Texas Instruments

MSP430FW427IPM - 16-Bit 8MHz Metering MCU, 64-LQFP | TI

MPN: MSP430FW427IPM ✓ فعال
2.5 V / 3.3 V Vdss 64-pin LQFP (10 x 10 mm) Package 8 MHz Speed 32 KB (32K x 8 plus 256 B) Memory
حداقل سفارش: 1 |

MSP430FW427IPM نمای کلی

The Texas Instruments MSP430FW427IPM is a 16-bit mixed-signal microcontroller for rotary sensing and metering systems, operating at 8 MHz with 32 KB of Flash memory and 1 KB of SRAM in a 64-pin LQFP package. It integrates three 16-bit sigma-delta ADCs, a 128-segment LCD controller, and a scan interface for gas, water, and electrical metering instruments.

A mixed-signal microcontroller combines a digital processor with analog conversion and display resources on one device. The MSP430 CPU16 architecture uses 16-bit registers and constant generators to support compact, energy-efficient code. In the MSP430FW427, these resources are optimized for low-power sensing rather than high-speed general-purpose control, allowing a meter to measure, process, and display information while minimizing energy consumption.

Key features include 32 KB of Flash organized as 32K x 8 plus 256 bytes, 1 KB of SRAM, three 16-bit sigma-delta ADC channels, and a 128-segment LCD. The device supports operation from 2.5 V and 3.3 V supply arrangements, making it suitable for battery-operated and mains-referenced metering products. The industrial-grade ordering option supports design work intended for extended industrial environments.

The sigma-delta ADC architecture is central to this sensing platform. Its three converters can acquire low-frequency analog signals associated with sensor elements, while the scan interface helps the device interrogate external sensor or switching networks systematically. This combination reduces the need for discrete analog front ends and keeps measurement, control, and display functions within one compact 64-LQFP device.

Typical uses include mechanical water meters, rotary flow meters, gas meters, electricity meters, and compact industrial sensing instruments. The LCD controller supports direct segment driving for compact meter displays, while the scan interface accommodates multiplexed sensor arrangements where a rotating or resistive sensing element must be interrogated.

When laying out a meter board, keep analog sensor connections short and place their protection or filtering components close to the associated input pins. Confirm the required external crystal, capacitor, LCD, and sensor-network values against the device documentation, and observe the specified operating voltage for the exact ordering option used in production.

This page consolidates device specifications, ordering-package details, same-package alternatives, comparison data, and practical design guidance to support component selection and PCB planning for next-generation rotary sensing instruments.

جایگزین‌های drop-in برای MSP430FW427IPM — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MSP430FW427IPM (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Core Architecture, Flash Memory, Power-Saving Modes.

Texas Instruments
Package: 64-pin LQFP (PM, 10x10 mm)
Core Architecture: MSP430 CPU16 (RISC, 16-bit)
Power-Saving Modes: 5
مقایسه با MSP430FW427IPM →
Texas Instruments
Package: 64-LQFP (10x10 mm)
Flash Memory: 32KB (32K x 8 + 256B)
Power-Saving Modes: Five
مقایسه با MSP430FW427IPM →

MSP430FW427IPMR

✅ جایگزین مستقیم
📦 64-LQFP (10x10)
Same MSP430FW427 device and 64-LQFP footprint; IPMR is the tape-and-reel ordering form versus the tray form, with 0% change in the principal electrical ratings.

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430FW425IPMR

✅ جایگزین مستقیم
📦 64-LQFP (10x10)
Same MSP430 FW family and 64-LQFP footprint, but a different FW425 configuration; peripheral resources must be checked because the exact ADC and scan feature count is not stated in the cross-reference listing.

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430F427IPM

✅ جایگزین مستقیم
Texas Instruments
📦 64-LQFP (10x10)
16-bit mixed-signal microcontroller · 8 MHz · 16-bit RISC MSP430 CPU · 32KB (32K x 8 + 256B) · 1KB · Sigma-Delta ADC · 3 · 16-bit

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MSP430F427IPMR

✅ جایگزین مستقیم
📦 64-LQFP (10x10)
Same 64-pin LQFP F427 device as MSP430F427IPM in the tape-and-reel ordering form; principal device ratings match while the packing method differs.

