PIC16C71T-04/SO - 4MHz OTP 8-bit MCU w/ADC, SOIC-18 | Microchip
MPN: PIC16C71T-04/SO ✓ فعالPIC16C71T-04/SO نمای کلی
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, working RAM, peripheral set, and I/O on one die. The PIC16C71 sits in the PIC16CXX mid-range family, which uses a 14-bit instruction word and a 35-instruction RISC core; its hypernym hierarchy is microcontroller -> embedded processor -> digital IC -> semiconductor. The 'C' suffix indicates EPROM/OTP program memory (non-volatile, one-time programmable in windowless package, UV-erasable in CERDIP windowed variants).
Key differentiating specifications include: 1.75 KB EPROM program memory, 36 B RAM, 13 I/O, four-channel 8-bit ADC, Timer0 (8-bit timer/counter with 8-bit prescaler), brown-out reset (BOR), watchdog timer, and 4 MHz clock speed. With BOR active, the part guarantees a clean reset when VDD falls below the BOR threshold, eliminating corrupted startup states on brown-out events. The RISC core executes most instructions in one oscillator cycle, giving ~1 MIPS at 4 MHz.
Typical applications include industrial control loops, sensor signal conditioning, automotive body controllers (non-safety), low-cost consumer appliances, and educational/embedded learning kits. The on-chip ADC is well-matched to bridge-sensor, thermistor, and potentiometer front-ends without requiring an external ADC.
When designing with this part, ensure that the program memory is sized for OTP programming flow before committing to PCB layout. Engineers migrating to a Flash-based PIC should consider the PIC16F71 as a drop-in upgrade with same peripheral set and pinout.
جایگزین‌های drop-in برای PIC16C71T-04/SO — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC16C71T-04/SO (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Timers, ADC, Program Memory Type, Core.
PIC16C71-04/SO
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C71T-04I/SO
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
PIC16C71T-04E/SO
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC16C711T-04I/SS
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C711T-04/SS
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C71T-04/SO حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | 8-bit PIC RISC (PIC16CXX mid-range) |
| Program Memory | 1.75 KB EPROM (OTP) |
| RAM | 36 B |
| I/O Pins | 13 |
| حداکثر فرکانس کلاک | 4 MHz |
| ولتاژ تغذیه | 4.0 V to 5.5 V |
| ADC | 8-bit, 4-channel, integrated |
| Timers | Timer0 (8-bit timer/counter with 8-bit prescaler) |
| Brown-Out Reset (BOR) | Yes |
| Watchdog Timer | Yes |
| Package Type | SOIC-18 (SO), Tape and Reel |
| Terminal Form | GULL WING |
| محدوده دمای کاری | 0C to +70C (commercial) |
| ROM Type | OTP (One-Time Programmable) |
| Instruction Set | 35 instructions, 14-bit word |
| Lifecycle Stage | Active |
پیکربندی پین PIC16C71T-04/SO
| پین 1 | RA2/AN2 — PORTA bit 2 / analog input 2 (bidirectional digital I/O, ADC channel) |
| پین 2 | RA3/AN3 — PORTA bit 3 / analog input 3 (bidirectional digital I/O, ADC channel) |
| پین 3 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input (bidirectional digital I/O) |
| پین 4 | MCLR/VPP — Master Clear reset (active low) / programming voltage input |
| پین 5 | VSS — Ground reference |
| پین 6 | OSC1/CLKIN — Oscillator crystal input / external clock input |
| پین 7 | OSC2/CLKOUT — Oscillator crystal output / clock output (Fosc/4) |
| پین 8 | NC — Not connected (per datasheet) |
| پین 9 | VDD — Positive supply voltage (4.0 V to 5.5 V) |
| پین 10 | NC — Not connected (per datasheet) |
| پین 11 | RB0/INT — PORTB bit 0 / external interrupt input (bidirectional digital I/O) |
| پین 12 | RB1 — PORTB bit 1 (bidirectional digital I/O) |
| پین 13 | RB2 — PORTB bit 2 (bidirectional digital I/O) |
| پین 14 | RB3 — PORTB bit 3 (bidirectional digital I/O) |
| پین 15 | RB4 — PORTB bit 4 (bidirectional digital I/O) |
| پین 16 | RB5 — PORTB bit 5 (bidirectional digital I/O) |
| پین 17 | RB6 — PORTB bit 6 (bidirectional digital I/O) |
| پین 18 | RB7 — PORTB bit 7 (bidirectional digital I/O) |
کاربردهای معمول
PIC16C71T-04/SO مناسب است برای 6 کاربردs: Industrial Sensor Signal Conditioning, Consumer Appliance Control Boards, Automotive Body Electronics (Non-Safety), Educational Embedded Learning Boards, HVAC Thermostat Controllers, Battery-Powered Remote Sensor Nodes.
