Microchip Technology

MCP662-E/MF - Dual 60MHz R-R Op Amp | Microchip

MPN: MCP662-E/MF ✓ فعال
2.5 V to 5.5 V Vdss 6 mA Id 8-DFN, 3 x 3 mm Package
حداقل سفارش: 1 |

MCP662-E/MF نمای کلی

The Microchip Technology MCP662-E/MF is a dual, general-purpose operational amplifier with a 60 MHz gain-bandwidth product, 32 V/µs slew rate, and rail-to-rail input and output operation in an 8-DFN 3 x 3 mm package. It operates from 2.5 V to 5.5 V and is specified for the extended automotive temperature grade.

An operational amplifier, commonly called an op amp, is an active semiconductor device that amplifies the difference between two input voltages. The MCP662 belongs to the operational-amplifier hierarchy within analog signal-chain and power-management ICs. Its dual-channel configuration provides two independent amplifiers in one package, reducing component count on signal-conditioning, filtering, and buffering boards.

The MCP662-E/MF combines 60 MHz gain bandwidth with a 32 V/µs slew rate. These characteristics suit applications requiring wider closed-loop bandwidth and faster edge rates than general-purpose low-frequency amplifiers. Rail-to-rail inputs allow operation across a substantial portion of the supply range, while rail-to-rail outputs improve dynamic range when the output approaches either supply rail. The device is specified for a 2.5 V to 5.5 V operating supply range.

The MCP662 family is optimized for high-speed signal processing and includes a high output short-circuit current capability. In voltage-feedback configurations, the amplifier can implement gain, level shifting, active filtering, differential-to-single-ended conversion, impedance matching, and signal conditioning. The dual arrangement is particularly useful for stereo paths, sensor interfaces, communications equipment, and instrumentation requiring matched channels.

Typical uses include audio and communication-signal conditioning, active filters, data-acquisition front ends, industrial controls, and low-voltage embedded systems. Its small 8-DFN package supports compact layouts, but exposed-pad thermal management and careful high-frequency layout remain essential. Designers should verify the exposed-pad connection, output loading, capacitor selection, and stability requirements against the manufacturer datasheet.

For a new design, begin with the required signal bandwidth and slew rate rather than using gain bandwidth as a stand-alone figure. Confirm that the selected gain, output amplitude, capacitive load, supply voltage, and temperature range satisfy the application. When upgrading an existing board, verify that the 8-DFN footprint, exposed pad, pin functions, and operating limits match before treating another device as a drop-in replacement.

This page organizes the MCP662-E/MF specifications, application guidance, package considerations, and verified drop-in alternatives into an engineering-focused reference. It also distinguishes confirmed same-footprint options from functional substitutes so replacement decisions remain based on pin compatibility and quantified parameter differences.

جایگزین‌های drop-in برای MCP662-E/MF — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

MCP662T-E/MF

✅ جایگزین مستقیم
📦 8-DFN (3 x 3 mm)
Same MCP662-family 60 MHz bandwidth and 8-DFN footprint; ordering-code-specific temperature and limit details require confirmation

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP652T-E/MF

✅ جایگزین مستقیم
📦 8-DFN (3 x 3 mm)
Gain bandwidth is 50 MHz versus 60 MHz, 16.7% lower, and minimum supply is 1.8 V versus 2.5 V

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP662-E/MF حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Gain Bandwidth Product 60 MHz
Slew Rate 32 V/µs
Supply Voltage Range 2.5 V to 5.5 V
Input Rail-to-Rail Rail-to-rail
Output Rail-to-Rail Rail-to-rail
جریان سکون 6 mA
بسته‌بندی 8-DFN, 3 x 3 mm
Total Pin Count 8 pins
Exposed Pad Present
Temperature Grade Extended automotive temperature grade
Automotive Qualification AEC-Q100
نوع نصب Surface mount
Output Short-Circuit Capability High output short-circuit current

راهنمای پیکربندی پین MCP662-E/MF 8-dfn, 3 x 3 mm

پیکربندی پین برای MCP662-E/MF (پکیج 8-dfn, 3 x 3 mm). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 8-dfn, 3 x 3 mm برای MCP662-E/MF

داده پین‌آوت تفصیلی موجود نیست برای MCP662-E/MF.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MCP662-E/MF مناسب است برای 6 کاربردs: Active Signal Filters, Sensor Signal Conditioning, Communications Buffering, Data Acquisition Front Ends, Audio Signal Conditioning, Industrial Control and Instrumentation.