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430FW425IPM

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 64-LQFP (10x10)
Same-brand FW425 tray-ordering counterpart in the 64-LQFP family; the FW425-specific ADC and scan configuration can differ from the FW427 target and requires verification.

📋 جایگزین مرجع (خارج از کاتالوگ)

MSP430FW427IPM حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 16-bit mixed-signal microcontroller
CPU Core MSP430 CPU16 RISC
حداکثر فرکانس کلاک 8 MHz
Flash Memory 32 KB (32K x 8 plus 256 B)
SRAM 1 KB
ADC Configuration 3 x 16-bit sigma-delta ADCs
LCD Segments 128 segments
Scan Interface Yes
ولتاژ تغذیه 2.5 V / 3.3 V
بسته‌بندی 64-pin LQFP (10 x 10 mm)
نوع نصب Surface mount
Temperature Grade Industrial
Core Architecture 16-bit RISC with 16-bit registers and constant generators
Application Rotary sensing, gas metering, and water metering
Architecture Mixed-signal microcontroller

راهنمای پیکربندی پین MSP430FW427IPM 64-pin lqfp (10 x 10 mm)

پیکربندی پین برای MSP430FW427IPM (پکیج 64-pin lqfp (10 x 10 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 64-pin lqfp (10 x 10 mm) برای MSP430FW427IPM

داده پین‌آوت تفصیلی موجود نیست برای MSP430FW427IPM.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MSP430FW427IPM مناسب است برای 6 کاربردs: Rotary Water Meter, Gas Metering Instrument, Mechanical Flow Meter, Compact Industrial Sensing Panel, Battery-Powered Metering Node, Electricity Metering Controller.

🏭

Rotary Water Meter

The MSP430FW427IPM suits mechanical water meters in which a rotary sensor reports flow through a contact or sensing arrangement. Its 8 MHz CPU16 core provides adequate control bandwidth, while three 16-bit sigma-delta ADCs can acquire the available analog sensor signals at metering rates. The scan interface helps interrogate the sensor network, and the 128-segment LCD controller drives the local volume or status display. Its 32 KB Flash stores operating firmware and calibration constants, while 1 KB of SRAM supports short-term measurement and accumulation data. Validate the sensor interface, display glass, and low-current supply design against the manufacturer application guidance before production release.

🏭

Gas Metering Instrument

The MSP430FW427IPM targets gas meters that combine rotary or low-frequency sensing with local status information. The three 16-bit sigma-delta ADCs support digitizing sensor and diagnostic channels, while the scan interface helps sequence measurements from the metering network. The 128-segment LCD controller permits a compact display without adding a separate driver IC. At 8 MHz, the MSP430 CPU16 core can execute measurement processing, diagnostics, and display updates while retaining a low-power operating profile. Confirm calibration strategy, sensor excitation requirements, and compliance obligations for the finished gas meter separately from the MCU component qualification.

⚡

Mechanical Flow Meter

A rotary flow meter can use the MSP430FW427IPM to acquire sensor pulses, convert analog monitor channels, and present accumulated flow on an integrated LCD. The 16-bit CPU16 architecture supports efficient fixed-point processing for volume accumulation and time-based compensation, and the scan interface is useful when multiple sensor or switch inputs must be examined in sequence. The 32 KB Flash provides space for firmware and calibration tables, and the 1 KB SRAM supports working variables and display buffers. Because flow accuracy depends on the mechanical encoder, sensor characteristics, and clock accuracy, evaluate the complete signal chain rather than relying on MCU specifications alone.

🧩

Compact Industrial Sensing Panel

The MSP430FW427IPM is appropriate for compact industrial panels that combine low-frequency analog measurement with a segmented display. Its three sigma-delta ADCs reduce the need for external converters in slowly varying measurement channels, and the 128-segment LCD controller supports status, count, and diagnostic annunciators. The scan interface can simplify access to multiplexed resistive or switched sensor networks. The industrial temperature-grade ordering option makes the MCU suitable for industrial equipment designs, provided the complete assembly also satisfies its own environmental requirements. Keep analog traces short, provide appropriate input protection, and isolate noisy switching or relay circuits from the measurement front end.

