NXP Semiconductors

MKL02Z16VFM4 - 48MHz Cortex-M0+ 16KB Flash MCU | NXP

MPN: MKL02Z16VFM4 ✓ فعال
32-HVQFN (5 x 5 mm) Package 48 MHz Speed 16 KB (16K x 8) Memory
حداقل سفارش: 1 |

MKL02Z16VFM4 نمای کلی

The NXP Semiconductors MKL02Z16VFM4 is a 32-bit Kinetis KL02 microcontroller built around an Arm Cortex-M0+ core operating up to 48 MHz. It integrates 16 KB of flash memory and is supplied in a 32-pin 5 x 5 mm HVQFN package. The device belongs to the Kinetis L series, an entry-point portfolio for designers migrating from 8-bit systems while retaining a familiar microcontroller architecture.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one device. Within the broader hierarchy of embedded semiconductors, the MKL02Z16VFM4 is an MCU, then a 32-bit embedded processor, then an Arm Cortex-M0+ microcontroller. The Kinetis L series is positioned as an accessible, low-power platform for basic control, sensing, communications, and human-interface applications.

The principal device characteristics are a 48 MHz operating frequency, 16 KB of flash memory, and a 32-pin HVQFN package. NXP describes the KL0x family as the entry point to the Kinetis L series and as software- and tool-compatible with other Kinetis L series devices. That compatibility provides a practical migration path when a design needs more memory, peripheral capability, or processing performance while retaining the same development ecosystem.

The Cortex-M0+ architecture provides a compact instruction set, efficient event-driven execution, and broad suitability for embedded control. Its combination with integrated flash reduces the need for an external program-memory device in small systems. The 5 x 5 mm HVQFN package also supports compact PCB construction, although its exposed-pad and fine-pitch layout requirements make careful assembly and land-pattern design essential.

Typical uses include building-control nodes, simple sensor-hub boards, appliance controllers, compact access-control modules, industrial monitoring equipment, and low-cost consumer accessories. In these systems, the MCU can consolidate periodic sensing, digital I/O control, communications, and local human-interface handling while limiting board area and component count.

A primary design consideration is the package footprint. The 32-pin HVQFN has fine-pitch leads and a thermal or exposed pad that requires land-pattern and assembly-process compatibility. Firmware, startup code, clock configuration, and peripheral assignments should also be validated against the selected NXP development toolchain and the device's reference design before production release.

This product page combines the confirmed device identity, lifecycle status, package information, source links, engineering applications, and carefully qualified replacement considerations. It also identifies parameter gaps explicitly rather than inferring unconfirmed electrical, environmental, or lifecycle details, helping engineers make more reliable design and sourcing decisions.

جایگزین‌های drop-in برای MKL02Z16VFM4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MKL02Z16VFM4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Flash Memory, SRAM, ADC, Architecture.

Microchip Technology
SRAM: 2 KB
ADC: 12-bit, up to 350 ksps, up to 10 channels
مقایسه با MKL02Z16VFM4 →
NXP Semiconductors
Package: 16-QFN (3x3 mm) with exposed pad
SRAM: 2 KB
مقایسه با MKL02Z16VFM4 →
NXP Semiconductors
Package: 24-QFN (4 x 4 mm)
Flash Memory: 16 KB
مقایسه با MKL02Z16VFM4 →
NXP Semiconductors
Package: 16-QFN (3 x 3 mm)
Flash Memory: 32 KB
SRAM: 4 KB
مقایسه با MKL02Z16VFM4 →
NXP Semiconductors
Package: 32-HVQFN (5x5 mm) with exposed pad
SRAM: 4 KB
ADC: 12-bit SAR, 8 channels
مقایسه با MKL02Z16VFM4 →

MKL02Z16VFG4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
NXP Semiconductors
📦 32-HVQFN (5 x 5 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 16 KB (16K x 8) · 2 KB · 3.3 V · 16-QFN (3x3 mm) with exposed pad · Surface Mount

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MKL02Z32VFM4R

✅ جایگزین مستقیم
NXP Semiconductors
📦 32-HVQFN (5 x 5 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 32 KB (32K x 8) · 4 KB · 1.71 V to 3.6 V · -40C to +105C · 32-HVQFN (5x5 mm) with exposed pad

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MKL02Z32VFG4

✅ جایگزین مستقیم
NXP Semiconductors
📦 32-HVQFN (5 x 5 mm)
32-bit microcontroller · Arm Cortex-M0+ · Kinetis KL02 · 48 MHz · 32 KB · 4 KB · 3.3 V · Integrated USB

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MKL02Z64VFM4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 32-HVQFN (5 x 5 mm)
Flash increases from 16 KB to 64 KB, a 300% increase, while remaining within the KL02 package family.

