Texas Instruments

MSP430F477IZCA - 8MHz Sensing MCU, 32KB Flash | Texas Instruments

MPN: MSP430F477IZCA ✓ فعال
113-pin NFBGA (ZCA) Package 8 MHz Speed 32 KB Memory
حداقل سفارش: 1 |

MSP430F477IZCA نمای کلی

Texas Instruments MSP430F477IZCA is an 8-MHz MSP430 sensing microcontroller with a 16-bit RISC CPU, 32KB of flash memory, 2KB of RAM, one 16-bit sigma-delta ADC, a 12-bit DAC, and a 128-segment LCD controller. The device is supplied in a 113-pin NFBGA (ZCA) package measuring 7 mm by 7 mm. Its mixed-signal and display resources support portable measurement systems that require analog conversion, low-power operation, and compact embedded control.

An MSP430 sensing microcontroller is an embedded mixed-signal controller that combines a low-power RISC processing core with peripherals designed for sensing, measurement, display, and communication functions. The MSP430 family uses a 16-bit architecture with 16-bit registers and five low-power modes designed to extend operating time in battery-powered portable measurement equipment. MSP430F477IZCA combines those power-management capabilities with dedicated ADC, DAC, and LCD resources rather than relying entirely on external discrete components.

The principal features include an 8-MHz operating frequency, 32KB flash organized as 32K by 8 bytes with an additional 256-byte information region, and 2KB of RAM. The analog subsystem includes one 16-bit sigma-delta ADC and a 12-bit DAC. A 128-segment LCD controller supports segmented-display products such as handheld meters, industrial panels, and portable instruments while reducing the need for external display-control hardware.

The 113-pin NFBGA package supports a dense mixed-signal design but requires careful PCB layout, BGA assembly capability, and controlled escape routing. Texas Instruments describes the NFBGA package as offering electrical performance equivalent to the conventional package and a board-layout and footprint equivalent to the referenced package. Package migration therefore still requires review of pin assignment, thermal behavior, solder-mask design, and assembly process requirements.

Typical applications include precision measurement instruments, low-power data loggers, handheld meters, sensor-interface systems, industrial monitoring panels, and connected laboratory equipment. The combination of local analog conversion, LCD control, flash-resident firmware, and RAM-based acquisition can simplify systems that would otherwise require separate data-conversion and display devices.

PCB implementation should preserve the exact pin assignments and recommended BGA land pattern from the manufacturer datasheet. Confirm pad geometry, solder-mask opening, assembly profile, and thermal conditions before release because the 113-pin NFBGA footprint is not interchangeable with a generic QFP or a BGA having a different ball count. Firmware development should use the MSP430 toolchain and configure the ADC, DAC, LCD, clocks, and low-power modes according to the device reference information.

This product record combines the manufacturer device description, package and memory details, conversion resources, and application-oriented design guidance to support component selection, PCB planning, firmware preparation, and sourcing decisions.

جایگزین‌های drop-in برای MSP430F477IZCA — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

MSP430F477IZCA حداکثر مقادیر مجاز و مشخصات الکتریکی

CPU Architecture 16-bit RISC
حداکثر فرکانس کلاک 8 MHz
Register Width 16 bit
Flash Memory 32 KB
Flash Organization 32K x 8 bytes plus 256 B
RAM Memory 2 KB
ADC Resolution 16 bit
ADC Type Sigma-delta
ADC Quantity 1
DAC Resolution 12 bit
LCD Segment Capacity 128 segments
Low-Power Modes 5 modes
بسته‌بندی 113-pin NFBGA (ZCA)
Package Dimensions 7 mm x 7 mm
نوع نصب Surface mount

راهنمای پیکربندی پین MSP430F477IZCA 7 mm x 7 mm

پیکربندی پین برای MSP430F477IZCA (پکیج 7 mm x 7 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 7 mm x 7 mm برای MSP430F477IZCA

داده پین‌آوت تفصیلی موجود نیست برای MSP430F477IZCA.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MSP430F477IZCA مناسب است برای 6 کاربردs: Precision Measurement Instruments, Industrial Panel Meters, Portable Data Loggers, Sensor Interface Systems, Handheld Environmental Monitors, Laboratory and Test Equipment.