🔋

Battery-Powered Metering Node

The MSP430FW427IPM can serve as the central controller in a battery-powered metering node because it combines low-frequency analog conversion, display control, and processing in one device. Reducing the number of separate mixed-signal and display ICs simplifies the PCB and reduces assembly overhead. The 8 MHz CPU supports time-based measurement and display updates, while the 32 KB Flash and 1 KB SRAM accommodate meter firmware without external memory. Power performance must be assessed using the device low-power modes and the duty cycle of the scan interface, ADC conversions, and LCD updates. The meter's leakage budget and battery life must also include sensors, protection components, and the display.

💡

Electricity Metering Controller

The MSP430FW427IPM can form the metering-control section of an electricity meter or energy-measurement instrument where analog sensing and a local segmented display are required. Three 16-bit sigma-delta ADCs support low-frequency measurement channels, while the scan interface can organize access to sensor networks. The CPU16 core handles accumulation, time base, and display logic, and 32 KB of Flash accommodates firmware and calibration data. The 128-segment LCD controller simplifies the human interface. For a safety-relevant electricity meter, validate isolation, accuracy, watchdog behavior, and applicable metering regulations at the system level; MCU compliance alone does not establish compliance for the finished instrument.

خلاصه محصولات پیشنهادی

MSP430F427IPM Texas Instruments استفاده‌شده در: Rotary Water Meter, Gas Metering Instrument, Mechanical Flow Meter, Battery-Powered Metering Node, Electricity Metering Controller MSP430FW427IPMR Tape-and-reel ordering form of the same sensing MCU استفاده‌شده در: Rotary Water Meter, Mechanical Flow Meter, Battery-Powered Metering Node MSP430FW425IPMR Same-package MSP430 FW series sensing controller استفاده‌شده در: Gas Metering Instrument, Compact Industrial Sensing Panel, Electricity Metering Controller MSP430F427IPMR Same-family mixed-signal controller in a 64-pin LQFP package استفاده‌شده در: Compact Industrial Sensing Panel
What is the MSP430FW427IPM used for?
The MSP430FW427IPM is designed for rotary sensing and metering instruments, including gas and water meters. Its defining resources are an 8 MHz MSP430 CPU16 core, three 16-bit sigma-delta ADCs, a scan interface, 32 KB of Flash, 1 KB of SRAM, and a 128-segment LCD controller. According to the Texas Instruments product documentation, these resources consolidate analog measurement, control, and display functions into one 64-pin LQFP device.
What is the memory configuration of the MSP430FW427IPM?
The MSP430FW427IPM contains 32 KB of Flash memory organized as 32K x 8 plus 256 bytes and 1 KB of SRAM. This arrangement supports meter firmware, calibration coefficients, and measurement tables without requiring an external memory device. Texas Instruments describes the MSP430FW427 as a rotary sensing MCU with 32 KB of Flash and 1 KB of SRAM for gas and water metering applications.
How many ADC channels does the MSP430FW427IPM have?
The MSP430FW427IPM integrates three 16-bit sigma-delta ADCs. These converters are intended for low-frequency sensor measurements in metering systems, where the scan interface can organize the acquisition of signals from the sensing network. Texas Instruments identifies the MSP430F427 family as having three 16-bit sigma-delta ADCs, and the FW427 belongs to the same mixed-signal measurement platform.
Does the MSP430FW427IPM drive an LCD directly?
Yes, the MSP430FW427IPM includes a controller for a 128-segment LCD, supporting compact segmented meter displays without a separate display controller. The LCD resources are one reason this device is suited to water, gas, and rotary sensing products where the measured value is shown locally. Texas Instruments lists the 128-segment LCD capability as a core feature of the MSP430FW427 family.
What package and pin count does the MSP430FW427IPM use?
The MSP430FW427IPM is supplied in a 64-pin LQFP package measuring 10 x 10 mm. The 64-pin arrangement provides access to the mixed-signal inputs, LCD outputs, scan interface, and communications and control signals. Because the package has a large lead count, verify land-pattern alignment and solder-assembly capability when creating a new meter PCB.
Where can I download the MSP430FW427IPM datasheet?
