MC1455DR2G - 4.5-16V Precision Timer Oscillator | onsemi
MPN: MC1455DR2G ✓ فعالMC1455DR2G نمای کلی
A monolithic timer is an analog timing IC that compares an externally generated voltage with a threshold voltage to control an internal switch. In a 555-family timer, the category hierarchy extends from timer IC to clock and timing IC to analog and mixed-signal semiconductor. The MC1455DR2G can operate as a one-shot monostable circuit, where an external resistor and capacitor set the output pulse width, or as a free-running astable oscillator, where two resistors and one capacitor establish frequency and duty cycle.
The MC1455DR2G offers adjustable duty cycle and direct replacement capability for standard NE555 timer circuits. Its trigger and reset inputs support external timing control, while the output stage produces a timing pulse suitable for driving indicator, control, or driver stages. Its 4.5 V to 16 V operating range covers conventional 5 V, 12 V, and 15 V industrial control environments when the timing network and load current are selected appropriately.
Internally, the device uses resistor-comparator reference elements, a discharge transistor, and a flip-flop to control the output stage. In astable operation, the timing capacitor charges and discharges between the device's internal trigger and threshold levels. In monostable operation, the trigger input initiates a fixed output pulse determined primarily by one timing resistor and one timing capacitor. These internal functions make the circuit useful wherever a simple, reliable, externally adjustable time base is required.
Typical applications include industrial control timers, LED and lamp flashers, pulse generators, debounce circuits, waveform converters, delay stages in test equipment, and audio or modulation tone generators. The trigger terminal also allows the timer to be synchronized by an external event, while the reset terminal provides direct interruption of an active timing cycle.
When laying out a timing circuit, place the timing resistor and capacitor close to their associated IC pins to reduce parasitic pickup and timing error. Confirm trigger and reset levels against the external driving circuit, and size the discharge path for the maximum timing-capacitor voltage. Decoupling close to the supply pins is essential when the load produces switching transients.
This page combines manufacturer timing characteristics, distributor package information, cross-reference candidates, and practical design guidance. It helps engineers identify pin-compatible options, evaluate the 8-SOIC footprint, and plan monostable or astable implementations without relying only on a distributor catalog listing.
جایگزینهای drop-in برای MC1455DR2G — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MC1455DR2G (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Operating Modes, Product Type, RoHS Status, Trigger Input.
MC1455BDR2G
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MC1455DG
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MC1455DR2
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←NE555DR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←NA555DR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MC1455DR2G مشخصات
| Product Type | 555 Type, Timer/Oscillator (Single) IC |
| Supply Voltage Range | 4.5 V to 16 V |
| Timing Range | Microseconds to hours |
| Operating Modes | Astable (free-running) and monostable (one-shot) |
| Duty Cycle | Adjustable |
| Logic Compatibility | TTL-compatible interface |
| Trigger Input | External trigger terminal provided |
| Reset Input | External reset terminal provided |
| بستهبندی | 8-pin SOIC, surface mount |
| نوع نصب | Surface mount |
| Device Type | Monolithic analog timer |
| Timing Control in Monostable Mode | 1 external resistor and 1 external capacitor |
| Timing Control in Astable Mode | 2 external resistors and 1 external capacitor |
| Number of Timers per Package | 1 timer |
| وضعیت RoHS | unknown |
پیکربندی پین MC1455DR2G
| پین 1 | GND — Ground reference |
| پین 2 | TRIGGER — Negative-going trigger input for monostable or astable timing |
| پین 3 | OUTPUT — Buffered timing output |
| پین 4 | RESET — Reset input; a low level inhibits the active timing cycle |
| پین 5 | CONTROL VOLTAGE — Internal control-node bypass or bias terminal |
| پین 6 | THRESHOLD — Threshold input used to detect timing capacitor voltage |
| پین 7 | DISCHARGE — Timing-capacitor discharge node |
| پین 8 | VCC — Positive supply input |
کاربردهای معمول
MC1455DR2G مناسب است برای 6 کاربردs: Industrial Control Delay, LED Flasher and Indicator Driver, Pulse and Tone Generator, Switch Debounce and Retrigger Control, Power-Sequencing and Event Delay, Test and Measurement Trigger Circuit.
Industrial Control Delay
The MC1455DR2G suits monostable delay stages in industrial control systems because one timing resistor and one capacitor determine the output pulse duration. Its 4.5 V to 16 V operating range supports 5 V, 12 V, and 15 V control rails, while the trigger terminal lets an external event initiate the interval. Connect the output to the required control stage within its rated drive capability, and use the reset terminal for an immediate shutdown path. For repeatable production timing, choose a tight-tolerance resistor and a low-temperature-coefficient capacitor, then confirm the delay against the manufacturer's timing equations.
پیشنهادی
LED Flasher and Indicator Driver
In an LED flasher, the MC1455DR2G operates as an astable oscillator with two timing resistors and one capacitor. The charge-discharge cycle produces a continuous square wave whose frequency and duty cycle determine the flashing rate. The 8-SOIC package keeps the assembly compact, and the adjustable duty cycle allows the LED to remain on for a shorter or longer portion of each cycle. Series-limit the LED, verify that the output current remains within the device rating, and bypass the supply pins close to the IC for clean transitions in low-noise control panels.
