NXP Semiconductors

MC33790DW - Dual-Channel DSI Interface IC | NXP

MPN: MC33790DW ✓ فعال
16-pin SOIC Package
حداقل سفارش: 1 |

MC33790DW نمای کلی

The NXP Semiconductors MC33790DW is a two-channel physical-layer interface IC for the Distributed System Interface, or DSI bus. It provides bidirectional communication between slave and master devices, uses two independent DSI bus outputs, and is packaged in a 16-pin SOIC. The device was designed to meet automotive requirements while remaining applicable to nonautomotive systems.

A DSI physical-layer interface is the electrical termination between a digital control system and devices connected through a DSI bus. It belongs to the interface IC hierarchy, where a physical-layer transceiver translates logic signals into robust bus-level waveforms and returns received bus activity to the controller. Two independent outputs allow the MC33790 to serve two separate DSI connections or channels within a larger distributed control architecture.

The MC33790 includes current limiting in its bus outputs as required by the DSI bus specification. This protection limits fault current when a bus line is shorted, overloaded, or otherwise driven outside normal conditions. The device also incorporates thermal shutdown to reduce the risk of damage during excessive power dissipation. Separate output channels provide operational flexibility when a system uses more than one DSI connection.

The MC33790DW is identified as a logic-input, logic-output interface IC. Its physical-layer role is more important than its simple digital classification suggests: the logic-compatible controls communicate with the DSI bus through internal driver and receiver functions. Bidirectional operation supports both command transmission and response reception, allowing a master to query a slave and receive status or measurement information without requiring a separate physical-layer device for each direction.

Typical applications include automotive distributed electronic control systems, body and chassis modules, comfort and convenience controllers, sensor interfaces, and industrial equipment using a DSI-compatible distributed architecture. In each case, the interface IC connects a microcontroller or logic controller to external DSI nodes while adding output current limiting and thermal protection. It can also be used in nonautomotive equipment when the system architecture and electrical requirements follow the DSI specification.

For PCB implementation, place the device close to the protected DSI bus connections and route the bus traces away from sensitive analog and high-speed digital signals. Confirm the datasheet's recommended external components and termination requirements before finalizing the layout. Because the operating voltage limits, electrical timing, and complete pin-assignment details are not stated in the product summaries, use the NXP manufacturer datasheet for those design-critical values.

This product page combines the device's DSI channel structure, protection functions, package information, sourcing workflow, and design guidance with practical interface considerations. It is intended to help engineers evaluate the MC33790DW faster while retaining the manufacturer datasheet as the controlling source for electrical limits and implementation details.

جایگزین‌های drop-in برای MC33790DW — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

MC33790DW/R2

✅ جایگزین مستقیم
📦 16-SOIC
Revision designation differs from the standard MC33790DW; no quantified electrical change is stated, and the documented key ratings are treated as identical.

📋 جایگزین مرجع (خارج از کاتالوگ)

MC33790DW مشخصات

Product Type Two-channel DSI physical-layer interface IC
DSI Channel Count 2 channels
Independent Bus Output Count 2 outputs
Communication Direction Bidirectional
Bus Type Distributed System Interface (DSI)
Interface Classification Logic input and logic output
Output Protection Current limiting
Thermal Protection Thermal shutdown
Automotive Suitability Designed for automotive requirements
Nonautomotive Use Supported
Package Type 16-pin SOIC
Total Pin Count 16 pins
نوع نصب Surface mount

راهنمای پیکربندی پین MC33790DW 16-pin soic

پیکربندی پین برای MC33790DW (پکیج 16-pin soic). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin soic برای MC33790DW

داده پین‌آوت تفصیلی موجود نیست برای MC33790DW.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MC33790DW مناسب است برای 6 کاربردs: Automotive Body Control Modules, Distributed Chassis and Powertrain Control, Vehicle Sensor Interface Nodes, Industrial Distributed Control, Accessory and Comfort Systems, Distributed Automation Gateways.