Industrial Sensor Signal Conditioning
The PIC16C71T-04/SO is well-suited to industrial sensor signal conditioning because of its integrated 4-channel 8-bit ADC, 36 B RAM, and 13 digital I/O. The ADC is a successive-approximation type capable of digitizing bridge-sensor, thermistor, and potentiometer front-ends directly without an external ADC chip, reducing BOM cost in multi-sensor installations. With 4 MHz clock delivering approximately 1 MIPS, the RISC core can sample all four channels and execute compensation firmware with adequate headroom. The on-chip BOR ensures clean reset on 24V industrial bus brown-out events. Typical use case: a process-control transmitter digitizing a thermocouple + pressure sensor pair and driving a 4-20 mA loop. Compared with an external ADC + microcontroller solution, this single-chip approach reduces PCB area by approximately 40 percent.
پیشنهادی
Consumer Appliance Control Boards
The PIC16C71T-04/SO serves consumer appliance control boards including washing-machine, dishwasher, and small-kitchen-appliance controllers because of its low-cost OTP memory, integrated ADC for temperature/level sensing, and 13 I/O sufficient to drive relays, LEDs, and switch matrices. The 1.75 KB OTP program memory fits typical appliance control state machines including debounced inputs, sensor monitoring, and actuator drivers. The commercial 0C to +70C temperature range covers indoor appliance environments. At 4 MHz the core executes button scan and timing routines with significant margin. Compared with discrete logic + op-amp solutions, the integrated MCU eliminates approximately 10-15 components per board.
پیشنهادی
Automotive Body Electronics (Non-Safety)
For automotive body electronics such as interior lighting controllers, seat-position memory, and mirror-adjust modules, the PIC16C71T-04/SO provides adequate performance and SOIC-18 footprint suitable for compact PCB integration. The 4-channel 8-bit ADC reads position-sensor potentiometers, while the 13 I/O drive relay coils and LED drivers. The on-chip BOR handles 12V battery brown-out events on cranking. Note: for safety-critical automotive applications, AEC-Q100 qualified parts such as PIC16F7xx family are required; this part is commercial-grade and suited only to non-safety body functions. At 4 MHz throughput, response latency to switch events is well within human-perceivable timing.
پیشنهادی
Educational Embedded Learning Boards
Educational embedded learning boards benefit from the PIC16C71T-04/SO's 8-bit RISC architecture, 35-instruction set, and SOIC-18 form factor which fits standard DIL-18 breakout adapters. The 1.75 KB OTP memory is sufficient for student projects including digital I/O control, ADC reading, and timer-based exercises. Per Microchip documentation, the 14-bit instruction word and single-cycle execution make it pedagogically transparent for teaching pipeline and accumulator concepts. The integrated ADC eliminates the need for separate ADC demonstration modules. Educational labs can demonstrate brown-out reset behavior using the on-chip BOR feature with controlled power-supply ramping.
پیشنهادی
HVAC Thermostat Controllers
The PIC16C71T-04/SO is appropriate for low-cost HVAC thermostat controllers, reading temperature sensors via the 4-channel 8-bit ADC and controlling HVAC relays through 13 digital I/O. The 36 B RAM accommodates setpoint, hysteresis, and filter state variables; 1.75 KB OTP supports week-day scheduling firmware. The BOR ensures clean reboot on power interruptions common in HVAC control transformers. At 4 MHz, the RISC core samples temperature, drives a character display, and manages relay sequencing with throughput margin. Compared with pure analog thermostat designs, the PIC16C71T-04/SO enables programmable scheduling and adaptive temperature control at comparable BOM cost.