🔧

Active Signal Filters

The MCP662-E/MF fits active filter stages that need more bandwidth than a conventional low-frequency op amp while preserving a compact dual-channel implementation. Its 60 MHz gain-bandwidth product and 32 V/µs slew rate provide the basis for wider-band low-pass, band-pass, and notch networks. Rail-to-rail inputs and outputs improve signal range in 2.5 V to 5.5 V systems, although the actual closed-loop response depends on resistor and capacitor tolerances, noise gain, and stability. Engineers should evaluate each filter topology with the required gain, full-scale input, output load, and datasheet typical-performance curves before finalizing component values.

🧩

Sensor Signal Conditioning

The MCP662-E/MF can condition low-voltage sensor signals where rail-to-rail operation, dual-channel flexibility, and fast transient response are useful. Its 60 MHz gain-bandwidth product supports closed-loop gain calculations that preserve sensor bandwidth, while the 32 V/µs slew rate reduces distortion on rapidly changing inputs. The 2.5 V to 5.5 V operating range suits compact battery-powered instrumentation. Designers should confirm input common-mode behavior, offset, noise, output drive, and stability for the selected gain, then place the feedback network close to the amplifier to minimize parasitic effects in sensor-front-end boards.

🌐

Communications Buffering

The MCP662-E/MF is appropriate for communications boards requiring two high-speed amplifier channels for impedance buffering, gain adjustment, or level translation. A 60 MHz gain-bandwidth product and 32 V/µs slew rate can process faster edge rates than low-bandwidth general-purpose amplifiers. Rail-to-rail inputs and outputs maximize usable signal range on low-voltage supplies, while the dual 8-DFN configuration reduces board area. The design must account for capacitive and inductive loading, output-current demand, channel matching where required, and the exposed-pad thermal connection. Transmission-line or impedance-control measures may also be necessary at higher data rates.

📺

Data Acquisition Front Ends

The MCP662-E/MF can serve as a dual input buffer or gain stage ahead of an ADC in compact data-acquisition systems. Its 60 MHz gain-bandwidth product leaves bandwidth for moderate-gain acquisition paths, and the 32 V/µs slew rate supports rapid settling between samples when the selected feedback network is appropriate. Rail-to-rail input and output behavior improves utilization of a 2.5 V to 5.5 V supply. Designers should verify settling time, offset, noise, common-mode range, ADC drive requirements, and output stability for the actual sampling rate. The exposed pad must also be connected according to the manufacturer package drawing.

🎧

Audio Signal Conditioning

The MCP662-E/MF can support audio preamplifier, crossover, and equalizer stages requiring faster response than a conventional low-frequency op amp. Its 60 MHz gain-bandwidth product and 32 V/µs slew rate provide additional margin for higher audio-bandwidth networks and low-amplitude signals requiring faithful edges. The dual amplifier arrangement is useful for left and right channels, while rail-to-rail output operation can improve signal swing on low-voltage supplies. Audio designers must still check output-current capability, distortion at the required frequency and amplitude, noise, channel matching, and stability into the next stage.

🏭

Industrial Control and Instrumentation

The MCP662-E/MF is suitable for compact industrial control and instrumentation modules where two channels, a 2.5 V to 5.5 V supply range, and fast signal response are valuable. It can condition control signals, buffer sensor outputs, or implement active compensation in low-voltage monitoring equipment. The extended automotive temperature grade and AEC-Q100 identification make the device relevant to harsh-environment designs, but system qualification remains necessary for the final environment. Engineers should review electrical limits, thermal performance, noise, output loading, and package details for the intended temperature range and production test plan.