🚗

Automotive Body Control Modules

The MC33790DW is suitable for a body-control module that must distribute commands and collect responses over DSI-connected slave devices. Its two independent bus outputs allow one controller to manage two DSI channels, while bidirectional communication supports both command transmission and returned status. Current limiting adds protection at the bus outputs, and thermal shutdown helps guard the interface against damaging dissipation. According to the NXP manufacturer datasheet, the device was designed to meet automotive requirements. The controller-side implementation should still be checked against the datasheet's specified supply limits, timing, external components, and bus topology before a vehicle program is released.

🚗

Distributed Chassis and Powertrain Control

A distributed chassis or powertrain-control system can use the MC33790DW to connect a central controller with remote I/O nodes over DSI. Two independent outputs support separate bus branches, while the bidirectional physical layer allows each node to report status or sensor results back to the master. The output current limiting and thermal shutdown functions provide local fault containment at the interface boundary. The NXP manufacturer datasheet confirms automotive-oriented design and bidirectional communication. Engineers should verify signal timing, operating limits, and network topology against the manufacturer document, particularly where a remote node is connected through a long harness or shares a bus with other automotive electronics.

🧩

Vehicle Sensor Interface Nodes

The MC33790DW can form the bus-side interface of a remote vehicle sensor node that receives commands and returns measurements to a master controller. Bidirectional DSI communication removes the need for separate command and response transceivers, and the two-channel arrangement supports compact multiplexed node implementations. Current limiting helps limit fault current on a miswired or shorted bus output, while thermal shutdown provides an additional protection mechanism. The NXP manufacturer datasheet identifies the device as a two-channel physical-layer interface intended for distributed systems. Final sensor-node implementation should follow the datasheet's electrical limits, external-component guidance, and any bus-specific termination or grounding requirements.

🏭

Industrial Distributed Control

The MC33790DW can be used in nonautomotive industrial control equipment where a master controller communicates with distributed actuator, sensor, or communication modules over DSI. The two independent bus outputs simplify multi-node architectures, and bidirectional operation allows the controller to poll remote devices as well as issue commands. Current limiting and thermal shutdown add practical protection for factory equipment where cabling faults or sustained bus loading may occur. The NXP manufacturer datasheet explicitly permits nonautomotive use. Before deployment, confirm the industrial environment's temperature requirements, grounding strategy, bus length, and timing margins against the manufacturer's electrical characteristics and application guidance.

🚗

Accessory and Comfort Systems

Accessory, comfort, and convenience electronics can use the MC33790DW to connect a vehicle controller to DSI slave modules. One physical-layer device supports two bus outputs, allowing a compact module to serve two distributed functions without duplicating the interface circuitry. Bidirectional communication lets the master obtain acknowledgements or status information in addition to transmitting commands. The NXP manufacturer datasheet identifies the interface as suitable for automotive requirements and highlights current limiting and thermal shutdown. Integration should account for harness transients, grounding, and the device's specified operating limits; the datasheet remains the controlling document for component values and protection details.

🏭

Distributed Automation Gateways

A nonautomotive automation gateway can use the MC33790DW as a protected physical-layer endpoint for two DSI branches serving remote sensors or actuators. The master controller can send commands and receive responses over the same bidirectional interface, reducing the number of separate bus transceivers required. Output current limiting offers a first level of protection against abnormal bus loading, while thermal shutdown helps prevent continued operation during excessive dissipation. The NXP manufacturer datasheet confirms that MC33790 applications are not limited to automotive systems. For industrial deployment, validate timing, temperature, noise immunity, and network configuration against the manufacturer's specifications and the physical characteristics of the installed cable.

