MAX3232ECDG4 - 2/2 RS-232 Transceiver | Texas Instruments
MPN: MAX3232ECDG4 ✓ فعالMAX3232ECDG4 نمای کلی
An RS-232 transceiver is an interface IC that converts digital logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where it bridges computer or embedded systems with the physical RS-232 bus. Its dual-driver, dual-receiver arrangement supports point-to-point links and multi-drop receiver networks while reducing the number of external interface components.
The MAX3232ECDG4 operates from 3 V to 5.5 V and is designed for 250 kbps RS-232 data rates. Its integrated charge-pump circuitry supports operation from a single supply, eliminating the need for a separate negative-voltage supply in the host design. The two drivers and two receivers support common applications involving serial ports, data acquisition, industrial control, and embedded equipment.
Electrical protection is a major feature of this interface. According to the Texas Instruments datasheet, the RS-232 bus pins provide ±15 kV ESD protection under the IEC contact-discharge and air-discharge conditions. This protection helps improve system survivability when a connected cable exposes the interface to electrostatic discharge. The IC is specified for a 0 °C to 70 °C operating-temperature range.
The MAX3232ECDG4 is used in industrial serial communication, test and measurement equipment, point-of-sale terminals, security systems, and embedded control systems. Its 16-pin SOIC package is suitable for conventional surface-mount assembly and PCB layouts that already use narrow SOIC-16 footprints.
When designing around the MAX3232ECDG4, verify the RS-232 connector-side protection network and place it where it can intercept electrostatic discharge before the signal reaches the IC. Keep the high-current charge-pump and driver return paths compact, and follow the manufacturer’s capacitor recommendations to maintain stable operation. Confirm that cable routing, grounding, and logic levels satisfy the system interface specification.
This page combines manufacturer specifications, verified distributor listings, package information, drop-in comparison options, and practical PCB guidance. It is intended to help engineers evaluate the MAX3232ECDG4 for new designs and to identify a compatible replacement only after checking the complete datasheet, pin configuration, package, and operating requirements.
جایگزینهای drop-in برای MAX3232ECDG4 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MAX3232ECDG4 (همان فرمفاکتور و فوتپرینت) — متفاوت در ESD Protection, Transceiver Configuration.
MAX3232EIDR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MAX3232ECD
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MAX3232ECDG4 مشخصات
| Device Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3 V to 5.5 V |
| نرخ داده | 250 kbps |
| ESD Protection | ±15 kV IEC ESD |
| بستهبندی | 16-pin SOIC |
| Package Width | 3.90 mm |
| نوع نصب | Surface mount |
| محدوده دمای کاری | 0 °C to 70 °C |
| Protocol | RS-232 |
| Transceiver Configuration | 2/2 full-duplex |
| Series | MAX3232 |
| Packaging | Tube |
| Lead-Free Status | Lead-free |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین MAX3232ECDG4 3.90 mm
پیکربندی پین برای MAX3232ECDG4 (پکیج 3.90 mm). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای MAX3232ECDG4.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MAX3232ECDG4 مناسب است برای 6 کاربردs: Industrial RS-232 Control Interfaces, Embedded Serial Port Expansion, Test and Measurement Equipment, Point-of-Sale Terminal Interfaces, Security and Access-Control Equipment, Data Acquisition and Communication Modules.
Industrial RS-232 Control Interfaces
The MAX3232ECDG4 fits industrial control equipment that exchanges commands and status data over RS-232. Its two drivers and two receivers support bidirectional communication on a compact controller, while the 3 V to 5.5 V supply range allows use with 3.3 V or 5 V logic. The 250 kbps maximum data rate is adequate for command traffic, diagnostics, configuration uploads, and short data packets. According to the Texas Instruments datasheet, the bus pins include ±15 kV IEC ESD protection, which is valuable when the interface connects to an external cable. Keep the charge-pump network short and provide a defined ground relationship between the equipment and connected RS-232 equipment.
پیشنهادی
Embedded Serial Port Expansion
The MAX3232ECDG4 can add a compact RS-232 interface to an embedded controller or programmable logic design. Two transmit channels and two receive channels provide useful channel flexibility without requiring several discrete line-driver packages. The single 3 V to 5.5 V operating range simplifies interfacing with modern embedded logic while retaining compatibility with 5 V systems. Its 250 kbps rate supports moderate-speed command and diagnostic channels rather than high-volume storage transfer. Place the device near the connector or board edge, keep the driver outputs away from sensitive inputs, and follow the Texas Instruments datasheet for charge-pump capacitor values and routing.
