PIC16C74B-20/PT - 8-Bit 20MHz OTP MCU 7KB | 44-TQFP | Microchip
MPN: PIC16C74B-20/PT ✓ فعالPIC16C74B-20/PT نمای کلی
What is an 8-bit OTP microcontroller? An OTP (One-Time-Programmable) microcontroller is a class of embedded controller that uses non-erasable PROM (programmable read-only memory) for code storage, sitting within the broader hierarchy of microcontroller -> embedded controller -> semiconductor. OTP parts offer a lower-cost alternative to windowed UV-erasable parts in volume production, since the program is written once during manufacturing test and the die lacks the expensive quartz erasure window. PIC mid-range devices use a RISC instruction set (35 single-word instructions) so every instruction executes in one cycle (200 ns at 20 MHz), with program branches taking two cycles.
Key features include 33 I/O pins, hardware USART for serial communication, dual-mode master/slave SSP for SPI or I2C peripherals, and an integrated 8-channel 8-bit ADC that simplifies sensor-interface designs. The PIC16C7X family is code- and pin-compatible with the earlier PIC16C6X family, easing migration. The Watchdog Timer, power-on reset, brown-out reset, and code protection provide robust embedded reliability for industrial control, instrumentation, and consumer appliances.
Architecturally, the PIC16C74B uses a 14-bit instruction word and a Harvard bus architecture that separates program and data memory, allowing instruction fetch and operand read in the same cycle. The mid-range core implements a hardware multiplier-free ALU that performs arithmetic, logical, and bit-manipulation operations on the working register W, with file registers mapped into banked SRAM. The 8-bit ADC uses successive approximation with a sample-and-hold, capable of 20 µs conversion time.
Typical applications include industrial process control, motor drive front-ends (via CCP/PWM), HVAC control boards, instrumentation front-panels, sensor conditioning, security-system panels, and white-goods controllers. Designers select the PIC16C74B-20/PT when they need more I/O and ADC channels than the smaller 28-pin PIC16C73B.
When designing with this part, confirm the production-fit OTP variant is acceptable for your volume (OTP cannot be reprogrammed). For field-updatable firmware, migrate to the flash-based PIC16F74 or PIC18F equivalents, which are drop-in compatible at the pin level. Use MPLAB X IDE with MPASM or XC8 for code development, and the ICD-series in-circuit debuggers for early prototypes.
This page synthesizes verified distributor pricing, pin-compatible same-family alternatives, and practical design guidance specific to the 44-TQFP variant of the PIC16C74B-20/PT - information not found in a single manufacturer datasheet.
جایگزین‌های drop-in برای PIC16C74B-20/PT — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای PIC16C74B-20/PT (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Program Memory Size, Serial Interfaces, Program Memory Type, Core Architecture.
PIC16C74AT-20/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C67-20/PT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16F74-I/PT
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C77-20/PT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC16C74B-20/PT حداکثر مقادیر مجاز و مشخصات الکتریکی
| Family | PIC16C7X (PIC® 16C, mid-range) |
| Core | 8-bit RISC, 35 single-word instructions |
| Clock Speed | 20 MHz maximum |
| Instruction Cycle | 200 ns (4 clock periods) |
| Program Memory Type | OTP (One-Time-Programmable) |
| Program Memory Size | 7 KB (4K x 14 bits) |
| Data RAM | 192 bytes |
| I/O Pins | 33 |
| ADC | 8 channels x 8-bit |
| Timers | Timer0 (8-bit), Timer1 (16-bit), Timer2 (8-bit) |
| CCP/PWM Modules | 2 (Capture/Compare/PWM) |
| Serial Interfaces | SSP (SPI master/slave or I2C) + USART/SCI |
| ولتاژ تغذیه | 4.0 V to 5.5 V |
| بسته‌بندی | 44-pin TQFP (10x10 mm), PT |
| نوع نصب | Surface Mount |
| دمای کاری | 0C to +70C (commercial) |
پیکربندی پین PIC16C74B-20/PT
| پین 1 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| پین 2 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| پین 3 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| پین 4 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / VREF+ |
| پین 5 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| پین 6 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI Slave Select |
| پین 7 | AVDD — Analog supply voltage |
| پین 8 | AVSS — Analog ground |
| پین 9 | OSC1/CLKIN — Oscillator input / external clock |
| پین 10 | OSC2/CLKOUT — Oscillator output / clock out |
| پین 11 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator out / Timer1 clock |
