PIC16C64A-04I/PT - 8-bit OTP MCU, 3.5KB, 33 I/O | Microchip
MPN: PIC16C64A-04I/PT ✗ پایان تولیدPIC16C64A-04I/PT نمای کلی
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, RAM, and peripherals on one die. Within the broader taxonomy, MCUs belong to microcontrollers, then embedded processors, then semiconductors. The PIC16C family specifically targets cost-sensitive, low-power, deterministic real-time control tasks and is known for its RISC-like 35-instruction set, single-cycle execution at 4 MHz, and Harvard architecture that separates program and data buses. PIC16C64A-04I/PT fits this niche as an intermediate-density device with enhanced I/O and serial communication capability.
Key features of the PIC16C64A-04I/PT include its 33 digital I/O lines distributed across multiple ports, 8-channel 8-bit A/D converter with external reference option, two 8-bit timers plus one 16-bit timer with prescaler, USART for asynchronous and synchronous serial communication, and an 8-bit parallel slave port for external bus interfacing. The OTP memory architecture allows factory or prototype programming, which is cost-effective for low-volume or mature products.
Internally, the device uses a 14-bit instruction word, an 8-bit data path, and a two-stage pipeline, providing predictable single-instruction-cycle latency (250 ns at 4 MHz) for time-critical control loops. The integrated Watchdog Timer with its own on-chip RC oscillator adds fault-recovery capability, and the Power-on Reset (POR) and Brown-out Reset (BOR) circuits simplify power-supply design. The device supports in-circuit serial programming (ICSP) via two pins.
Typical applications include industrial control panels, appliance control boards, automotive body electronics (non-safety), sensor interface modules, and legacy embedded systems that have already been qualified on the PIC16C architecture. The wide 2.5-6.0V supply tolerance allows direct connection to 5V or 3.3V rails, and the 33 I/O count suits systems with multiple digital sensors, keypads, or LED arrays.
When designing with this part, note that the 'I' suffix denotes the industrial temperature range and the 'PT' suffix denotes the 44-pin TQFP package. The 4 MHz speed grade is appropriate for systems that do not need the higher 20 MHz capability. Because this is an OTP device, code is permanently locked after programming; consider PIC16F64 (Flash) or PIC16C65B for reprogrammable variants during development.
This page synthesizes distributor stock levels, parametric comparisons, and practical design notes for the PIC16C64A-04I/PT, providing engineering context beyond the manufacturer datasheet.
جایگزین‌های drop-in برای PIC16C64A-04I/PT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC16C64A-04I/PT (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, RoHS Status, Timers, Operating Temperature Range, Program Memory Type.
PIC16F64-I/PT
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC16C65B-20I/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C64A-04E/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C64A-04I/PQ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C64A-04I/P
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C64A-04I/PT حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | 8-bit PIC |
| Family | PIC16C Series |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 3.5 KB (2K x 14) |
| RAM | 128 bytes |
| Data EEPROM | 0 bytes |
| حداکثر فرکانس کلاک | 4 MHz |
| Instruction Cycle Time | 250 ns at 4 MHz |
| Supply Voltage (Vdd) | 2.5 V to 6.0 V |
| I/O Pins | 33 |
| Timers | 2 x 8-bit + 1 x 16-bit |
| A/D Converter | 8-channel, 8-bit |
| Communication | USART (SCI), SPI/I2C (SSP) |
| Parallel Slave Port | Yes, 8-bit |
| دمای کاری | -40C to +85C (Industrial) |
| بسته‌بندی | 44-pin TQFP (PT) |
| نوع نصب | Surface Mount |
| Watchdog Timer | Yes (with dedicated RC oscillator) |
| Brown-out Reset | Yes |
| In-Circuit Programming | ICSP, 2-wire |
پیکربندی پین PIC16C64A-04I/PT
| پین 1 | MCLR/Vpp — Master Clear (Reset) input or ICSP programming voltage input |
| پین 2 | RA0/AN0 — PORTA bit 0 / Analog input channel 0 |
| پین 3 | RA1/AN1 — PORTA bit 1 / Analog input channel 1 |
| پین 4 | RA2/AN2 — PORTA bit 2 / Analog input channel 2 |
| پین 5 | RA3/AN3/Vref — PORTA bit 3 / Analog input channel 3 / ADC voltage reference |
| پین 6 | RA4/T0CKI — PORTA bit 4 / Timer 0 clock input |
| پین 7 | RA5/AN4/SS — PORTA bit 5 / Analog input channel 4 / SPI Slave Select |
| پین 8 | RE0/RD/AN5 — PORTE bit 0 / Parallel Slave Port read / Analog input 5 |
| پین 9 | RE1/WR/AN6 — PORTE bit 1 / Parallel Slave Port write / Analog input 6 |
| پین 10 | RE2/CS/AN7 — PORTE bit 2 / Parallel Slave Port chip select / Analog input 7 |
| پین 11 | Vdd — Positive supply voltage (2.5V to 6.0V) |