پیشنهادی
Test and Measurement Equipment
The MAX3232ECDG4 is appropriate for test and measurement instruments that use RS-232 for legacy instrument control, service diagnostics, or fixture communication. The dual-driver and dual-receiver arrangement allows one port to exchange commands and receive responses, while the 250 kbps data rate is suitable for typical control protocols. Its 0 °C to 70 °C specification suits laboratory and indoor commercial equipment. The ±15 kV IEC bus-pin protection adds resilience to electrostatic discharge from attached test leads. Designers should still provide appropriate connector-side protection, maintain a controlled ground reference, and verify that the selected UART supports the required baud rate and electrical conditions.
پیشنهادی
Point-of-Sale Terminal Interfaces
The MAX3232ECDG4 can support RS-232 communication in point-of-sale terminals, printers, scanners, and related peripherals that retain legacy serial connectors. A 2/2 transceiver arrangement provides transmit and receive paths for device control and response handling, while operation from 3 V to 5.5 V supports both 3.3 V and 5 V terminal electronics. The 250 kbps rate is more than sufficient for ordinary transaction commands and status exchanges. For cables connected outside the enclosure, route the interface toward the connector and follow the Texas Instruments datasheet for ESD protection and charge-pump layout. Confirm the peripheral’s RS-232 logic levels and pin assignment before finalizing the system interface.
پیشنهادی
Security and Access-Control Equipment
The MAX3232ECDG4 is suitable for access-control readers, door controllers, alarm panels, and security equipment that use RS-232 for configuration or integration with another controller. The two transmitters can serve separate downstream links, while the two receivers can monitor responses or status lines. Its 3 V to 5.5 V supply range supports common control-board rails, and the specified ±15 kV IEC ESD protection improves robustness for externally cabled interfaces. Installation practice remains important: provide connector grounding and protection, isolate noisy motor or relay power from the communication path, and observe the manufacturer’s capacitor placement instructions to minimize switching transients.
پیشنهادی
Data Acquisition and Communication Modules
The MAX3232ECDG4 can provide a wired RS-232 connection for data-acquisition modules, remote sensors, and laboratory adapters. Two driver and receiver channels allow a module to communicate with more than one compatible endpoint when the system topology permits it. The 250 kbps rate supports typical sampled-control messages and configuration transfers, while the single 3 V to 5.5 V supply simplifies power planning. According to the Texas Instruments datasheet, the interface includes ±15 kV IEC ESD protection for bus pins. Use twisted-pair wiring where appropriate, maintain a common ground strategy for connected equipment, and route the cable-side interface away from switching regulators and high-current inductive loads.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MAX3232ECDG4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | MAX3232EIDR | MAX3232ECD |
|---|---|---|---|
| Package | 16-pin SOIC | 16-pin narrow SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Number of Drivers | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Data Rate | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV IEC ESD | ±15 kV IEC ESD | ±15 kV IEC ESD |
| Order Code Suffix | G4 | IDR | Base family designation |
تفاوتهای کلیدی
- Combines two complete RS-232 channels in one interface IC (در مقابلMAX3232ECD)
- Supports both modern and legacy logic supply levels (در مقابلMAX3232EIDR)
- Adds specified protection at externally accessible bus pins (در مقابلMAX3232ECD)
یادداشتهای طراحی
Place the charge-pump capacitors and their associated traces immediately beside the MAX3232ECDG4, following the Texas Instruments datasheet layout. Keep the switched-capacitor loop compact and route return current without sharing narrow paths with sensitive signal returns. Place the transceiver near the RS-232 connector so protected bus-pin traces remain short. Provide a solid ground plane and place connector-side protection ahead of the IC rather than relying only on the internal ESD structures.
RS-232 is a single-ended interface, so ground offsets and cable noise can affect receiver performance. Use a controlled ground strategy between connected equipment, route driver and receiver traces away from switching nodes, and keep the interface away from high-current relay or motor paths. Verify receiver inputs with the actual baud rate, cable length, and grounding arrangement. The 250 kbps capability is a device limit and does not guarantee the same performance in every cable or system environment.
Do not select MAX3232ECDG4 solely from the transceiver description. Confirm the 16-pin SOIC footprint, 3 V to 5.5 V supply, enable behavior, charge-pump capacitor values, 0 °C to 70 °C temperature range, and UART timing requirements against the manufacturer datasheet. Also confirm whether the required shipping form is tube or tape-and-reel. A base family name or a functionally similar RS-232 IC does not automatically satisfy the mechanical and ordering requirements.
The MAX3232ECDG4 contains charge-pump circuitry that can generate fast-edge current on the board. Follow the recommended capacitor placement and keep the device away from sensitive analog inputs where possible. Provide adequate ground-plane continuity beneath the IC and avoid routing RS-232 traces in parallel with power-converter high-current paths. If the surrounding system contains switching regulators, clocks, or relays, verify radiated and conducted emissions with the completed board rather than relying only on simulation.
اطلاعات انطباق
The product listing identifies RoHS compliance and lead-free status. The MAX3232ECDG4 is a commercial-temperature RS-232 interface rather than an automotive-qualified device; no AEC-Q100 qualification is stated.