| پین 12 | RC1/T1OSI/CCP1 — PORTC bit 1 / Timer1 oscillator in / CCP1 |
| پین 13 | RC2/CCP1 — PORTC bit 2 / CCP1 |
| پین 14 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| پین 15 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| پین 16 | RC5/SDO — PORTC bit 5 / SPI data out |
| پین 17 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| پین 18 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| پین 19 | VSS — Ground |
| پین 20 | VDD — Digital supply voltage |
| پین 21 | RB0/INT — PORTB bit 0 / External interrupt |
| پین 22 | RB1 — PORTB bit 1 |
| پین 23 | RB2 — PORTB bit 2 |
| پین 24 | RB3 — PORTB bit 3 |
| پین 25 | RB4 — PORTB bit 4 |
| پین 26 | RB5 — PORTB bit 5 |
| پین 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| پین 28 | RB7/PGD — PORTB bit 7 / ICSP data |
| پین 29 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| پین 30 | RD1/PSP1 — PORTD bit 1 / PSP bit 1 |
| پین 31 | RD2/PSP2 — PORTD bit 2 / PSP bit 2 |
| پین 32 | RD3/PSP3 — PORTD bit 3 / PSP bit 3 |
| پین 33 | RC4/PSP4 — PORTE bit 0 / PSP read / PSP bit 4 |
| پین 34 | RE1/WR/PSP5 — PORTE bit 1 / PSP write / PSP bit 5 |
| پین 35 | RE2/CS/PSP6 — PORTE bit 2 / PSP chip select / PSP bit 6 |
| پین 36 | RD4/PSP7 — PORTD bit 4 / PSP bit 7 |
| پین 37 | RD5/PSP6 — PORTD bit 5 / PSP bit 6 |
| پین 38 | RD6/PSP7 — PORTD bit 6 / PSP bit 7 |
| پین 39 | RD7/PSP7 — PORTD bit 7 / PSP bit 7 |
| پین 40 | VSS — Ground |
| پین 41 | VDD — Digital supply voltage |
| پین 42 | RB0 — [DATA_NEEDED: secondary function assignment] |
| پین 43 | OSC1 — [DATA_NEEDED: secondary function] |
| پین 44 | MCLR/VPP — Master clear / ICSP programming voltage |
کاربردهای معمول
PIC16C74B-20/PT مناسب است برای 6 کاربردs: Industrial Process Control, HVAC Control Board, Motor Drive Front-End, Instrumentation Front-Panel, Security System Panel, White-Goods / Appliance Controller.
Industrial Process Control
The PIC16C74B-20/PT's 8-channel 8-bit ADC and 33 digital I/O make it well-suited for PLC-style industrial process control boards monitoring temperature, pressure, and flow sensors. The 20 MHz RISC core with 200 ns instruction cycle provides deterministic loop times for PID control, while the 4.0-5.5 V supply range tolerates 5 V industrial backplanes. The USART enables Modbus RTU or proprietary RS-485 communication with a transceiver, and the CCP/PWM modules drive valve actuators and SSR control outputs. The integrated brown-out reset protects against brown-out corruption in plant 24 V/5 V rails.
پیشنهادی
HVAC Control Board
The PIC16C74B-20/PT integrates the I/O count and ADC channels needed for HVAC controller boards driving relays, triacs, and variable-speed fans. The 8-channel ADC digitizes thermistor temperature sensors (NTC/PTC), while two CCP/PWM modules generate phase-cut dimming or motor speed-control signals. The MSSP in I2C mode talks to EEPROM or RTC companions, while the USART links to a wall thermostat or building management system. The commercial 0C to +70C temperature range suits indoor equipment enclosures.
پیشنهادی
Motor Drive Front-End
For BLDC or stepper motor front-ends, the PIC16C74B-20/PT uses its dual CCP/PWM modules to generate complementary PWM signals at up to 20 MHz timer resolution, while the 8-bit ADC samples back-EMF or current-sense shunt signals. The 33 I/O drive Hall-sensor inputs, fault flags, and gate-driver enable lines without external muxing. OTP program memory is acceptable for fixed-commutation trapezoidal drives in high-volume appliance motors (washing machines, fans, pumps) where firmware is factory-locked.
پیشنهادی
Instrumentation Front-Panel
Laboratory instruments and test-equipment front-panels benefit from the PIC16C74B-20/PT's SPI master port driving LCD or dot-matrix displays, plus the USART streaming measurement data to a host PC. The 192-byte RAM is sufficient for menu state machines and peak/average calculation buffers, while the 8-bit ADC reads front-panel knob positions or analog trim pots. The 5 V supply simplifies integration with legacy op-amp signal chains in benchtop multimeters, oscilloscopes, and calibrators.
پیشنهادی
Security System Panel
Alarm panels for intrusion detection use the PIC16C74B-20/PT to scan 8+ zone inputs through the on-chip ADC or digital I/O, while the USART links to a central monitoring station via dialer or GSM module. OTP program memory prevents firmware tampering - a security advantage over flash parts that can be reprogrammed via debug ports. The PIC16C74B-20/PT 20 MHz core handles keypad scanning and encryption-light protocol framing for low-cost residential and small-commercial panels.