🔧

Precision Measurement Instruments

The MSP430F477IZCA fits precision handheld instruments because it combines a 16-bit sigma-delta ADC with an 8-MHz 16-bit RISC CPU, 32KB flash, and 2KB RAM in one device. The ADC can acquire sensor signals while firmware performs filtering, calibration, and conversion to engineering units. Its 12-bit DAC also permits stimulus generation or test-signal output. Local conversion reduces system complexity compared with a microcontroller paired with separate analog converters, while the 113-pin 7 mm by 7 mm NFBGA supports compact handheld construction.

📺

Industrial Panel Meters

The 128-segment LCD controller makes the MSP430F477IZCA suitable for industrial panel meters requiring a dedicated segmented display. The processor can supervise readings from the integrated 16-bit sigma-delta ADC, apply calibration and alarm thresholds, and update the display without a separate LCD controller. A 12-bit DAC can support excitation or analog output where required. The compact 7 mm by 7 mm NFBGA helps reduce panel-board area, provided the PCB assembler can handle 113 BGA balls and the required escape-routing density.

📱

Portable Data Loggers

The MSP430F477IZCA is appropriate for portable data loggers because its MSP430 architecture includes five low-power modes for battery-conscious designs. Its 32KB flash stores firmware and data, while 2KB of RAM supports acquisition buffers and working variables. The integrated 16-bit sigma-delta ADC reduces the number of external signal-chain devices, and the 12-bit DAC can provide an analog reference or calibration output. Firmware can schedule measurements between low-power states to balance sampling responsiveness against energy consumption.

🧩

Sensor Interface Systems

The MSP430F477IZCA can act as the central controller in a compact sensor-interface module requiring local conversion and embedded processing. Its 16-bit sigma-delta ADC is suited to low-bandwidth measurement channels, and the 8-MHz 16-bit RISC core can manage acquisition timing and signal processing. The 12-bit DAC supports output signals, and 32KB of flash accommodates application firmware. Its low-power-mode architecture is particularly useful in distributed measurement systems where minimizing idle energy improves service intervals and battery life.

📱

Handheld Environmental Monitors

Environmental monitors benefit from the MSP430F477IZCA's combination of mixed-signal conversion, local memory, and low-power operation. A 16-bit sigma-delta ADC can acquire readings from suitable sensor signals, while firmware handles scaling, trend analysis, threshold alarms, and display updates. The 128-segment LCD controller supports compact readout designs, and the 12-bit DAC may generate a calibration or control voltage. The 113-pin NFBGA requires careful ball-escape routing, but its 7 mm by 7 mm dimensions help maintain a small instrument footprint.

🔧

Laboratory and Test Equipment

The MSP430F477IZCA is suitable for laboratory instruments that need deterministic embedded control, local analog conversion, and a segmented display. The 8-MHz 16-bit RISC CPU can execute measurement sequencing and control logic, while 32KB flash and 2KB RAM support embedded software. The 16-bit sigma-delta ADC handles suitable precision-oriented inputs and the 12-bit DAC can create test excitations. Its mixed-signal integration simplifies the bill of materials, although firmware and layout validation must account for analog grounding, BGA assembly, and low-power sequencing.