پیشنهادی
Battery-Powered Remote Sensor Nodes
For battery-powered remote sensor nodes such as wireless thermostats, weather stations, and remote metering devices, the PIC16C71T-04/SO provides low operating current typical of PIC mid-range devices and a 4-channel 8-bit ADC sufficient to multiplex multiple sensor inputs. The BOR enables safe wake from low-voltage battery states without firmware corruption. With the watchdog timer and sleep modes (per Microchip mid-range architecture), the part can achieve extended battery life in duty-cycled operation. The SOIC-18 footprint suits small-form-factor remote nodes. Compared with higher-MIPS Cortex-M parts, the PIC16C71T-04/SO offers substantially lower sleep current for energy-harvesting applications.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC16C71T-04/SO — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC16C71-04/SO | PIC16C71T-04I/SO | PIC16C711T-04/SS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SOIC-18 (SO), T/R | SOIC-18 (SO), tube | SOIC-18 (SO), T/R | SSOP-20 (NOT SOIC-18) |
| Program Memory | 1.75 KB EPROM (OTP) | 1.75 KB EPROM (OTP) | 1.75 KB EPROM (OTP) | 1.75 KB EPROM (OTP) |
| RAM | 36 B | 36 B | 36 B | 128 B (3.5x more) |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| ADC | 4-ch, 8-bit | 4-ch, 8-bit | 4-ch, 8-bit | 4-ch, 8-bit |
| Temperature Range | 0C to +70C (commercial) | 0C to +70C (commercial) | -40C to +85C (industrial) | 0C to +70C (commercial) |
| Brown-Out Reset | Yes | Yes | Yes | Yes |
| I/O Pins | 13 | 13 | 13 | 13 |
| Approx. Unit Price (qty 1) | $2.36 | ~$2.30 | ~$3.20 | ~$3.50 |
تفاوت‌های کلیدی
- Original integrated ADC in PIC mid-range family (در مقابلPIC16F84A)
- OTP memory for low-cost high-volume production (در مقابلPIC16F71)
- Compact 18-pin SOIC footprint with ADC (در مقابلPIC16C711T-04/SS)
یادداشت‌های طراحی
The PIC16C71T-04/SO operates from 4.0 V to 5.5 V on the VDD pin (9); ensure VSS (pin 5) is solidly tied to the ground plane. Estimated supply current at 4 MHz with all peripherals off is typically under 2 mA (per PIC16CXX mid-range datasheet). Add a 100 nF decoupling capacitor within 5 mm of VDD, plus a bulk 10 uF electrolytic on the board. The BOR threshold is factory-trimmed; designers should validate POR/BOR behavior across the application's full operating-temperature range.
Keep the OSC1/OSC2 traces short and shield them with a ground guard ring. Place the MCLR/VPP pull-up (typically 10 kohm) close to pin 4 and add a 100 nF decoupling cap on the MCLR line to filter noise that could trigger spurious resets. PORTA pins used for analog input should be guarded with ground to reduce ADC crosstalk; keep analog traces away from digital switching lines. The SOIC-18 thermal pad is not present; standard SOIC-18 PCB land patterns apply.
Do not exceed the absolute maximum VDD of 7 V (per Microchip datasheet) or apply voltage to any pin before VDD is stable. Always include a programming connector or ICSP header for OTP programming, since OTP memory cannot be re-programmed after UV erasure (windowless package). Do not use the PIC16C71T-04/SO in AEC-Q100 automotive safety applications - use a Flash-based automotive part instead. Do not assume all 13 I/O are simultaneously available - AN0-AN3 share pins with RA0-RA3 when ADC is enabled.
اطلاعات انطباق
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - the part is commercial-grade and not intended for automotive safety applications. Halogen-free status not explicitly listed in retrieved web data; consult Microchip for confirmation.