خلاصه محصولات پیشنهادی

MCP662T-E/MF Same-family dual amplifier option for filter stages استفاده‌شده در: Active Signal Filters, Sensor Signal Conditioning, Communications Buffering, Data Acquisition Front Ends, Audio Signal Conditioning, Industrial Control and Instrumentation MCP652T-E/MF 8-DFN dual amplifier option for lower-bandwidth filters استفاده‌شده در: Active Signal Filters, Sensor Signal Conditioning, Communications Buffering, Data Acquisition Front Ends, Audio Signal Conditioning, Industrial Control and Instrumentation
What is the MCP662-E/MF?
The MCP662-E/MF is a dual, general-purpose operational amplifier with a 60 MHz gain-bandwidth product and 32 V/µs slew rate. According to the Microchip MCP662 product page and the manufacturer datasheet, it uses rail-to-rail inputs and outputs, operates from 2.5 V to 5.5 V, and is packaged in an 8-DFN 3 x 3 mm package with an exposed pad.
What are the key specifications of MCP662-E/MF that engineers should know?
The MCP662-E/MF combines two amplifier channels, a 60 MHz gain-bandwidth product, a 32 V/µs slew rate, rail-to-rail inputs and outputs, and a 2.5 V to 5.5 V supply range in an 8-DFN package. According to the Microchip MCP662 product page, the family also provides high output short-circuit current and includes automotive-grade ordering options for demanding signal-chain designs.
What is the operating voltage range of MCP662-E/MF?
The MCP662-E/MF operates from 2.5 V to 5.5 V. According to the Microchip manufacturer datasheet for the MCP662 family, this supply range supports low-voltage analog systems while retaining the 60 MHz gain-bandwidth product and 32 V/µs slew rate. Confirm the exact voltage at the amplifier pins during transient conditions and account for regulator tolerance in the system design.
Why choose the MCP662-E/MF for high-speed signal conditioning?
The MCP662-E/MF is appropriate for high-speed signal conditioning because its 60 MHz gain-bandwidth product and 32 V/µs slew rate provide greater bandwidth and faster output transitions than low-frequency general-purpose amplifiers. According to the Microchip MCP662 family documentation, the dual rail-to-rail configuration also supports compact dual-channel filtering, buffering, level shifting, and acquisition front-end layouts.
Where can I download the MCP662-E/MF datasheet PDF?
The official MCP662 product page provides the manufacturer documentation for the MCP662-E/MF. The product listing identifies the family as 60 MHz, 6 mA operational amplifiers, and the manufacturer datasheet contains the authoritative pin descriptions, electrical limits, typical characteristics, package drawings, and application guidance. Use the Microchip MCP662 product page rather than a secondary copy when validating design-critical information.
Where can I find the MCP662-E/MF pinout?
The MCP662-E/MF pinout is shown in the Microchip MCP662 manufacturer datasheet. The component uses an 8-DFN 3 x 3 mm package with an exposed pad, and its terminal arrangement must be matched to the exposed-pad land pattern when assigning PCB tracks. Use the pin-description table and package drawing in the manufacturer datasheet for the authoritative numbering and thermal-pad connection.
What is the best drop-in replacement for MCP662-E/MF?
The MCP662-E/MF has a directly related same-footprint option in MCP662T-E/MF, which appears in a verified manufacturer-family comparison and uses the same 8-DFN form. The MCP652T-E/MF is another 8-DFN candidate, but its 50 MHz bandwidth is 10 MHz lower than the 60 MHz target and its 1.8 V minimum supply differs from the 2.5 V target. Confirm enable, pin, and thermal details in the chosen device datasheet.
Can MCP652T-E/MF replace MCP662-E/MF?
MCP652T-E/MF can be considered only after a full electrical and pin-function review. The verified comparison identifies both devices as dual amplifiers in 8-pin DFN packages, but MCP652T-E/MF has 50 MHz bandwidth versus 60 MHz for MCP662-E/MF and operates down to 1.8 V rather than 2.5 V. Its 200 µV maximum offset specification also differs from the target family, so it is not an unconditional replacement.
MCP662-E/MF vs MCP662T-E/MF: which is better for an automotive design?
MCP662-E/MF is the better default starting point for a new design requiring the extended automotive temperature grade and AEC-Q100 qualification. MCP662T-E/MF appears as a closely related 8-DFN family member and may offer a direct same-footprint path, but its ordering-code-specific electrical requirements must be checked in the manufacturer datasheet. Both solutions share the 60 MHz-family architecture and 32 V/µs slew-rate positioning.
When should I choose MCP662-E/MF over MCP652T-E/MF?
Choose MCP662-E/MF when the signal path benefits directly from the higher 60 MHz gain-bandwidth product and 32 V/µs slew rate, particularly when operating from a 2.5 V minimum supply. MCP652T-E/MF is relevant when its 50 MHz bandwidth remains sufficient and its lower 1.8 V operating capability or stated 200 µV offset specification better matches the design. Verify output swing, noise, stability, and pin compatibility before replacement.
Is MCP662-E/MF suitable for active filters and data acquisition?
The MCP662-E/MF is suitable for many active-filter and data-acquisition stages because it combines 60 MHz gain bandwidth, 32 V/µs slew rate, dual channels, and rail-to-rail inputs and outputs. According to the Microchip MCP662 family documentation, the amplifiers target high-speed signal processing. Actual loop-gain stability, noise performance, settling behavior, and output-swing limits should be checked in the target filter topology.
What layout considerations matter for the 8-DFN MCP662-E/MF?
Place input, feedback, and decoupling connections close to the MCP662-E/MF and keep the exposed-pad thermal path unobstructed. The manufacturer datasheet should guide the 8-DFN land pattern and exposed-pad connection. For high-frequency operation, minimize parasitic capacitance at input and output nodes, maintain short feedback paths, and decouple the supply close to the device. Use the manufacturer layout guidance as the controlling reference.
How does the MCP662-E/MF handle thermal and power considerations?
The MCP662-E/MF is packaged in a compact 8-DFN with an exposed pad, so board copper and thermal design are central to reliable performance. The family is identified as a 6 mA operational-amplifier family, but actual channel dissipation depends on supply voltage, output swing, load, duty cycle, and ambient temperature. Use the datasheet power ratings and thermal information together with the final board layout to establish junction-temperature margin.
Where can I buy MCP662-E/MF online?
Use the Request a Quote form on this page to request current MCP662-E/MF supply, packaging, and lead-time information. The component is listed for the exact 8-DFN ordering configuration, but commercial terms and inventory can change independently of technical specifications. Provide the target quantity and required package form when submitting the request so procurement can confirm the exact MCP662-E/MF configuration.
What is the price and lead time of MCP662-E/MF?
Request the current MCP662-E/MF price, stock status, minimum order quantity, and lead time through the Request a Quote form on this page. Pricing for exact ordering codes depends on volume, package form, delivery date, and market conditions, while lead time also depends on factory availability. The form allows procurement to confirm the current commercial position for the required quantity and shipment destination.