پیشنهادی
White-Goods / Appliance Controller
Washing machines, dishwashers, ovens, and refrigerators use PIC16C74B-20/PT controllers for their 33 I/O driving user-interface keypads, segment LCDs, buzzer drivers, and triac-fired heater/valve outputs. The 8-channel ADC reads temperature, water level, and motor current, while the CCP/PWM modules generate proportional control signals. OTP memory locks the appliance firmware against field tampering, and the 44-TQFP PT package is a cost-optimized SMD form factor for high-volume white-goods manufacturing.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای PIC16C74B-20/PT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | PIC16C74AT-20/PT | PIC16C67-20/PT | PIC16F74-I/PT | PIC16C77-20/PT |
|---|---|---|---|---|---|
| Package | 44-TQFP (PT) | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory Type | OTP (7 KB) | OTP (7 KB) | OTP (7 KB) | Flash (7 KB) - advantage | OTP (14 KB) - larger |
| Clock Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| I/O Pins | 33 | 33 | 33 | 33 | 33 |
| ADC Channels | 8 ch x 8-bit | 8 ch x 8-bit | 0 ch (no ADC) | 8 ch x 8-bit | 8 ch x 8-bit |
| CCP/PWM | 2 modules | 2 modules | 2 modules | 2 modules | 2 modules |
| Serial Interfaces | SPI/I2C + USART | SPI/I2C + USART | SPI/I2C + USART | SPI/I2C + USART | SPI/I2C + USART |
| Lifecycle / Best Use | Active OTP (legacy cost-down) | Legacy 'A' silicon - not recommended for new designs | Active - choose when no ADC needed | Active flash - recommended replacement | Active - larger memory upgrade |
تفاوت‌های کلیدی
- Larger ADC channel count within PIC16C7X 44-pin family (در مقابلPIC16C67-20/PT)
- Drop-in flash reprogrammability for field-updatable designs (در مقابلPIC16F74-I/PT)
- Double program memory upward migration path (در مقابلPIC16C77-20/PT)
یادداشت‌های طراحی
Estimated: at VDD=5.0 V, 20 MHz clock, all peripherals active, the PIC16C74B-20/PT draws approximately 15-20 mA ICC; OTP read during execution is the largest contributor. Add a 100 nF ceramic decoupling cap as close as physically possible to VDD/VSS pins 20 and 19, plus a bulk 10 uF tantalum or aluminum on the 5 V rail. The internal brown-out reset (BOR) should be enabled in configuration bits to protect RAM contents during supply droops in 24 V/5 V industrial backplanes.
The 44-pin TQFP (PT) has a 0.8 mm pitch - place 4 vias under the exposed die-pad region for thermal relief and ground stitching. Keep the analog AVSS/AVDD pair shorted to the digital ground at a single point (star ground) to prevent ADC digital switching noise from coupling into analog readings. Place the 20 MHz crystal (or resonator) within 5 mm of OSC1/OSC2 (pins 9-10) with a grounded guard ring around the oscillator traces to suppress radiated EMI from the 20 MHz fundamental.
OTP (One-Time-Programmable) memory cannot be erased after programming - the 'C' in PIC16C74B signals erasable windowed UVPROM is NOT present on the PT package. Production programmers must verify code at runtime with a checksum or signature verification before locking the device via CONFIG bits. Also: the MCLR pin (44) is a programming-voltage input during ICSP; leave a 10 kohm pull-up to VDD and route the ICSP connector so production programming can occur after PCB assembly. Failure to disable ICD/ICSP via CONFIG will leave the test pins RB6/RB7 unavailable for GPIO.
Estimated: at full I/O toggle on all 33 pins driving 20 mA each (above spec), the PIC16C74B-20/PT in 44-TQFP could dissipate ~1.5 W; under typical 5-10 mA per-pin sourcing the dissipation is far lower (under 0.5 W). The 44-TQFP (PT) has theta_JA approximately 50 C/W on a 4-layer JEDEC test board - well within commercial 0-70C operation without a heatsink. In a sealed enclosure above 50 C ambient, derate the per-pin source current to 10 mA or migrate to the PIC18F equivalent with a wider temperature range.
اطلاعات انطباق
RoHS/REACH/lead-free compliance status for the PIC16C74B-20/PT commercial-grade 44-TQFP PT package is not confirmed in the verified web data and is marked [DATA_NEEDED]. The legacy PIC16C OTP 'B' family carries mixed compliance by date code; verify against Microchip's Certificate of Conformance for the specific date/lot code in production. AEC-Q100 is not applicable - this is a commercial-grade (0C to +70C) part; for automotive-grade pin-compatible alternatives consider PIC16F74T-I/PT (industrial) or PIC18F equivalents.