What is the MSP430F477IZCA?
The MSP430F477IZCA is an 8-MHz mixed-signal sensing microcontroller from Texas Instruments with a 16-bit RISC CPU, 32KB of flash, 2KB of RAM, one 16-bit sigma-delta ADC, a 12-bit DAC, and a 128-segment LCD controller. It is packaged in a 113-pin NFBGA (ZCA) measuring 7 mm by 7 mm. According to the Texas Instruments MSP430F477 product information, the device combines embedded processing, analog conversion, display control, and low-power operation for portable measurement systems.
What are the key specifications of MSP430F477IZCA that engineers should know?
The MSP430F477IZCA combines an 8-MHz 16-bit RISC core, 32KB flash, 2KB RAM, one 16-bit sigma-delta ADC, one 12-bit DAC, a 128-segment LCD controller, and five low-power modes. Texas Instruments identifies the exact device as an 8-MHz sensing MCU in a 113-pin NFBGA (ZCA) package. These resources make the device relevant to portable instruments that combine sensor acquisition, local data conversion, and segmented-display output.
Where can I download the MSP430F477IZCA datasheet PDF?
The MSP430F477IZCA datasheet and supporting documentation are available through the Texas Instruments MSP430F477 product page at https://www.ti.com/product/MSP430F477. The manufacturer page provides the authoritative device description, ordering information, datasheet access, and related technical resources. Use the pin-description and package drawings in that documentation before assigning the 113 NFBGA balls or approving a PCB land pattern.
Where can I find the MSP430F477IZCA pinout?
Use the MSP430F477IZCA pin-description table in the Texas Instruments MSP430F477 datasheet to identify all 113 NFBGA (ZCA) balls. The manufacturer product page is the appropriate starting point for the datasheet PDF and package information. Because the package contains 113 balls, do not infer assignments from a similarly named device in a different package, and verify every ball location against the ZCA drawing before PCB release.
Is MSP430F477IZCA suitable for low-power measurement devices?
Yes, the MSP430F477IZCA is suitable for low-power measurement devices because its MSP430 architecture includes five low-power modes and is optimized for portable measurement applications. It also combines a 16-bit sigma-delta ADC, 12-bit DAC, 32KB flash, and 2KB RAM on one device. Texas Instruments describes the architecture as combining a 16-bit RISC CPU, 16-bit registers, and low-power modes for extended battery life.
What peripherals are integrated into MSP430F477IZCA?
The MSP430F477IZCA integrates one 16-bit sigma-delta ADC, a 12-bit DAC, and a 128-segment LCD controller around an 8-MHz 16-bit RISC CPU. According to the Texas Instruments MSP430F477 product page, the device also provides 32KB of flash and 2KB of RAM. This integration can reduce the number of external conversion and display components in a compact measurement product.
What is the difference between MSP430F477IZCA and MSP430FG477IZQWR?
The MSP430F477IZCA is specified in a 113-pin NFBGA (ZCA) package, while MSP430FG477IZQWR is identified in cross-reference results under a QWR package designation. Their package identifiers and resulting PCB land patterns are different, so MSP430FG477IZQWR cannot be treated as a same-footprint drop-in replacement without a board-level redesign. Consult the manufacturer datasheets for the complete pin and electrical comparison.
When should I choose MSP430F477IZCA over another MSP430 sensing MCU?
Choose MSP430F477IZCA when a design specifically requires the combination of an 8-MHz MSP430 CPU, 32KB flash, 2KB RAM, a 16-bit sigma-delta ADC, a 12-bit DAC, and a 128-segment LCD controller in a 113-pin NFBGA. Its dense package favors compact products but requires BGA assembly and careful layout. Select another family member when its package, converter architecture, memory capacity, or display resources better match the product platform.
Can MSP430F477IZCA be used in an industrial panel meter?
The MSP430F477IZCA is a logical fit for an industrial panel meter that needs local sensor conversion and a segmented display. Its 16-bit sigma-delta ADC supports measurement channels, the 12-bit DAC can provide an analog output, and the integrated 128-segment LCD controller reduces external display-driver demand. The 7 mm by 7 mm NFBGA also helps where board area is constrained, although production assembly must support the 113-ball footprint.
What is the best drop-in replacement for MSP430F477IZCA?
No drop-in replacement is established by the available cross-reference information for MSP430F477IZCA. A valid drop-in alternative must use the same 113-pin NFBGA (ZCA) land pattern, preserve pin-to-pin signal compatibility, and remain within the specified electrical and memory limits. MSP430FG477IZQWR appears in a cross-reference result but uses a different package code, so it is not a footprint-compatible substitute without PCB changes.
What can replace MSP430F477IZCA?
MSP430F477IZCA can be replaced only after a candidate passes package, pinout, memory, clock, and peripheral compatibility checks. No same-package drop-in replacement is identified in the available cross-reference records. The MSP430FG477IZQWR is a related search result, but its QWR package designation indicates that it is not a direct 113-pin NFBGA replacement. Treat it as a redesign candidate unless the manufacturer confirms equivalent board compatibility.
Is MSP430F477IZCA in stock?
Use the Request a Quote form on this page to request current MSP430F477IZCA stock, lead time, and minimum order quantity. The manufacturer part-details page identifies the device as an orderable configuration, but stock quantity can change independently of the component lifecycle. Requesting a quotation against the exact MPN also helps confirm the 113-pin NFBGA (ZCA) package code.
What is the price of MSP430F477IZCA?
Use the Request a Quote form on this page for current MSP430F477IZCA pricing and available quantity breaks. The part is specified with a 113-pin NFBGA (ZCA) package, and quotation requests should include that exact package code to avoid mismatched BGA variants. Current commercial terms should be confirmed at the time of the request because component pricing and availability may change.
What is the lead time for MSP430F477IZCA?
Request the current MSP430F477IZCA lead time through the Request a Quote form on this page. Include the exact 8-MHz, 32KB-flash, 2KB-RAM device and 113-pin NFBGA (ZCA) package in the request. The manufacturer part-details page is the correct reference for the device identity, while current manufacturing and inventory status should be confirmed through a quotation.
Where to buy MSP430F477IZCA online?
Submit an MSP430F477IZCA request through the Request a Quote form on this page. State the exact MPN, 113-pin NFBGA (ZCA) package, required quantity, and target delivery location. The Texas Instruments part-details page is also suitable for confirming the official ordering designation. A quotation response provides the current commercial terms for that exact configuration.

