PCM3010DB - 24-Bit Stereo Audio Codec | Texas Instruments
MPN: PCM3010DB ✓ فعالPCM3010DB نمای کلی
An audio codec is an interface IC that converts analog audio into a digital bitstream and reconstructs digital audio into analog signals. The PCM3010 combines both conversion paths in one package, reducing component count in cost-sensitive consumer equipment. Its digital interface connects a digital audio processor, microcontroller, or other host with external analog microphones, line-level sources, speakers, headphones, and other audio circuits.
Key features include 24-bit stereo conversion, single-ended analog input and output, 64-times ADC oversampling, 8-times DAC oversampling, simultaneous ADC and DAC operation, and power-down capability. The 96 kHz maximum ADC sampling rate supports high-rate digital audio capture, while the 192 kHz maximum DAC rate supports higher-rate playback and multimedia applications. The integrated codec architecture avoids separate ADC and DAC packages when both conversion directions are required.
The converters rely on delta-sigma modulation to shape quantization noise away from the audio band. According to the Texas Instruments PCM3010 datasheet, the ADC path includes a digital decimation filter with a high-pass filter, while the DAC path includes an 8-times-oversampling filter stage. The device is fabricated using CMOS technology and is intended for cost-sensitive consumer applications where compactness and integrated audio conversion are important.
Typical uses include digital audio recorders, multimedia appliances, USB and portable audio equipment, consumer audio processors, and mixed-signal systems requiring both microphone capture and audio playback. In these systems, the PCM3010 can accept a single-ended analog source, provide a digital serial stream to the audio engine, and return a digital stream for analog playback. The integrated power-down function can reduce system power when the codec is not needed.
Careful PCB layout is essential because high-resolution audio converters combine sensitive analog inputs with clocked digital signals. Place analog and digital return-current paths separately, decouple the supply close to the device, use a quiet analog reference source, and route the serial data and clock nets away from input pins. Select external input and output filtering according to the intended source impedance, anti-alias requirements, and output-load network.
This product page organizes the PCM3010DB specifications, conversion architecture, application guidance, pinout reference, and confirmed same-footprint alternatives into one engineering-focused resource. It also distinguishes exact package compatibility from merely similar codecs, helping designers verify replacement requirements before committing a new board revision.
جایگزینهای drop-in برای PCM3010DB — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
PCM3010DBR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PCM3010DB مشخصات
| ADC Resolution | 24 bit |
| DAC Resolution | 24 bit |
| Maximum ADC Sampling Rate | 96 kHz |
| Maximum DAC Sampling Rate | 192 kHz |
| ADC Oversampling Ratio | 64 times |
| DAC Oversampling Ratio | 8 times |
| Channel Configuration | Stereo |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| Conversion Architecture | Delta-sigma modulation |
| ADC Decimation Filter | Digital filter with high-pass filter |
| Process Technology | CMOS |
| بستهبندی | 24-pin SSOP |
| Power-Down Function | ADC and DAC simultaneous power-down |
راهنمای پیکربندی پین PCM3010DB 24-pin ssop
پیکربندی پین برای PCM3010DB (پکیج 24-pin ssop). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای PCM3010DB.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PCM3010DB مناسب است برای 6 کاربردs: Digital Audio Recorders, USB Audio Interfaces, Portable Audio Devices, Multimedia Audio Systems, Consumer Audio Processing, Audio Test and Measurement.
Digital Audio Recorders
PCM3010DB fits digital recorders that need simultaneous stereo capture and playback in one compact interface IC. Its 24-bit ADC operates at up to 96 kHz and uses 64-times oversampling, while the 24-bit DAC supports playback up to 192 kHz. Place the codec behind an analog front end that establishes microphone bias, gain, source impedance, and anti-alias filtering. Provide a stable master clock and compatible digital interface to the storage controller, and keep the clock and serial traces away from the single-ended analog inputs to preserve signal integrity.
پیشنهادی
USB Audio Interfaces
PCM3010DB is suitable for USB audio interfaces that require integrated analog conversion beside a digital audio controller. The 24-bit ADC can capture at up to 96 kHz, and the stereo DAC supports playback at up to 192 kHz, covering common recording and high-rate playback rates. The codec can share the controller’s digital audio infrastructure when interface timing and mode requirements match. Separate analog and digital return paths, short supply bypass connections, and controlled clock routing are essential for minimizing converter noise and avoiding data-dependent distortion.