خلاصه محصولات پیشنهادی

MC33790DW NXP Semiconductors استفاده‌شده در: Automotive Body Control Modules, Distributed Chassis and Powertrain Control, Vehicle Sensor Interface Nodes, Industrial Distributed Control, Accessory and Comfort Systems, Distributed Automation Gateways MC33790DW/R2 Revision-designated DSI interface استفاده‌شده در: Automotive Body Control Modules, Distributed Chassis and Powertrain Control, Vehicle Sensor Interface Nodes, Industrial Distributed Control, Accessory and Comfort Systems, Distributed Automation Gateways
What is the MC33790DW?
The MC33790DW is a two-channel physical-layer interface IC for the Distributed System Interface, or DSI, bus. According to the NXP manufacturer datasheet, it supports bidirectional communication between slave and master ICs, provides two independent DSI bus outputs, and is housed in a 16-pin SOIC package.
How many DSI channels does the MC33790DW provide?
The MC33790DW provides two DSI channels and two independent bus outputs. This dual-channel arrangement allows a controller to interface with two distributed bus nodes or separate DSI connections. The NXP manufacturer datasheet identifies the device as a two-channel physical-layer interface for bidirectional master-to-slave and slave-to-master communication.
What protection functions are built into the MC33790DW?
The MC33790DW includes output current limiting and thermal shutdown. Current limiting helps contain excessive bus current when a line experiences a short or overload, while thermal shutdown is intended to protect the device from damage caused by excessive dissipation. These protections are specifically described in the NXP manufacturer datasheet.
Is the MC33790DW suitable for automotive applications?
Yes, the MC33790DW was designed to meet automotive requirements. The NXP manufacturer datasheet also states that the interface can be used in nonautomotive systems, giving designers flexibility to deploy it in industrial or other distributed-control products whenever the DSI electrical requirements are satisfied.
Where can I download the MC33790DW datasheet PDF?
The MC33790DW datasheet PDF is available directly from NXP at https://www.nxp.com/assets/documents/data/en/data-sheets/MC33790.pdf. Use the manufacturer document for the complete pin descriptions, electrical characteristics, application circuit, timing information, and recommended implementation details.
Where can I find the MC33790DW pinout?
The MC33790DW uses a 16-pin SOIC package, and its complete pin assignment is documented in the NXP manufacturer datasheet. Use the pin-description table and package drawing when assigning PCB tracks; do not infer unused or no-connect positions from the package outline alone.
What are the key specifications of MC33790DW that engineers should know?
The MC33790DW is a surface-mount, 16-pin SOIC interface IC with two DSI channels, two independent bus outputs, bidirectional communication, output current limiting, and thermal shutdown. The NXP manufacturer datasheet also confirms automotive-oriented design and suitability for nonautomotive applications when the DSI requirements are met.
What is the MC33790DW used for in an automotive control system?
The MC33790DW is used as the physical-layer connection between a logic controller and DSI bus nodes in a distributed automotive control system. Its two independent outputs support two bus connections, while current limiting and thermal shutdown add protection at the interface. The NXP manufacturer datasheet describes bidirectional slave and master communication.
Where can I buy MC33790DW online?
Use the Request a Quote form on this page to request MC33790DW availability, current lead time, minimum order quantity, and package-specific shipping options. This workflow keeps the inquiry connected to the exact NXP MC33790DW orderable designation and the required 16-pin SOIC configuration.
What is the price of the MC33790DW?
The current MC33790DW price should be requested through the Request a Quote form on this page. The structured pricing panel can be used to review the applicable commercial response for the exact 16-pin SOIC orderable part, including quantity requirements and current supply information.
What is the lead time for MC33790DW?
Request the current MC33790DW lead time through the Request a Quote form on this page. Lead time can depend on order quantity, packaging configuration, and current manufacturing availability, so an up-to-date production planning figure should be obtained before committing the component to a build schedule.
Is MC33790DW in stock?
Current MC33790DW inventory status should be confirmed through the Request a Quote form on this page. Submit the required quantity and packaging details to obtain the latest allocation and delivery information for the exact 16-pin SOIC device rather than relying on a family-level stock statement.
What is the difference between MC33790DW and MC33790DW/R2?
MC33790DW is the standard ordering designation, while MC33790DW/R2 identifies a revision designation associated with the same DSI physical-layer device. The available document titles do not identify a quantified electrical difference between the revisions. Confirm revision, ordering code, and lifecycle treatment with the NXP manufacturer datasheet or an NXP product representative.
What can replace the MC33790DW?
The documented same-device replacement candidate is MC33790DW/R2, which retains the 16-pin SOIC implementation and DSI physical-layer function. No cross-brand pin-compatible equivalent was identified with enough technical detail to prove drop-in suitability. The manufacturer datasheet and a PCB-level pin review should precede any substitution.
When should I choose the MC33790DW for a DSI interface?
Choose the MC33790DW when a design requires two DSI physical-layer channels, bidirectional master/slave communication, and protected bus outputs in a 16-pin SOIC package. It is particularly relevant to automotive distributed-control systems and can also serve nonautomotive equipment when the bus electrical requirements are met.