📋 جایگزین مرجع (خارج از کاتالوگ)

MKL02Z64VFG4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 32-HVQFN (5 x 5 mm)
Flash increases from 16 KB to 64 KB, a 300% increase; the larger memory may affect firmware layout and validation.

📋 جایگزین مرجع (خارج از کاتالوگ)

MKL02Z16VFM4 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 32-bit microcontroller
Product Series Kinetis KL02
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB (16K x 8)
Architecture 32-bit
بسته‌بندی 32-HVQFN (5 x 5 mm)
تعداد پایه 32 pins
نوع نصب Surface mount
وضعیت چرخه عمر Active
Family Software Compatibility Software- and tool-compatible with Kinetis L series devices
Target Application Class Entry-level embedded control
Core Architecture Type Arm Cortex-M0+
Program Memory Type Embedded flash

راهنمای پیکربندی پین MKL02Z16VFM4 32-hvqfn (5 x 5 mm)

پیکربندی پین برای MKL02Z16VFM4 (پکیج 32-hvqfn (5 x 5 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 32-hvqfn (5 x 5 mm) برای MKL02Z16VFM4

داده پین‌آوت تفصیلی موجود نیست برای MKL02Z16VFM4.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MKL02Z16VFM4 مناسب است برای 6 کاربردs: Building Control Sensor Nodes, Industrial Monitoring and Alarm Modules, Access-Control and Keypad Readers, Smart Appliance Controllers, Portable Data Acquisition Modules, Communication and Protocol Bridges.

🏭

Building Control Sensor Nodes

The MKL02Z16VFM4 fits compact building-control nodes that gather readings from temperature, humidity, occupancy, or air-quality sensors and perform local threshold decisions. Its 48 MHz Arm Cortex-M0+ core provides ample control headroom for periodic sampling, digital filtering, and communication tasks, while the integrated 16 KB flash avoids an external program-memory device. The 32-HVQFN package also preserves board area in wall-control or ceiling-sensor housings. Before layout release, verify the exposed-pad thermal path, oscillator arrangement, and debug access against the NXP package guidance.

🏭

Industrial Monitoring and Alarm Modules

The MKL02Z16VFM4 is well suited to industrial monitoring modules that combine several digital inputs, local alarm logic, status indication, and periodic communication. The Cortex-M0+ core can execute a small state machine and filtering algorithms at up to 48 MHz, while the 16 KB flash provides space for a compact application, calibration constants, and diagnostic routines. Its small 5 x 5 mm HVQFN footprint helps minimize controller-board area. Engineers should confirm the exact peripheral assignments, clock configuration, reset behavior, and package land pattern for the production schematic.

🔒

Access-Control and Keypad Readers

The MKL02Z16VFM4 supports access-control readers that scan keypads, evaluate credentials, drive indicators, and maintain a short event log. A 48 MHz Cortex-M0+ core can debounce inputs, encode credentials, and update a display interface without requiring a higher-performance processor. The 16 KB embedded flash is appropriate for firmware that must boot quickly and operate without an external memory chip. The 32-HVQFN package assists compact reader designs, although electrical protection, keypad grounding, and power-fail behavior must be designed around the complete reader system rather than the MCU alone.

🔧

Smart Appliance Controllers

The MKL02Z16VFM4 can serve as the primary controller in a compact appliance module that coordinates switches, relays, motor signals, and a small user interface. The 48 MHz Cortex-M0+ processor provides deterministic control for state machines and debounce handling, and the integrated 16 KB flash simplifies firmware deployment in cost-sensitive products. Its 5 x 5 mm HVQFN body reduces PCB occupancy compared with larger leaded packages. Use the exact NXP pin description and recommended decoupling layout, and account for switching-node isolation from sensitive control signals.