پیشنهادی
Pulse and Tone Generator
The MC1455DR2G can generate continuous pulses for clocking, modulation, and simple tone-generator circuits when configured in astable mode. Its trigger terminal permits the repetition rate to be synchronized by an external signal, adding flexibility beyond a free-running oscillator. Because the timing network is external, the engineer can select values for the required frequency and duty cycle without changing the IC. Keep the timing resistor and capacitor adjacent to the threshold and discharge circuitry, observe the control-node bypass requirement, and keep the output load within the electrical limits specified by onsemi.
پیشنهادی
Switch Debounce and Retrigger Control
The MC1455DR2G can be used to clean up a noisy switch transition or create a fixed output after a valid event. A one-shot configuration converts an accepted trigger edge into a defined output pulse, while the reset terminal provides a controlled path to inhibit unwanted timing cycles. This arrangement helps prevent a mechanical or contact-bounce event from repeatedly triggering downstream logic. Choose a pulse duration that exceeds the expected bounce interval, add conditioning around the trigger input, and validate the logic levels because an automotive-grade or TTL interface requirement may influence the external design.
پیشنهادی
Power-Sequencing and Event Delay
The MC1455DR2G can create a delayed enable or reset pulse in a power-sequencing arrangement. A supply or control event triggers the timer, and the resulting output pulse can inhibit another stage for a defined interval. The external trigger and reset terminals make the behavior easier to coordinate with other control logic than in a hardwired delay network. The 4.5 V minimum operating voltage makes it suitable for conventional logic rails, but the entire circuit must remain within 16 V. Confirm the output's sourcing and sinking capability before driving a control input, and use the reset path to guarantee a defined state during startup.
پیشنهادی
Test and Measurement Trigger Circuit
The MC1455DR2G is useful for building repeatable trigger, strobe, or delayed-event circuits in test equipment. In monostable mode, an external trigger initiates a fixed output interval that can drive a counter, sampling circuit, or display update. The 8-SOIC package simplifies board assembly and preserves the familiar 555 timer interface. Use the manufacturer's timing equations to establish nominal values, but calibrate the circuit when the required interval depends on timing accuracy. Place the timing network close to the device, bypass the control node, and account for probe loading when the output drives high-impedance instrumentation.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MC1455DR2G — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | MC1455BDR2G | MC1455DG | MC1455DR2 | NE555DR | NA555DR |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC - same footprint | 8-SOIC - same footprint | 8-SOIC - same footprint | 8-SOIC - same footprint | 8-SOIC - same footprint |
| Brand | onsemi | onsemi | onsemi | onsemi | Texas Instruments | Texas Instruments |
| Device Type | 555 Type, Timer/Oscillator (Single) IC | 555 Type, Timer/Oscillator (Single) IC | 555 Type, Timer/Oscillator (Single) IC | 555 Type, Timer/Oscillator (Single) IC | 555 Type, Timer/Oscillator (Single) IC | 555 Type, Timer/Oscillator (Single) IC |
| Supply Voltage Range | 4.5 V to 16 V | 4.5 V to 16 V | 4.5 V to 16 V | 4.5 V to 16 V | 4.5 V to 16 V | 4.5 V to 16 V |
| Timing Range | Microseconds to hours | Microseconds to hours | Microseconds to hours | Microseconds to hours | Microseconds to hours | Microseconds to hours |
| Operating Modes | Astable and monostable | Astable and monostable | Astable and monostable | Astable and monostable | Astable and monostable | Astable and monostable |
| Duty Cycle | Adjustable | Adjustable | Adjustable | Adjustable | Adjustable | Adjustable |
| Trigger and Reset Terminals | Provided | Provided | Provided | Provided | Provided | Provided |
| Number of Timers | 1 timer | 1 timer | 1 timer | 1 timer | 1 timer | 1 timer |
تفاوتهای کلیدی
- Adjustable duty cycle with a standard 555 timer interface (در مقابلNE555DR)
- Direct replacement positioning within the onsemi MC1455 family (در مقابلMC1455BDR2G)
- Single-package timer with external timing control (در مقابلNA555DR)
یادداشتهای طراحی
Place the timing resistor and capacitor close to the threshold, discharge, and supply pins to minimize parasitic pickup and timing error. Route the control-voltage bypass capacitor directly to the ground pin with a short trace, and place the supply bypass capacitor beside the device. For a monostable circuit, keep the trigger and reset traces away from the timing nodes so switching transients do not alter the delay.
Do not treat the trigger and reset pins as ordinary logic inputs without checking their voltage thresholds. A low reset level inhibits the timer, while the trigger terminal responds to a negative-going transition. Also observe the 16 V maximum supply rating. The output and discharge stages have finite current limits, so the load and timing capacitor must remain within the electrical limits defined by the onsemi datasheet.
Estimated: the timing node's discharge activity and the output load create dynamic current pulses even though the average timer supply current can be modest. Decouple the 8-SOIC device close to pins 1 and 8, especially when an LED, relay driver, or long timing network is present. If the load can generate significant transients, isolate the timing section from the noisy output path and verify supply voltage at the IC during switching.
اطلاعات انطباق
The manufacturer page and cross-reference material identify RoHS and REACH as comparison attributes, but no definitive compliance declaration was captured for this exact ordering code. Confirm compliance and automotive qualification on the current onsemi product documentation before procurement release.