteristics, pin descriptions, ESD ratings, typical charge-pump application circuit, and recommended PCB layout. A mirror of the manufacturer PDF is also listed on this page for convenience. Use the manufacturer document as the controlling reference whenever mirrored copies differ.
Where can I find the MAX3221ECTE+ pinout?
The MAX3221ECTE+ pinout is defined by the manufacturer datasheet's pin-description table and package drawing. The device is housed in a 16-pin TQFN package, so its land pattern contains 16 perimeter pins plus the exposed thermal pad. Because the verified product pages do not reproduce the numbered pin descriptions, use the manufacturer pin table when assigning power, ground, UART, charge-pump, and exposed-pad connections. Do not infer the pinout solely from the package outline.
What can replace the MAX3221ECTE+?
The MAX3221EETE+ is the closest documented drop-in replacement for the MAX3221ECTE+ because the comparison information describes consistent terminals and packages. A complete substitution must still be checked for temperature grade, supply limits, shutdown behavior, exposed-pad requirements, and production availability. Use the Request a Quote form on this page to identify the exact suffix and package variant needed for your design rather than relying only on the base family name.
Is MAX3221ECTE+ compatible with MAX3221EETE+?
The MAX3221ECTE+ and MAX3221EETE+ are identified as compatible 16-pin RS-232 transceivers with consistent performance characteristics, terminals, and package construction. Compatibility should still be confirmed against the exact ordering codes, especially the commercial temperature range and lead-free packaging suffix. Before substitution, compare the manufacturer pin tables and exposed-pad layout, and verify that every PCB land pattern remains unchanged.
When should I choose MAX3221ECTE+ over a basic RS-232 transceiver?
Choose the MAX3221ECTE+ when a compact design benefits from a combined 3.0 V to 5.5 V supply, automatic shutdown and wakeup, ±15 kV ESD protection, and operation up to 250 kbps. Its 16-pin 5 mm by 5 mm TQFN package is particularly useful when board space is limited. A basic transceiver may be preferable only when the required protection, speed, shutdown behavior, or package differs enough that the MAX3221ECTE+ provides no functional benefit.
Is MAX3221ECTE+ suitable for industrial serial controllers?
The MAX3221ECTE+ is suitable for industrial serial controllers that need a 3.3 V or 5 V interface, RS-232 operation, and ±15 kV ESD protection. Its 250 kbps maximum data rate and automatic shutdown function suit control links, test equipment, and data-acquisition products. Industrial suitability still depends on the required ambient-temperature range, enclosure and cable protection, isolation strategy, and the system’s electromagnetic-compatibility requirements.
How do MAX3221ECTE+ and MAX3221EETE+ differ?
The principal documented distinction is the ordering suffix, which can encode package, temperature, and shipping information, while the MAX3221ECTE+ and MAX3221EETE+ comparison describes consistent functionality, terminals, and packages. The MAX3221ECTE+ is identified as a 16-pin 5 mm by 5 mm TQFN device with a 0 °C to 70 °C operating range. Review the exact ordering-information table before approving either part, especially for extended-temperature or automotive requirements.
Where can I buy MAX3221ECTE+ online?
Use the Request a Quote form on this page to request MAX3221ECTE+ pricing, current availability, lot information, and the required packaging suffix. The form allows the request to be matched to the exact 16-pin TQFN ordering code without relying on a generic family listing. Commercial terms and lead time can vary with quantity, date code, and package form, so request confirmation for the production quantity rather than assuming inventory from a family-level page.
What is the price of MAX3221ECTE+?
Use the Request a Quote form on this page for the current MAX3221ECTE+ price and volume breaks. Pricing is rendered from the platform’s structured commercial data and should be confirmed against the exact MPN, package suffix, quantity, and required shipping terms. The commercial team can also confirm date-code and lot requirements. Do not substitute a price associated with MAX3221ECTE+T or another family member because its ordering suffix may represent different packing.
What is the lead time and stock status of MAX3221ECTE+?
Use the Request a Quote form on this page to request current stock, lead time, and allocation information for the exact MAX3221ECTE+ ordering code. The device is shown by current product listings as an active part, but that status does not guarantee a fixed quantity at every distribution location. Production planning should request a date-code and packaging confirmation, especially for scheduled builds or multi-lot consolidation.
What are the key specifications of MAX3221ECTE+ that engineers should know?
The MAX3221ECTE+ is a one-transmitter, one-receiver RS-232 interface IC rated for 3.0 V to 5.5 V operation and data rates up to 250 kbps. Its principal protection and power features are ±15 kV ESD protection and 1 µA shutdown current. The device uses a 16-pin, 5 mm by 5 mm TQFN surface-mount package and supports automatic shutdown and wakeup. The exposed pad and external capacitor connections must follow the manufacturer layout guidance.