📱

Portable Data Acquisition Modules

The MKL02Z16VFM4 fits portable data-acquisition modules that sample low-bandwidth sensors, preprocess readings, and transfer results through a serial interface. Its 48 MHz Cortex-M0+ core can handle timing, filtering, and packet assembly, while 16 KB flash is suitable for a compact acquisition application. The small package supports handheld or wearable-oriented instrument boards. Selection should include a review of the available ADC, timers, SRAM, and pin multiplexing once those device details are confirmed from the manufacturer datasheet, particularly if oversampling or buffering is required.

🌐

Communication and Protocol Bridges

The MKL02Z16VFM4 is appropriate for small protocol-conversion or communications-helper modules where one side of the board requires an independent embedded controller. The Cortex-M0+ core can manage framing, status reporting, timeout handling, and configuration updates at 48 MHz, while the 16 KB flash constrains the firmware to a focused bridge function. The compact 32-HVQFN package leaves board space for the physical interface and power circuitry. Validate UART, SPI, I2C, and interrupt assignments in the exact device pin table and ensure the bridge protocol does not require more memory than the device provides.

What is the MKL02Z16VFM4?
The MKL02Z16VFM4 is an active NXP Semiconductors 32-bit microcontroller based on the Arm Cortex-M0+ processor core. According to the NXP product information, it operates at up to 48 MHz, contains 16 KB of flash memory, and uses a 32-HVQFN package measuring 5 x 5 mm. It is part of the Kinetis KL02 series, an entry-point Kinetis L family intended for cost-conscious embedded designs and migration from 8-bit microcontrollers.
What are the key specifications of MKL02Z16VFM4?
The MKL02Z16VFM4 combines a 48 MHz Arm Cortex-M0+ core with 16 KB of embedded flash in a 32-pin 5 x 5 mm HVQFN package. NXP identifies the device as an active Kinetis KL02 microcontroller. The KL0x family provides a common software and tool path with the wider Kinetis L series, allowing designs to begin with a compact MCU and scale within the same ecosystem when greater memory or peripheral resources are required.
Where can I download the MKL02Z16VFM4 datasheet?
The official MKL02Z16VFM4 datasheet and product documentation are available through the NXP part page at https://www.nxp.com/part/MKL02Z16VFM4. The manufacturer page provides the authoritative data sheet, product status, environmental information, and product-change notices. Use that document for the complete pin description, electrical characteristics, memory map, flash configuration, package dimensions, and recommended operating conditions before finalizing a PCB or firmware design.
Where can I find the MKL02Z16VFM4 pinout?
The MKL02Z16VFM4 pinout is documented in the pin-description and package-drawing sections of the NXP manufacturer datasheet. The device is a 32-HVQFN, so its exposed pad and 32 fine-pitch terminals must be matched to the manufacturer land pattern. Do not infer pin assignments from a generic 32-pin QFN drawing; use the NXP package drawing and the device's signal-description table when assigning power, ground, reset, debug, clock, and GPIO functions.
What is the MKL02Z16VFM4 footprint?
The MKL02Z16VFM4 uses a 32-HVQFN footprint in a 5 x 5 mm package. Its compact body supports space-constrained control boards, but the terminal pitch and exposed pad require a qualified PCB footprint, solder-mask design, and assembly process. NXP's package drawing should be treated as the controlling reference. Verify the exposed-pad connection, paste pattern, reflow profile, and courtyard against the board fabrication and assembly capabilities before production.
Is MKL02Z16VFM4 suitable for low-power embedded control?
The MKL02Z16VFM4 is suitable for compact, low-power embedded-control designs because it combines an Arm Cortex-M0+ core with integrated 16 KB flash in the Kinetis L entry-level family. Actual low-current performance depends on the selected clock configuration, operating mode, peripherals, and firmware. Use the NXP electrical-characteristics and power-consumption sections to select sleep behavior, peripheral clocks, and regulator settings for the required battery-life target.
Where can I buy MKL02Z16VFM4 online?
The MKL02Z16VFM4 can be requested through the Request a Quote form on this page, where the exact MPN, quantity, and delivery requirements should be stated. The manufacturer lists the device as active, which supports continued lifecycle planning. Stock, lead time, and MOQ can vary by order quantity and date, so obtain a current quotation for the specific package, quantity, and shipping destination before committing the BOM.
What is the price of MKL02Z16VFM4?