| پین 12 | Vss — Ground reference |
| پین 13 | OSC1/CLKIN — Oscillator crystal input or external clock input |
| پین 14 | OSC2/CLKOUT — Oscillator crystal output or 1/4 instruction-clock output |
| پین 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer 1 oscillator output / Timer 1 clock input |
| پین 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer 1 oscillator input / Capture-Compare-PWM 2 |
| پین 17 | RC2/CCP1 — PORTC bit 2 / Capture-Compare-PWM 1 |
| پین 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| پین 19 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port data bit 0 |
| پین 20 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port data bit 1 |
| پین 21 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port data bit 2 |
| پین 22 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port data bit 3 |
| پین 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| پین 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| پین 25 | RC6/TX/CK — PORTC bit 6 / USART transmit or synchronous clock |
| پین 26 | RC7/RX/DT — PORTC bit 7 / USART receive or synchronous data |
| پین 27 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port data bit 4 |
| پین 28 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port data bit 5 |
| پین 29 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port data bit 6 |
| پین 30 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port data bit 7 |
| پین 31 | Vss — Ground reference |
| پین 32 | Vdd — Positive supply voltage (2.5V to 6.0V) |
| پین 33 | RB0/INT — PORTB bit 0 / External interrupt input |
| پین 34 | RB1 — PORTB bit 1 |
| پین 35 | RB2 — PORTB bit 2 |
| پین 36 | RB3 — PORTB bit 3 |
| پین 37 | RB4 — PORTB bit 4 |
| پین 38 | RB5 — PORTB bit 5 |
| پین 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| پین 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| پین 41 | Vss — Ground reference |
| پین 42 | Vdd — Positive supply voltage (2.5V to 6.0V) |
| پین 43 | NC — Not connected (per datasheet) |
| پین 44 | NC — Not connected (per datasheet) |
کاربردهای معمول
PIC16C64A-04I/PT مناسب است برای 6 کاربردs: Industrial Control Panels, Appliance Control Boards, Automotive Body Electronics (Non-Safety), Sensor Interface Modules, Legacy Embedded System Sustainment, Educational and Hobbyist Projects.
Industrial Control Panels
The PIC16C64A-04I/PT fits industrial control panels that need 33 digital I/O for keypad scanning, multi-digit 7-segment LED multiplexing, and digital sensor aggregation. Its 2.5-6.0V supply range accepts unregulated 5V rails typical in industrial cabinets, and the industrial -40C to +85C operating range covers most factory-floor enclosures. The 4 MHz / 1 MIPS throughput is more than sufficient for scanning 4x4 keypads (sub-1 ms) and refreshing 8-digit displays (sub-10 ms). The integrated 8-channel 8-bit ADC adds direct temperature, pressure, or potentiometer reading without an external converter, reducing BOM cost.
پیشنهادی
Appliance Control Boards
The PIC16C64A-04I/PT is a strong match for appliance control boards (washing machines, microwave ovens, dishwashers, HVAC thermostats) that need 20-40 I/O for relay drivers, button inputs, and segment displays. The OTP memory prevents accidental firmware modification in the field, which is valuable for regulatory-locked products. The integrated USART supports simple modem or display-module communication, while the parallel slave port lets the MCU act as an I/O expander for a main processor. The wide 2.5-6.0V supply tolerates rectified 5V rails typical in appliances.
پیشنهادی
Automotive Body Electronics (Non-Safety)
For non-safety automotive body modules such as seat controllers, mirror adjusters, interior lighting, or HVAC blend-door actuators, the PIC16C64A-04I/PT's 33 I/O and USART fit the bill. Its 8-channel ADC reads thermistors for temperature-based control, and the 4 MHz performance handles 100 Hz control loops comfortably. Note that for safety-critical automotive applications, you must migrate to AEC-Q100-qualified parts like PIC16F876A-I/SP or PIC18F4520-I/P; the PIC16C64A family is NOT AEC-Q100 qualified. The 5V operation tolerates typical automotive 12V-derived rails after regulation.
پیشنهادی
Sensor Interface Modules
The PIC16C64A-04I/PT's integrated 8-channel 8-bit ADC, 33 digital I/O, and USART make it a fit for sensor-interface modules that aggregate multiple analog sensors (temperature, light, humidity, potentiometer) and forward the data to a host controller. The 2.5-6.0V supply works with 3.3V or 5V sensor rails, and the 4 MHz core processes 8-bit conversions at several kHz per channel. The Watchdog Timer with its own RC oscillator adds fault-recovery to unattended sensor nodes. For modern 10-/12-bit ADC needs, migrate to PIC16F88 or PIC16F1827.
