OPA104BM - Low-Noise JFET Op Amp | Texas Instruments
MPN: OPA104BM ✓ فعالOPA104BM نمای کلی
A JFET operational amplifier is a voltage-input amplifier whose input stage uses junction field-effect transistors. It belongs to the operational amplifier hierarchy, which sits within analog ICs, analog signal-chain ICs, and semiconductor devices. Unlike bipolar-input amplifiers, JFET-input amplifiers can offer exceptionally low input bias current while retaining useful voltage-noise performance. This makes the OPA104BM appropriate for electrostatic sensors, photodetectors, chemical sensors, and laboratory instruments in which source impedance may be very high.
The OPA104BM combines a JFET input stage, one amplifier circuit, and a wide ±5 V to ±20 V operating range. The specified 0.15 pA input bias current helps minimize errors when working with picoamp-level leakage or very high source impedances. Its TO-99-8 mechanical format provides an eight-terminal metal-can package with a 4.7 mm lead pitch. Because it is a single amplifier rather than a quad device, systems requiring several precision channels must use multiple packages or choose a different multi-channel amplifier family.
The metal-can construction and through-hole lead format distinguish the OPA104BM from modern surface-mount operational amplifiers. Its long connection leads and metal shell are useful where a conventional through-hole footprint is preferred, for example in laboratory equipment, selected industrial instrumentation, and legacy control systems. Designers should treat the package pin arrangement as critical: the TO-99 lead numbering and function sequence must be checked against the manufacturer pin-description table before assigning input, output, supply, offset-null, and compensation connections.
Typical uses include precision current-to-voltage conversion, guarded sensor amplifiers, low-leakage capacitance measurements, photodiode signal conditioning, and analog instrumentation powered from split supplies. A ±5 V operating range supports low-voltage systems, while operation up to ±20 V accommodates higher-voltage laboratory rails. The amplifier is particularly useful when source current must remain small compared with the signal being measured, provided the circuit also maintains suitable common-mode voltage, output swing, noise, and stability for the selected feedback network.
A key design consideration is that low bias current alone does not determine overall measurement accuracy. Input capacitance, source impedance, resistor thermal noise, offset voltage, input common-mode range, output swing, and printed-circuit-board contamination can dominate the error budget. Guarding, clean PCB layouts, suitable resistor values, and stable reference supplies are therefore essential. This page combines package information, source-family drop-in options, parameter comparisons, and application guidance to support design decisions beyond a basic distributor listing.
جایگزینهای drop-in برای OPA104BM — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
OPA104CM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
OPA104DM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
OPA104TM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
OPA104UM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
OPA104BM
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←OPA104BM حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | JFET operational amplifier |
| Number of Circuits | 1 circuit |
| Input Bias Current | 0.15 pA |
| Supply Voltage Range | ±5 V to ±20 V |
| بستهبندی | TO-99-8 metal can |
| Number of Terminals | 8 terminals |
| Lead Pitch | 4.7 mm |
| نوع نصب | Through-hole |
| Package Shape | Round |
| Terminal Form | Wire |
| وضعیت RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
راهنمای پیکربندی پین OPA104BM round
پیکربندی پین برای OPA104BM (پکیج round). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای OPA104BM.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
OPA104BM مناسب است برای 6 کاربردs: Photodiode Signal Conditioning, High-Impedance Sensor Interface, Precision Current-to-Voltage Conversion, Laboratory Instrumentation, Low-Level Analog Signal Conditioning, Audio and Measurement Buffers.
Photodiode Signal Conditioning
OPA104BM fits photodiode and phototransistor preamplifiers because its 0.15 pA input bias current limits the current drawn from a high-impedance detector. The device can be configured as a transimpedance amplifier with feedback resistance and compensation capacitance selected for the detector capacitance, bandwidth, and settling requirements. Its ±5 V to ±20 V supply range supports split analog rails commonly used around optical receivers. The principal benefit is reduced error from input leakage, although total accuracy still depends on resistor thermal noise, photodiode capacitance, input protection leakage, and guard-ring construction.
پیشنهادی
High-Impedance Sensor Interface
OPA104BM is appropriate for electrochemical, capacitive, piezoelectric, and other sensors whose source impedance is high enough that amplifier bias current could disturb the measurement. Its 0.15 pA input bias current allows very small sensor currents to develop measurable voltages across a practical feedback network. The circuit should still include input clamping, defined guarding, and a bias-return path so the amplifier inputs do not float. Engineers must also verify common-mode range, output swing, and stability because ultra-low input current does not remove those separate design constraints.