Use the Request a Quote form on this page for the current MKL02Z16VFM4 price and quantity breaks. Pricing for this exact MPN changes with order volume, inventory, and purchasing terms, and a static figure can become outdated quickly. Include your required quantity, target date, ship-to region, and whether reel or another delivery format is required so the quotation reflects the actual procurement need.
What is the lead time for MKL02Z16VFM4?
The current lead time for MKL02Z16VFM4 should be confirmed through the Request a Quote form on this page by stating the required quantity and target delivery date. NXP identifies the MPN as active, but device availability can still vary with package choice, production allocation, and purchasing volume. For new designs, confirm the quote before schematic release and account for the normal production, inspection, and incoming-test lead times.
Is MKL02Z16VFM4 in stock?
Current inventory for MKL02Z16VFM4 should be requested through the Request a Quote form on this page. The NXP product page lists the exact device as active, while the quantity available at any given moment depends on distribution stock and manufacturing schedules. Submit the required quantity and shipment destination, and request a dated availability confirmation rather than relying on an undated stock indication.
What can replace the MKL02Z16VFM4?
A replacement should use the same 32-HVQFN footprint, preserve the Arm Cortex-M0+ execution model, and provide compatible power, clock, debug, and peripheral connections. Closest same-family choices may differ in flash capacity, which can change firmware fit and pin-level behavior. Before substitution, compare the complete NXP pin tables, memory sizes, clock limits, peripheral assignments, and package drawing; use a Request a Quote form when procurement support is needed.
MKL02Z16VFM4 vs MKL02Z32VFM4 - which is better?
The MKL02Z16VFM4 is preferable when 16 KB of flash is sufficient and the design values the smaller memory footprint; the MKL02Z32VFM4 provides 32 KB of flash for more firmware or data. Both are identified as 32-pin Kinetis KL02 devices in the same package family. Confirm the exact alternate pin table and exposed-pad requirements before treating either part as a drop-in replacement.
When should I choose MKL02Z16VFM4 instead of a larger Kinetis MCU?
Choose the MKL02Z16VFM4 when the application fits within 16 KB of flash, a 48 MHz Cortex-M0+ core, and the required KL02 peripheral set. It is a strong fit for compact controllers, basic sensor nodes, and simple access or appliance-control products. Select a larger family member when firmware growth, more GPIO, faster processing, richer connectivity, or additional memory would otherwise force workarounds or a later board redesign.
Is MKL02Z16VFM4 compatible with Kinetis L series tools and software?
Yes. NXP states that the KL0x ultra-low-power MCU family is software- and tool-compatible with other Kinetis L series devices. This makes the MKL02Z16VFM4 suitable for a controlled migration path within the Kinetis L ecosystem. Compatibility does not guarantee identical peripheral behavior or identical pin functions across every family member, so validate the startup configuration, driver support, memory map, and target-device settings for the exact MPN.
Does the MKL02Z16VFM4 meet RoHS and REACH requirements?
The compliance status must be checked in the environmental information and product-change documents published for MKL02Z16VFM4 by NXP. The device is listed as active, but lifecycle status alone does not establish RoHS, REACH, lead-free, or halogen-free status. Use the manufacturer's current product page and supporting declarations for the exact ordering code. Request current documentation through the appropriate compliance channel when a customer-specific material declaration is required.

داده‌های مرجع مهندسی برای MKL02Z16VFM4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MKL02Z16VFM4 for a compact Kinetis L design whose application fits within 16 KB of flash and does not require a more capable MCU. Its 48 MHz Arm Cortex-M0+ core is suitable for basic control, sensing, communications, and human-interface tasks, while the 5 x 5 mm 32-HVQFN package helps reduce board area. The KL0x family's compatibility with the broader Kinetis L software and tool environment also supports future scaling. Consider a 32 KB or 64 KB KL02 variant when firmware growth, diagnostic content, or application complexity makes 16 KB restrictive. Do not substitute on package appearance alone: verify the complete pin table, exposed pad, memory configuration, peripheral assignments, and ordering grade. For designs requiring significantly more GPIO, faster computation, richer connectivity, or larger memory, evaluate a higher-end Kinetis or competing MCU family instead of forcing an oversized device into the target footprint.