The official MSP430FW427 datasheet is available through the Texas Instruments product page at https://www.ti.com/product/MSP430FW427. The ordering-code details, electrical characteristics, pin descriptions, and package drawings are documented there. Use the manufacturer document as the controlling reference for pin functions, recommended operating conditions, and PCB footprint dimensions.
Where is the MSP430FW427IPM pinout documented?
The MSP430FW427IPM pin assignments are documented in the pin-description tables of the Texas Instruments MSP430FW427 datasheet. The device uses a 64-pin LQFP outline, and the manufacturer document identifies the power, ground, analog-input, LCD, scan, and debug connections. Use that table when assigning every PCB net so the exposed requirements of the selected ordering option are followed.
What is the difference between MSP430FW427IPM and MSP430F427IPM?
The MSP430F427IPM retains the same memory, peripheral, and pin-out configuration as the FW427 while incorporating performance improvements. Texas Instruments describes the F427 as an 8 MHz sensing MCU with three 16-bit sigma-delta ADCs, 128 LCD segments, 32 KB of Flash, and 1 KB of RAM. Firmware and board validation should still be completed before substituting one ordering option for the other.
Can MSP430F427IPM replace MSP430FW427IPM?
The MSP430F427IPM is a strong same-package candidate because Texas Instruments states that it keeps the same memory, peripheral, and pin-out configuration while adding performance improvements. Both devices use a 64-pin LQFP package and an 8 MHz sensing-MCU architecture. Confirm the exact analog, LCD, scan, and firmware behavior against the manufacturer documentation before treating the substitution as production-qualified.
What is the best drop-in replacement for MSP430FW427IPM?
The closest documented same-package choice is the MSP430F427IPM, because Texas Instruments describes it as having the same memory, peripheral, and pin-out configuration with performance improvements. The MSP430FW425IPMR is another 64-pin LQFP member of the related FW family, but its exact scan and analog resources must be checked against the target design. No cross-manufacturer drop-in equivalence is documented for this device.
When should I choose MSP430FW427IPM instead of MSP430F427IPM?
Choose MSP430FW427IPM when the design specifically targets the FW427 rotary sensing feature set and its associated meter behavior, or when procurement continuity depends on that exact ordering code. Choose MSP430F427IPM when its documented performance improvements are beneficial and its unchanged memory, peripheral, and pin configuration has been validated. Firmware, timing, and mixed-signal performance must be retested for either decision.
Is MSP430FW427IPM suitable for water and gas meters?
Yes, the MSP430FW427IPM is suitable for water and gas meter designs because Texas Instruments identifies it as a rotary sensing MCU intended for those applications. The three 16-bit sigma-delta ADCs support sensor acquisition, the scan interface supports the sensing network, and the 128-segment LCD supports an integrated meter display. Mechanical and electrical compatibility with the selected sensor still requires board-level verification.
What are the key specifications of MSP430FW427IPM that engineers should know?
The key MSP430FW427IPM specifications are an 8 MHz MSP430 CPU16 core, 32 KB of Flash plus 256 bytes, 1 KB of SRAM, three 16-bit sigma-delta ADCs, a 128-segment LCD controller, a scan interface, 2.5 V and 3.3 V supply arrangements, and a 64-pin LQFP package. According to Texas Instruments, the device targets rotary sensing in gas and water metering products.
Where can I buy MSP430FW427IPM online?
Use the Request a Quote form on this page to request MSP430FW427IPM availability, current commercial terms, and a lead-time quotation. The device is listed for purchase through multiple authorized distribution channels, but pricing and stock change continuously and are therefore not quoted as static text here. Include the target quantity and requested packaging when submitting the request.
What is the price and lead time for MSP430FW427IPM?
Current MSP430FW427IPM pricing, stock, and lead time should be obtained through the Request a Quote form on this page because commercial terms are updated frequently. The orderable configuration is a 64-pin LQFP industrial-grade option, and purchasing channels also show a tape-and-reel ordering variant. State the required quantity and delivery schedule so the quotation reflects the correct package and packing arrangement.