پیشنهادی
Legacy Embedded System Sustainment
For sustaining production of mature products whose firmware is already qualified on the PIC16C64A architecture, the PIC16C64A-04I/PT remains the canonical replacement - it is pin-and-peripheral-compatible with the original PIC16C64A (CERDIP, PLCC) when migrating to surface-mount TQFP. Existing assembly or C code written for the PIC16C64A drops onto the PIC16C64A-04I/PT without modification. The '04' speed grade (4 MHz) matches legacy designs that did not need higher clock. Maintain stock of this NRND part for warranty and service contracts.
پیشنهادی
Educational and Hobbyist Projects
The PIC16C64A-04I/PT, with its 33 I/O, 8-channel ADC, USART, and parallel slave port, is an excellent teaching platform for embedded systems courses. Students can wire up keypads, LEDs, LCDs, and sensors without external multiplexer ICs. The 44-pin TQFP package requires breakout-board soldering, which is good QFP-handling practice. However, because PIC16C64A is OTP, students cannot iterate firmware in-circuit; we recommend PIC16F877A-I/P (40-pin DIP) or PIC16F64-I/PT (44-pin TQFP) for the actual development platform, keeping PIC16C64A-04I/PT for the final OTP-programmed target.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC16C64A-04I/PT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC16F64-I/PT | PIC16C65B-20I/PT | PIC16C64A-04E/PT | PIC16C64A-04I/PQ |
|---|---|---|---|---|---|
| Package | 44-pin TQFP (PT) | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 3.5 KB OTP | 3.5 KB Flash | 7.2 KB OTP | 3.5 KB OTP - same | 3.5 KB OTP - same |
| Maximum Clock | 4 MHz | 4 MHz - same | 20 MHz | 4 MHz - same | 4 MHz - same |
| RAM | 128 bytes | 128 bytes - same | 192 bytes | 128 bytes - same | 128 bytes - same |
| I/O Pins | 33 | 33 - same | 33 - same | 33 - same | 33 - same |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C - same | -40C to +85C - same | -40C to +125C (Extended) | -40C to +85C - same |
| Memory Type | OTP (one-time programmable) | Flash (reprogrammable) | OTP (one-time programmable) | OTP - same | OTP - same |
| Migration Path | Original NRND part | Flash drop-in for development | Microchip's recommended newer replacement | Extended-temp variant | Same die, alternative reel code |
تفاوت‌های کلیدی
- Microchip's officially recommended successor in same package (در مقابلPIC16C65B-20I/PT)
- Flash reprogrammability without changing footprint (در مقابلPIC16F64-I/PT)
- Extended temperature range for harsh environments (در مقابلPIC16C64A-04E/PT)
یادداشت‌های طراحی
Estimated: The 44-pin TQFP (PT) package has a 0.80 mm lead pitch and 10x10 mm body. Place a 0.1 uF ceramic decoupling capacitor within 3 mm of each Vdd pin (pins 11, 32, 42) to Vss (pins 12, 31, 41), with vias to an inner ground plane. The three Vdd/Vss pairs are NOT internally bonded on the PIC16C64A - each requires its own bypass capacitor. Use a continuous ground plane under the IC with thermal relief spokes only where the design requires rework.
The PIC16C64A is OTP (One-Time Programmable) - code cannot be erased or rewritten after the ICSP programming cycle completes. Verify firmware with a Flash equivalent (PIC16F64-I/PT) on the development bench before committing to OTP programming. OTP programming sets bits permanently; a single bad code lock bit can render the device a brick. Always keep a few pre-programmed PIC16F64-I/PT units as engineering spares for field recovery.
Estimated: The PIC16C64A-04I/PT typically draws 2-15 mA active and < 1 uA in Sleep mode at 5V and 4 MHz. Bulk-decouple Vdd with a 10 uF tantalum or ceramic capacitor near the IC, in addition to the 0.1 uF high-frequency bypass per Vdd pin. The Brown-out Reset (BOR) is factory-trimmed; if the supply rail is slow-rising (RC ramp-up), ensure the BOR re-arm time is accounted for in the firmware startup sequence, or use an external POR IC for slow-ramping supplies.
اطلاعات انطباق
RoHS and REACH compliant per Microchip product page. Lead-free (Pb-free) TQFP package. NOT AEC-Q100 qualified - do not use for automotive safety applications. Microchip recommends PIC16C65B for new designs (PIC16C64A is NRND).