پیشنهادی
Precision Current-to-Voltage Conversion
OPA104BM can serve as the transimpedance element in precision current-to-voltage converters for picoamp-level or microamp-level currents. The specified 0.15 pA input bias current is small relative to many sensor-generated currents, helping preserve measurement resolution. A practical implementation combines a feedback resistor with a compensation capacitor to control bandwidth and prevent instability. Because the TO-99-8 package is through-hole, it may also simplify prototyping in laboratory and legacy industrial instruments, although PCB cleanliness remains essential when leakage and surface contamination affect the result.
پیشنهادی
Laboratory Instrumentation
OPA104BM is useful in laboratory amplifiers, buffer stages, null detectors, and precision analog measurement systems that benefit from a JFET input. Its single-amplifier configuration allows an engineer to tailor gain, bandwidth, offset adjustment, and compensation for one instrument channel without relying on a multi-amplifier package. The ±5 V to ±20 V operating range accommodates several conventional laboratory supply combinations. A metal-can through-hole format can suit handmade or long-life analytical equipment, but production designs should verify thermal behavior, connector grounding, and the exact manufacturer pin sequence.
پیشنهادی
Low-Level Analog Signal Conditioning
OPA104BM is applicable to low-level analog signal conditioning when the source presents very high impedance and the amplifier should avoid loading it with bias current. A non-inverting or differential stage can use the amplifier's low input current while operating from split supplies, subject to common-mode and output-swing limits. Designers should select feedback resistors to balance Johnson noise against bandwidth, use short, guarded traces, and avoid nearby high-impedance contamination paths. The device is particularly attractive when the signal source is more sensitive to loading than to the amplifier's voltage-noise contribution.
پیشنهادی
Audio and Measurement Buffers
OPA104BM can be used as an input buffer or active gain stage in selected audio and measurement circuits where low input current is more important than minimum noise or maximum slew rate. Its JFET input avoids the comparatively high base current associated with bipolar-input amplifiers, making it suitable for high-impedance source networks. However, audio designs must verify bandwidth, output-drive capability, distortion, and output-voltage headroom for the selected supply rails. The 0.15 pA bias-current specification supports high-impedance buffering, while voltage-noise and gain-bandwidth characteristics determine its suitability for audio bandwidth.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای OPA104BM — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | OPA104CM | OPA104DM | OPA104TM | OPA104UM | OPA104BM |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TO-99-8 metal can | TO-99-8 metal can | TO-99-8 metal can | TO-99-8 metal can | TO-99-8 metal can | TO-99-8 metal can |
| Number of Terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals | 8 terminals |
تفاوتهای کلیدی
- Exceptionally low specified input bias current for precision high-impedance measurement (در مقابلOPA104CM)
- Wide split-supply operating range (در مقابلOPA104DM)
- Single-amplifier 8-terminal TO-99 format (در مقابلOPA104TM)
یادداشتهای طراحی
Keep the OPA104BM input nodes physically short and isolate them from high-impedance leakage paths. Use a guarded input trace or guard ring where practical, remove flux residue, and avoid nearby switching nodes or exposed high-impedance test points. Because the specified input bias current is 0.15 pA, PCB contamination and surface leakage can be comparable to the intended input current and degrade measurement accuracy.
Do not assume that the TO-99-8 package follows a modern DIP numbering sequence. Assign every terminal, including offset-null and compensation functions, from the manufacturer pin-description table. Incorrect lead assignment can place supply voltage on an input, prevent normal operation, or damage the amplifier. Also verify that the selected feedback network remains stable with the input capacitance present in the intended layout.
The OPA104BM operates from ±5 V to ±20 V, so the supply rails must remain within that range under startup, transient, and fault conditions. Use local supply bypassing and adequate decoupling at the device pins, with routing that minimizes loop area. For transimpedance applications, begin with a conservative feedback capacitor and increase bandwidth only after checking stability against detector capacitance and board parasitics.
اطلاعات انطباق
Compliance declarations are not stated in the manufacturer or distributor records for this exact MPN. AEC-Q100 is not applicable because the OPA104BM is an instrumentation amplifier rather than an automotive-qualified device.