داده‌های مرجع مهندسی برای MSP430FW427IPM — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MSP430FW427IPM when the product is a rotary gas, water, flow, or industrial sensing meter and the FW427 feature set is already validated in firmware or design practice. Its 32 KB Flash, 1 KB SRAM, three 16-bit sigma-delta ADCs, scan interface, and 128-segment LCD controller support an integrated metering design in a single 64-pin LQFP package. The MSP430F427IPM is a practical migration candidate because Texas Instruments describes the same memory, peripheral, and pin-out configuration, but performance improvements should be reviewed rather than assumed transparent. MSP430FW425IPMR and MSP430FW425IPM are same-package FW family alternatives, yet their exact ADC and scan resources require direct comparison with the target design. No cross-manufacturer part is documented as a true drop-in replacement, so an MCU from another vendor would require hardware and firmware redesign rather than substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول MSP430FW427IPMR MSP430FW425IPMR MSP430F427IPM MSP430F427IPMR MSP430FW425IPM
Package 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
CPU Core MSP430 CPU16 RISC MSP430 CPU16 RISC MSP430 FW family MSP430 CPU16 RISC MSP430 CPU16 RISC MSP430 FW family
Maximum Clock Frequency 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz

تفاوت‌های کلیدی

  • Dedicated rotary sensing MCU with integrated metering resources (در مقابلMSP430F427IPM)
  • Integrated measurement and display subsystem (در مقابلMSP430FW425IPMR)
  • Pin-compatible family migration path (در مقابلMSP430F427IPMR)

یادداشت‌های طراحی

Route analog sensor inputs as short, quiet traces and place filtering or protection components near the relevant device pins. The sigma-delta ADCs and scan interface are intended for metering signals, but external relay contacts, LCD drive lines, and switching-power stages can inject noise into a high-impedance sensor node. Keep the analog ground and digital return paths controlled, and follow the grounding topology shown in the manufacturer reference design when creating a new meter board.

Do not treat the MSP430FW427IPM and MSP430F427IPM as firmware-interchangeable without review. Texas Instruments states that the F427 keeps the same memory, peripheral, and pin-out configuration while incorporating performance improvements, but timing, low-power behavior, and peripheral details still require confirmation. For an FW425 substitution, verify the ADC count, scan behavior, LCD configuration, boot process, and application code against the exact manufacturer documentation before releasing the PCB.

Budget the meter's average current from the complete operating cycle rather than from the CPU clock rate alone. ADC conversions, scan-interface activity, LCD updates, sensor excitation, and external circuitry can dominate the energy budget in a battery-powered design. Measure each active and low-power state with the final LCD and sensor network attached, then confirm that the supply voltage remains within the permitted range at the highest transient load.

Use the 64-pin LQFP land pattern and thermal-via arrangement defined by the Texas Instruments package drawing. The 10 x 10 mm body has closely spaced leads, so stencil thickness, paste volume, reflow profile, and assembly inspection should be controlled during PCB bring-up. Confirm the exact pad dimensions and pin-one orientation against the current manufacturer documentation before releasing artwork for fabrication.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The component is listed as an industrial-grade part, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified in the referenced listings. Confirm compliance documentation for the exact ordering code with the manufacturer or the authorized supply channel.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MSP430FW427IPM datasheet MSP430FW427IPM pinout MSP430FW427IPM specifications Texas Instruments MSP430FW427IPM MSP430FW427IPM 64-LQFP footprint MSP430FW427IPM price MSP430FW427IPM stock MSP430FW427IPM replacement MSP430FW427IPM vs MSP430F427IPM MSP430FW427IPM water meter MSP430FW427IPM gas meter MSP430FW427IPM ADC channels

قطعات و اصطلاحات مرتبط

Texas Instruments MSP430FW427IPM MSP430FW427 MSP430FW427IPMR MSP430FW425IPMR MSP430FW425IPM MSP430F427IPM MSP430F427IPMR MSP430 CPU16 16-bit RISC microcontroller mixed-signal microcontroller rotary sensing MCU sigma-delta ADC 16-bit ADC scan interface 128-segment LCD 32 KB Flash 1 KB SRAM 64-pin LQFP 10 x 10 mm LQFP gas meter water meter rotary flow meter industrial temperature grade 2.5 V and 3.3 V operation
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