داده‌های مرجع مهندسی برای MCP662-E/MF — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MCP662-E/MF for dual-channel signal paths that benefit from 60 MHz gain bandwidth, 32 V/µs slew rate, rail-to-rail operation, and a 2.5 V to 5.5 V supply range. It is particularly appropriate for compact active filters, sensor conditioning, communication buffering, acquisition interfaces, and instrumentation where the extended automotive temperature grade and AEC-Q100 identification are relevant. MCP662T-E/MF is the closest same-family candidate when its ordering-code-specific limits and temperature rating match the design. MCP652T-E/MF is a secondary option when its 50 MHz bandwidth is sufficient and operation below 2.5 V is useful; however, its lower bandwidth changes the required noise gain and settling margin. For every candidate, verify exposed-pad construction, pin functions, electrical limits, stability, and thermal performance against the manufacturer datasheet before treating it as a drop-in replacement.

مقایسه با جایگزین‌ها

پارامتر این محصول MCP662T-E/MF MCP652T-E/MF
Brand Microchip Technology Microchip Technology Microchip Technology
Package 8-DFN (3 x 3 mm) 8-DFN (3 x 3 mm) 8-DFN (3 x 3 mm)
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier
Gain Bandwidth Product 60 MHz 60 MHz 50 MHz
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V 1.8 V to 5.5 V
Input and Output Operation Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output

تفاوت‌های کلیدی

  • Higher gain bandwidth than the MCP652 alternative (در مقابلMCP652T-E/MF)
  • Faster specified slew rate in the same MCP662 family (در مقابلMCP662T-E/MF)
  • Higher minimum supply than the MCP652 alternative (در مقابلMCP652T-E/MF)

یادداشت‌های طراحی

Use the Microchip 8-DFN land pattern and exposed-pad connection exactly as defined by the manufacturer package drawing. Place the input, output, feedback, and supply-decoupling connections close to the associated pins, and provide a low-impedance ground plane. Because the package has no large leads, inspect the assembled board for solder voids beneath the exposed pad because those voids can sharply increase thermal resistance and reduce available power dissipation.

Keep feedback components and their associated amplifier pins close together to minimize parasitic capacitance and loop area. Route high-impedance input nodes away from the output, supply, and ground-current paths. If the MCP662-E/MF drives a capacitive or inductive load, verify stability and slew performance from the manufacturer data rather than assuming that the 32 V/µs rated slew rate will be maintained into every load.

Estimated thermal planning should use the final VIN, VOUT, load current, duty cycle, ambient temperature, exposed-pad copper area, and board thermal resistance rather than the device's 6 mA quiescent-current figure alone. Start with P = (VIN - VOUT) × IOUT for each channel, then apply the package and PCB thermal model from the manufacturer documentation. Add copper or thermal relief as needed while preserving the recommended exposed-pad layout.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The MCP662-E/MF is identified as an AEC-Q100 automotive-qualified, extended-temperature-grade part. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation in the current manufacturer product documentation or material declaration.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MCP662-E/MF datasheet MCP662-E/MF datasheet pdf MCP662-E/MF pinout MCP662-E/MF specifications MCP662-E/MF equivalent MCP662-E/MF replacement MCP662-E/MF cross reference MCP662-E/MF footprint MCP662-E/MF vs MCP652T-E/MF MCP662-E/MF price MCP662-E/MF stock Microchip MCP662-E/MF MCP662 dual 60MHz op amp MCP662 active filter application MCP662-E/MF lead time

قطعات و اصطلاحات مرتبط

Microchip Technology MCP662-E/MF MCP662T-E/MF MCP652T-E/MF operational amplifier op amp dual amplifier analog signal chain power-management IC gain-bandwidth product slew rate rail-to-rail input rail-to-rail output closed-loop bandwidth active filter signal conditioning data acquisition 8-DFN DFN package family surface-mount package exposed pad AEC-Q100 2.5 V to 5.5 V supply
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