داده‌های مرجع مهندسی برای MAX3221ECTE+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MAX3221ECTE+ for a compact 3.3 V or 5 V design that needs one bidirectional RS-232 port, operation up to 250 kbps, automatic shutdown, and ±15 kV ESD protection. Its 16-pin 5 mm by 5 mm TQFN package is appropriate when PCB area is constrained and the board can provide the required exposed-pad layout. MAX3221EETE+ is the closest documented drop-in candidate when its exact ordering suffix satisfies the temperature, packaging, and availability requirements. MAX3221ECTE+T should be selected only when tape-reel packing is required; it is not an engineering upgrade over the target. MAX3221IDBR and MAX3221CAE+T are not direct drop-in choices because their package constructions differ. For any alternate device, verify the pin table, exposed-pad connection, operating temperature, charge-pump capacitors, and ESD rating before schematic release.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX3221EETE+
Package 16-pin TQFN, 5 mm × 5 mm 16-pin TQFN
Brand Maxim Integrated Maxim Integrated
Supply Voltage 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps
ESD Protection ±15 kV ±15 kV
Transmitter and Receiver Count 1 transmitter, 1 receiver 1 transmitter, 1 receiver
Automatic Shutdown and Wakeup Yes Yes
Interface Standard EIA/TIA-232, V.28/V.24 EIA/TIA-232, V.28/V.24

تفاوت‌های کلیدی

  • Combines full-duplex RS-232 conversion with low-power automatic operation (در مقابلMAX3221EETE+)
  • Operates directly from 3.3 V or 5 V system rails (در مقابلMAX3221EETE+)
  • Provides connector-side electrostatic-discharge protection (در مقابلMAX3221EETE+)

یادداشت‌های طراحی

Follow the manufacturer TQFN land pattern exactly, including the exposed thermal pad and its via arrangement. Keep the RS-232 connector and transceiver away from switching regulators, high-speed clocks, and sensitive analog inputs. Route the ground return continuously toward the connector ground because the shared return path affects noise immunity. Place the required bypass and charge-pump capacitors close to their associated device pins using the shortest practical traces.

The MAX3221ECTE+ accepts a 3.0 V to 5.5 V supply, but the selected rail must satisfy the device's operating range under startup, data transmission, and shutdown transitions. Provide local decoupling and verify that the supply remains within limits when the RS-232 transmitter changes state. Do not substitute a lower-voltage source without checking both logic-level compatibility and the datasheet operating conditions.

Do not treat the MAX3221ECTE+ and MAX3221EETE+ base-family descriptions as sufficient evidence for an unrestricted substitution. Compare the exact ordering code, temperature range, exposed pad, land pattern, and lead-free status before releasing a replacement to production. MAX3221ECTE+T is a distinct ordering suffix associated with tape-reel packing, and MAX3221IDBR and MAX3221CAE+T use different package constructions, so they cannot replace the target without PCB or pin-function review.

Place the interface connector close to the transceiver but keep the RS-232 traces away from unprotected low-level inputs elsewhere on the board. Use a solid plane or wide trace for the ground return and avoid long stubs from the connector shell. ESD protection improves survivability but must be combined with proper enclosure grounding, cable management, and, where required, external surge or overvoltage protection.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The MAX3221ECTE+ is a commercial-temperature RS-232 interface IC for general-purpose equipment. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product information, so those statuses remain unknown. AEC-Q100 qualification is not applicable to the stated general-purpose product category.

تاریخ تأیید داده‌ها: 2026-11-13 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX3221ECTE+ datasheet MAX3221ECTE+ datasheet pdf MAX3221ECTE+ pinout MAX3221ECTE+ specifications MAX3221ECTE+ equivalent MAX3221ECTE+ replacement MAX3221ECTE+ cross reference MAX3221ECTE+ vs MAX3221EETE+ MAX3221ECTE+ price MAX3221ECTE+ stock Maxim Integrated MAX3221ECTE+ MAX3221ECTE+ 250kbps RS-232 MAX3221ECTE+ 16-TQFN footprint MAX3221ECTE+ industrial serial interface MAX3221ECTE+ schematic

قطعات و اصطلاحات مرتبط

Maxim Integrated MAX3221ECTE+ MAX3221EETE+ MAX3221ECTE+T RS-232 transceiver EIA/TIA-232 V.28 V.24 interface IC semiconductor UART transmitter receiver automatic shutdown automatic wakeup ESD protection data rate supply voltage shutdown current TQFN-16 QFN family surface mount SMD exposed thermal pad industrial automation
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