PCM1753DBQ - 24-Bit 192kHz Stereo DAC | Texas Instruments
MPN: PCM1753DBQ ✓ فعالPCM1753DBQ نمای کلی
An audio DAC is a mixed-signal integrated circuit that converts digital PCM audio samples into analog left- and right-channel voltages. Within the signal-chain hierarchy, the PCM1753DBQ belongs to the digital-to-analog converter class, sits between a digital audio source and an analog output stage, and forms part of the broader audio converter and signal-processing IC category. Its enhanced multilevel delta-sigma architecture supports high-resolution playback while using oversampled digital filtering to suppress out-of-band noise.
Key features include 24-bit resolution, 192 kHz sampling capability, 4-times or 8-times digital oversampling, and -50 dB stop-band attenuation. The three-wire serial control port supports register-write functions and user-programmable settings, while hardware-mode operation is also available. These controls let a host processor configure attenuation, data format, filtering, and other playback behavior without requiring an external analog volume control.
The PCM1753DBQ produces one stereo analog output pair and requires external filtering to reconstruct the analog waveform from the converter's delta-sigma output. Decoupling and layout therefore determine whether the converter's specified 106 dB SNR and 0.002% THD+N are preserved in the finished design. A low-noise 5 V analog supply and a quiet digital return path are essential for high-resolution playback.
Typical uses include A/V receivers, DVD movie players, DVD add-on cards, CD players, and other consumer audio products with digital S/PDIF-to-I2S input stages. The part also suits multimedia systems where a 192 kHz-capable stereo DAC must share a board with a digital audio processor. Its software-control interface is particularly useful when the host processor must apply volume, mute, or filter settings dynamically.
Designers should follow the pin-description table, analog-output filter examples, and power-supply recommendations in the manufacturer datasheet. Pay particular attention to the function of pin 5, because the PCM1753 differs from the pin-compatible PCM1748, PCM1742, and PCM1741 at that position rather than functioning as an unrestricted replacement.
This page adds a practical comparison of PCM175x drop-in options, package constraints, control-mode differences, and layout guidance that are not consolidated in the manufacturer product page. It also identifies where application-specific verification is required before substituting a related converter.
جایگزینهای drop-in برای PCM1753DBQ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
PCM1754DBQ
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM1754DBQG4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM1755DBQ
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM1755DBQG4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM1753DBQG4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM1753DBQ حداکثر مقادیر مجاز و مشخصات الکتریکی
| رزولوشن | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 106 dB typical |
| Dynamic Range | 106 dB at VCC = 5 V |
| Total Harmonic Distortion Plus Noise | 0.002% typical at VCC = 5 V |
| Full-Scale Output | 4 VPP typical |
| Digital Oversampling | 4-times or 8-times |
| Stop-Band Attenuation | -50 dB |
| ولتاژ تغذیه | 5 V single supply |
| Digital Audio Interface | I2S |
| Control Interface | 3-wire serial control port with register-write functions |
| Operating Modes | Hardware mode and software-control mode |
| Converter Architecture | Enhanced multilevel delta-sigma |
| Channel Configuration | Stereo dual-channel DAC |
| بستهبندی | 16-lead SSOP (DBQ) |
| نوع نصب | Surface mount |
| Lead-Free Status | Lead-free |
| Primary Applications | A/V receivers, DVD movie players, DVD add-on cards |
راهنمای پیکربندی پین PCM1753DBQ 16-lead ssop (dbq)
پیکربندی پین برای PCM1753DBQ (پکیج 16-lead ssop (dbq)). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای PCM1753DBQ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PCM1753DBQ مناسب است برای 6 کاربردs: High-Resolution CD and Network Audio Player, A/V Receiver Stereo DAC Stage, DVD Movie Player Audio Output, Multimedia Console and Gaming Audio, Portable Hi-Fi Headphone-Drive Front End, Digital Audio Interface and Converter Card.
High-Resolution CD and Network Audio Player
The PCM1753DBQ fits a digital-audio playback board that accepts 24-bit I2S data and converts it to a stereo analog output. Its 192 kHz sampling capability supports high-resolution sources, while the 106 dB typical SNR and 0.002% typical THD+N establish the converter-side performance target. Place the device behind the host audio processor, decouple the 5 V rail at its pins, and use the manufacturer's reconstruction-filter network. Compared with an integrated receiver codec, the discrete DAC provides a shorter analog path and independent control over oversampling and attenuation.
پیشنهادی
A/V Receiver Stereo DAC Stage
Use the PCM1753DBQ in an A/V receiver when the main signal chain needs a dedicated 192 kHz-capable stereo conversion stage. Its single 5 V supply and 16-lead SSOP package simplify board partitioning, while the three-wire control port permits the receiver controller to set volume, mute, and filtering behavior. Compared with integrating the converter into a large mixed-signal codec, this implementation gives the analog output section its own component-level noise and distortion budget. Keep the digital audio and control traces away from the sensitive analog output nodes during layout.