داده‌های مرجع مهندسی برای MSP430F477IZCA — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MSP430F477IZCA when the design requires the exact combination of an 8-MHz MSP430 core, 32KB flash, 2KB RAM, one 16-bit sigma-delta ADC, a 12-bit DAC, a 128-segment LCD controller, and the 113-pin NFBGA (ZCA) footprint. It is especially appropriate for compact handheld meters, portable loggers, and industrial panel instruments where local conversion and low-power operation are valuable. The dense BGA package reduces board area but requires qualified assembly and careful layout. No same-package drop-in alternative is established for this exact orderable configuration, so a replacement should be treated as a redesign unless the manufacturer confirms pin-to-pin, footprint, electrical, and firmware compatibility.

یادداشت‌های طراحی

Base the 113-ball NFBGA land pattern exclusively on the Texas Instruments ZCA package drawing and pin-description table. Preserve the prescribed pad and solder-mask geometry, provide the required via-in-pad or escape-routing strategy, and confirm the PCB assembler supports the package pitch and board profile. Do not substitute a generic 113-pin BGA library because ball assignments, pad dimensions, and thermal construction are package-specific.

Plan analog signal routing around the 16-bit sigma-delta ADC and 12-bit DAC functions with a quiet return path to the device ground structure. Keep the sensor input and DAC output away from fast digital nets, clocks, and LCD drive signals. Use the reference schematic and layout guidance in the manufacturer documentation when assigning decoupling, analog filtering, and exposed-ball connections.

Avoid treating the MSP430FG477IZQWR search result as a footprint-compatible substitute for the MSP430F477IZCA. The QWR and ZCA package codes indicate different package constructions. Before any replacement is approved, verify all 113 electrical assignments, power requirements, analog performance, memory organization, clocking, and programming support against the manufacturer datasheets.

Use the low-power modes only after validating wake-up timing, ADC settling, and retained state for the selected acquisition cycle. Place required bypass capacitors close to their associated supply and ground balls using the manufacturer reference layout. An 8-MHz operating rate does not imply that the CPU should remain active continuously; firmware scheduling can use the five available low-power modes to reduce consumption between measurements.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated in the available device information.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MSP430F477IZCA datasheet MSP430F477IZCA datasheet pdf MSP430F477IZCA pinout MSP430F477IZCA equivalent MSP430F477IZCA replacement MSP430F477IZCA price MSP430F477IZCA stock Texas Instruments MSP430F477IZCA MSP430F477IZCA 113 pin NFBGA MSP430F477IZCA 16 bit sigma delta ADC MSP430F477IZCA 12 bit DAC MSP430F477IZCA 128 segment LCD MSP430F477IZCA vs MSP430FG477IZQWR MSP430F477IZCA application circuit

قطعات و اصطلاحات مرتبط

Texas Instruments MSP430F477IZCA MSP430F477 MSP430FG477IZQWR MSP430 sensing microcontroller mixed-signal microcontroller 16-bit RISC CPU 16-bit sigma-delta ADC 12-bit DAC 128-segment LCD controller 32KB flash memory 2KB RAM 8 MHz clock five low-power modes 113-pin NFBGA ZCA package 7 mm by 7 mm package portable measurement industrial panel meter portable data logger sensor interface BGA assembly embedded control
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