پیشنهادی
Portable Audio Devices
PCM3010DB supports portable audio devices where component count, conversion resolution, and board area are important. Its integrated 24-bit ADC and DAC remove two separate converter packages, while single-ended analog input and output simplify connection to cost-sensitive signal paths. The ADC rate reaches 96 kHz and the DAC rate reaches 192 kHz, allowing the same codec to address recording and higher-rate playback. Use the simultaneous ADC-and-DAC power-down function during inactive operating periods and budget supply current across every enabled converter state.
پیشنهادی
Multimedia Audio Systems
PCM3010DB is appropriate for multimedia appliances that need a compact stereo ADC and DAC with a common digital audio path. Its 24-bit conversion resolution suits consumer playback, monitoring, and sound-capture functions, while 96 kHz ADC and 192 kHz DAC rates cover high-rate audio streams. The single-ended outputs can drive a line-level amplifier when the external network is designed for the codec’s output characteristics. Keep analog filtering separate from digital routing and check the master-clock requirement against the system audio controller.
پیشنهادی
Consumer Audio Processing
PCM3010DB can serve cost-sensitive consumer audio processors that convert between analog sources and a digital audio engine. The integrated delta-sigma converters, 24-bit resolution, and oversampling filters reduce the need for separate conversion components. The ADC’s digital decimation filter includes a high-pass function, while the DAC uses an 8-times-oversampling filter stage, allowing the host processor to receive a filtered digital stream. Design the input gain, reference behavior, output reconstruction filter, and digital clock source directly from the manufacturer application guidance.
پیشنهادی
Audio Test and Measurement
PCM3010DB may be used in compact audio test equipment where a controller needs both an analog capture path and an analog playback source. The 24-bit ADC supports sampling through 96 kHz, while the 24-bit DAC can generate playback signals through 192 kHz, enabling loopback, signal generation, and monitoring functions. For accurate measurements, account for analog gain, converter filtering, clock accuracy, and output loading rather than treating digital resolution as the only error contributor. A quiet reference and isolated analog section help preserve test repeatability.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PCM3010DB — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | PCM3010DBR |
|---|---|---|
| Package | 24-pin SSOP | 24-pin SSOP |
| Brand | Texas Instruments | Texas Instruments |
تفاوتهای کلیدی
- Integrated bidirectional stereo conversion (در مقابلPCM3010DBR)
- Higher maximum DAC sampling rate than ADC sampling rate (در مقابلPCM3010DBR)
- Dual delta-sigma conversion paths (در مقابلPCM3010DBR)
یادداشتهای طراحی
Separate the analog input and output paths from the digital clock and serial-data routes. Place the codec’s supply bypass capacitors close to the associated pins, keep the analog ground current return continuous beneath the analog section, and avoid routing the master clock beneath the single-ended input pins. Confirm the exact pin names and recommended layout in the Texas Instruments PCM3010 datasheet before releasing artwork.
Use a low-jitter, stable master clock because delta-sigma conversion and digital decimation depend on accurate timing. Match the host interface’s data, bit-clock, and frame signals to the selected PCM3010 operating mode, and provide controlled impedance routing for high-speed edges. Do not substitute a generic clock source without checking frequency, amplitude, and timing margins in the manufacturer electrical tables.
Do not treat the 24-pin SSOP body as proof of pin compatibility. The 24-pin SSOP footprint must also match lead pitch, body width, lead span, pin-1 location, and solder-mask geometry, while individual functions such as clocks, analog inputs, analog outputs, and digital interface signals must be verified one by one. This check is especially important when considering PCM3010DBR or any third-party codec.
Budget power across analog supply, digital supply, enabled converters, clock activity, and analog output load. Use the manufacturer electrical-characteristics tables for maximum-current values rather than estimating from nominal operating current. Include startup sequencing and power-down behavior in the system budget, especially when the codec shares regulated rails with switching converters or a high-speed digital controller.
Keep switching-regulator loops and high-current digital return paths away from the analog input and reference network. A quiet supply helps preserve converter performance, but layout still requires local decoupling, controlled return current, and an output reconstruction or anti-alias network appropriate to the analog bandwidth. Verify conducted and radiated emissions at the finished-product level because codec clocking can contribute to EMI peaks.
اطلاعات انطباق
The manufacturer product information describes a CMOS consumer audio codec but does not state the requested compliance statuses. Automotive qualification is not indicated for this consumer-focused part.