پیشنهادی
DVD Movie Player Audio Output
The PCM1753DBQ is suitable for the stereo analog output of a DVD movie player that receives decoded digital audio from a host controller. The converter supports I2S data, hardware-mode operation, and programmable serial control, allowing either a fixed configuration or runtime attenuation adjustments. Its 106 dB typical dynamic range supports playback across quiet passages and high-level program material. Follow the DVD application's reference topology, including the analog reconstruction filter, and provide a quiet analog supply to preserve the 0.002% typical THD+N performance.
پیشنهادی
Multimedia Console and Gaming Audio
The PCM1753DBQ can provide a dedicated stereo output channel for a multimedia console, gaming system, or audiovisual accessory with a digital audio bus. Its 192 kHz capability allows the host to select high-rate content when the source and software path support it, while the software-control port handles mute and volume changes without an external analog potentiometer. The converter's separate stereo outputs and I2S interface simplify connection to a line-level amplifier. Compare the added board cost against an integrated codec when the system does not require a separate 192 kHz playback path.
پیشنهادی
Portable Hi-Fi Headphone-Drive Front End
The PCM1753DBQ can form the digital front end of a portable high-fidelity headphone amplifier, accepting 24-bit audio from a host processor and driving a low-noise analog stage. Its 24-bit resolution and 0.002% typical THD+N are useful when the amplifier and headset have sufficient bandwidth to preserve the converter's dynamic range. The software-control interface allows system-level volume and mute management, but the 5 V supply requirement must be reconciled with battery-powered operation. Compare this discrete approach with a lower-power integrated headphone DAC when energy consumption dominates the design.
پیشنهادی
Digital Audio Interface and Converter Card
The PCM1753DBQ is appropriate for a plug-in digital-audio converter card that accepts I2S from an external source and presents a stereo analog output. Its 16-lead SSOP package leaves board area for filtering, output amplifiers, and connectors, while the 192 kHz capability supports high-resolution source material. Use the three-wire serial control port for hardware-compatible volume, mute, and filter configuration when the host can drive the interface. For designs using a PCM174x device, check pin 5 carefully because the PCM1753 differs from those converters at that terminal.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PCM1753DBQ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | PCM1754DBQ | PCM1754DBQG4 | PCM1755DBQ | PCM1755DBQG4 | PCM1753DBQG4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-16 (DBQ) | SSOP-16 (DBQ) - same | SSOP-16 (DBQ) - same | SSOP-16 (DBQ) - same | SSOP-16 (DBQ) - same | SSOP-16 (DBQ) - same |
| Converter Type | Stereo delta-sigma DAC | Stereo delta-sigma DAC | Stereo delta-sigma DAC | Stereo delta-sigma DAC | Stereo delta-sigma DAC | Stereo delta-sigma DAC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz | 192 kHz | 192 kHz | 192 kHz |
| Supply Voltage | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply | 5 V single supply |
| Control Interface | 3-wire serial control with register-write functions | 3-wire serial control | 3-wire serial control | 3-wire serial control | 3-wire serial control | 3-wire serial control |
تفاوتهای کلیدی
- Published complete-replacement path within the PCM175x family (در مقابلPCM1754DBQ)
- Identical electrical design in the G4 ordering designation (در مقابلPCM1753DBQG4)
- Explicit 106 dB dynamic range and 0.002% THD+N specification (در مقابلPCM1755DBQ)
- Software configuration without changing the PCB (در مقابلPCM1748DBQ)
یادداشتهای طراحی
Treat the analog output path as a high-impedance signal path even though the converter is a 24-bit device. Place the reconstruction-filter components close to the analog output pins, minimize the distance from the DAC outputs through the filter to the next stage, and keep switching-regulator nodes and digital clock traces away from those components. A solid analog ground plane with short return paths is more effective than a complex ground split. Validate the final layout for THD+N and dynamic range with the complete output-filter and amplifier chain connected.
Decouple the 5 V supply at the converter using the capacitor values and placement shown in the manufacturer application circuit. Keep supply-current return loops within the converter's local ground area, and avoid sharing a narrow return segment with digital processor current. The specified 106 dB SNR is sensitive to supply ripple and ground noise even though the device is a digital-to-analog converter. If a switching regulator supplies the analog rail, filter it appropriately and keep its high-current switching loop physically separated from the DAC and reconstruction filter.
Do not assume that every PCM174x-family device is an unrestricted substitute for the PCM1753. Texas Instruments identifies pin 5 as the exception to the stated compatibility with PCM1748, PCM1742, and PCM1741. Check the target board's pin 5 connection, the meaning of the replacement device's terminal, and any control-register differences before ordering. For PCM175x substitutes, confirm oversampling mode, attenuation behavior, analog filter expectations, and the host controller's register sequence.
Route I2S data, clock, and serial-control lines as controlled-impedance digital signals, and provide a continuous ground reference beneath them. Account for the host processor's I2S timing, data validity, and clock-edge requirements; the PCM1753DBQ must receive a valid 192 kHz stream for maximum-rate operation. Keep the data bus away from the analog outputs because converter-edge energy can couple into the high-impedance filter nodes and degrade the expected 0.002% THD+N performance.
اطلاعات انطباق
The PCM1753 is identified as a lead-free device in the manufacturer series documentation. RoHS, REACH, halogen-free, and conflict-minerals statements were not established from the cited manufacturer product information.