مقایسه با جایگزین‌ها

پارامتر این محصول MKL02Z16VFG4 MKL02Z32VFM4 MKL02Z32VFG4 MKL02Z64VFM4 MKL02Z64VFG4
Package 32-HVQFN (5 x 5 mm) 32-HVQFN (5 x 5 mm) 32-HVQFN (5 x 5 mm) 32-HVQFN (5 x 5 mm) 32-HVQFN (5 x 5 mm) 32-HVQFN (5 x 5 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Series Kinetis KL02 Kinetis KL02 Kinetis KL02 Kinetis KL02 Kinetis KL02 Kinetis KL02
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Flash Memory 16 KB 16 KB 32 KB 32 KB 64 KB 64 KB
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit

تفاوت‌های کلیدی

  • Lower flash option within the same KL02 package family (در مقابلMKL02Z32VFM4)
  • Compact 5 x 5 mm 32-HVQFN implementation (در مقابلMKL02Z64VFM4)
  • 48 MHz Cortex-M0+ control performance (در مقابلMKL02Z16VFG4)

یادداشت‌های طراحی

Base the PCB land pattern on the NXP 32-HVQFN package drawing rather than a generic 32-pin QFN footprint. Verify terminal-pitch dimensions, exposed-pad size, copper-defined and mask-defined pad options, solder-paste volume, and courtyard clearance. The 5 x 5 mm body saves area, but the exposed pad and thermal path should be connected according to the manufacturer layout guidance and coordinated with the board's copper stack-up.

Keep the MCU supply pins, decoupling network, and ground return geometry consistent with the NXP reference layout. Place the required capacitors at the associated device pins with short, low-inductance connections, and provide a continuous ground reference beneath the device where the package construction permits. Separate noisy switching or communication return paths from precision analog and sensor inputs to reduce susceptibility to ground bounce and conducted coupling.

Do not treat a same-package family member as an automatic drop-in part. Before changing the MPN, compare the complete pin-description tables, exposed-pad requirements, flash organization, clock limits, peripheral multiplexing, reset and debug functions, and ordering temperature grade. Firmware should also be rebuilt or revalidated for the alternate device because linker placement, startup assumptions, and device-specific configuration may change.

Determine the actual average and peak supply demand from enabled peripherals, bus activity, GPIO loading, and processor duty cycle rather than relying on a nominal CPU frequency alone. Check the alternate operating modes and peripheral clock gates in the manufacturer power-measurement conditions. For battery-powered products, use measured sleep and active-state currents at the intended temperature and supply voltage to choose the regulator, bulk capacitance, and battery capacity.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The verified product information confirms an active status but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations in the NXP environmental-information and product-change documents for the exact ordering code.

جستجوهای مرتبط

MKL02Z16VFM4 datasheet MKL02Z16VFM4 pinout MKL02Z16VFM4 datasheet pdf MKL02Z16VFM4 footprint MKL02Z16VFM4 price MKL02Z16VFM4 stock MKL02Z16VFM4 equivalent MKL02Z16VFM4 replacement MKL02Z16VFM4 vs MKL02Z32VFM4 NXP MKL02Z16VFM4 MKL02Z16VFM4 application circuit MKL02Z16VFM4 32-HVQFN

قطعات و اصطلاحات مرتبط

NXP Semiconductors MKL02Z16VFM4 MKL02Z16VFG4 MKL02Z32VFM4 MKL02Z32VFG4 MKL02Z64VFM4 MKL02Z64VFG4 Kinetis KL02 Kinetis L series Arm Cortex-M0+ 32-bit microcontroller embedded microcontroller 16 KB flash 48 MHz 32-HVQFN QFN family surface-mount package industrial control sensor node building control access control data acquisition embedded flash software compatibility
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