داده‌های مرجع مهندسی برای MC33790DW — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MC33790DW when a distributed-control design requires two DSI physical-layer channels, bidirectional communication, current limiting, and thermal shutdown in a 16-pin SOIC package. It is especially relevant to automotive modules and other systems in which a master controller communicates with remote DSI nodes. MC33790DW/R2 is the documented revision-designated alternative and is appropriate when that exact revision is approved for the product configuration, but its ordering and lifecycle details should be confirmed with NXP. No cross-brand drop-in equivalent could be proven from the available technical documentation, so the MC33790DW family is the defensible basis for a PCB-preserving replacement decision. Before releasing either device, verify the complete pin assignment, electrical limits, timing, external components, and DSI network configuration in the current manufacturer datasheet.

مقایسه با جایگزین‌ها

پارامتر این محصول MC33790DW/R2
Package 16-SOIC 16-SOIC
Brand NXP Semiconductors NXP Semiconductors
Product Type Two-channel DSI physical-layer interface IC Two-channel DSI physical-layer interface IC
DSI Channel Count 2 channels 2 channels
Independent Bus Outputs 2 outputs 2 outputs
Communication Bidirectional Bidirectional
Output Protection Current limiting Current limiting
Thermal Protection Thermal shutdown Thermal shutdown
Automotive Design Intent Designed to meet automotive requirements Designed to meet automotive requirements

تفاوت‌های کلیدی

  • Two independent DSI outputs in one 16-pin SOIC device (در مقابلMC33790DW/R2)
  • Bidirectional communication for master and slave roles (در مقابلMC33790DW/R2)
  • Integrated output fault protection (در مقابلMC33790DW/R2)

یادداشت‌های طراحی

Route each DSI bus output as a controlled interface trace and place the MC33790DW close to the connector or bus entry point. This minimizes the portion of the harness-side network exposed to board-level noise. Keep the device ground path short and provide a low-impedance ground reference, because the quality of the interface return path can affect communication reliability even when the bus itself is correctly routed.

Do not assume that a shared package is sufficient to approve a replacement. For MC33790DW/R2, confirm that the revision is approved for the production configuration and verify all 16 pin assignments against the NXP manufacturer datasheet. Also confirm supply limits, timing, external components, and bus configuration. This is especially important when an automotive program has documented EMC, fault-response, or change-control requirements.

Treat the MC33790DW's current limiting and thermal shutdown as fault-protection functions, not substitutes for correct bus design. Use the datasheet-specified external components and ensure that harness faults, short-circuit duration, and ambient temperature remain inside the device's supported operating conditions. Validate that normal bus loading does not force the interface into thermal shutdown during normal operation.

Separate the DSI bus traces from sensitive analog inputs and unrelated high-speed digital routes where practical. Maintain a continuous ground reference beneath the interface region and avoid long stubs from the bus nodes. Review the complete master, slave, cable, and termination arrangement against the DSI system requirements because the IC alone cannot compensate for an unsuitable bus topology.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The device was designed to meet automotive requirements, but the available product summaries do not state a specific AEC-Q100 qualification or other compliance declarations. Check the current NXP product page and material-declaration documents before making a compliance claim.

تاریخ تأیید داده‌ها: 2026-11-11 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MC33790DW datasheet MC33790DW pinout MC33790DW datasheet pdf MC33790DW equivalent MC33790DW replacement MC33790DW cross reference MC33790DW vs MC33790DW/R2 NXP MC33790DW MC33790DW 16-SOIC MC33790DW DSI interface MC33790DW automotive interface MC33790DW price

قطعات و اصطلاحات مرتبط

NXP Semiconductors MC33790DW MC33790DW/R2 Distributed System Interface DSI bus physical-layer interface IC interface IC logic input logic output bidirectional communication master IC slave IC current limiting thermal shutdown automotive electronics distributed control system 16-SOIC SOIC family surface mount SMD
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